Abstract

IEC 60794-1-122:2026 specifies the test procedures used to establish uniform requirements for optical fibre cables on the mechanical properties. This document is used to check the buffered fibre movement under compression in optical fibre cables for use in patch cords. This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors.
IEC 60794-1-122:2026 cancels and replaces Method E22 of the first edition of IEC 60794-1-21 published in 2015. This edition includes the following significant technical changes with respect to IEC 60794-1-21:2015:
a) addition of "11 Details to be reported".

Status
Published
Publication Date
28-Oct-2026
Technical Committee
SC 86A - Fibres and cables
Current Stage
PPUB - Publication issued
Start Date
29-Oct-2026
Completion Date
20-Nov-2026

Buy Documents

Standard

IEC 60794-1-122:2026 - Optical fibre cables - Part 1-122: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Buffered fibre movement under compression in optical fibre cables for use in patch cords, Method E22

ISBN:978-2-8327-1566-6
Release Date:29-Oct-2026
English language (8 pages)
sale 15% off
Preview
sale 15% off
Preview
Standard

IEC 60794-1-122:2026 - Câbles a fibres optiques - Partie 1-122: Spécification générique - Procédures fondamentales d’essais des câbles optiques - Méthodes d’essais mécaniques - Mouvement des fibres sous revetement protecteur sous l’effet d’une compression dans les câbles a fibres optiques utilisés comme cordons de brassage, Méthode E22

ISBN:978-2-8327-1566-6
Release Date:29-Oct-2026
French language (8 pages)
sale 15% off
Preview
sale 15% off
Preview

IEC 60794-1-122:2026 is an International Standard published by the IEC for testing optical fibre cables. It specifies Method E22 for checking buffered fibre movement under compression in optical fibre cables used in patch cords, so manufacturers, test laboratories, and buyers can compare mechanical behaviour under a defined test setup.

What does IEC 60794-1-122:2026 specify?

IEC 60794-1-122:2026 specifies a mechanical test method for optical fibre cables, with a focus on buffered fibre movement under axial compression. The method applies to optical fibre cables for telecommunication equipment and similar devices, including cables that combine optical fibres and electrical conductors.

The document is organized into clauses for scope, normative references, terms and definitions, general requirements, object, sample, apparatus, procedure, requirements, details to be specified, and details to be reported. It also includes one figure showing the test set-up and a bibliography entry for attenuation monitoring.

What are the key requirements of IEC 60794-1-122:2026?

IEC 60794-1-122:2026 sets out a defined sample, apparatus, procedure, and reporting package so the test can be repeated in a comparable way.

1. The test checks two measured effects

Clause 5 says the purpose is to examine attenuation change and reaction force when a buffered fibre moves under axial compression only. In practice, the method checks whether compression causes unacceptable signal loss or mechanical resistance.

2. The cable sample is prepared in a specific way

Clause 6 calls for a 5.0 m cable sample from finished cable length. Two 2.0 m end sections are removed, leaving a 1.0 m central sheathed section. This standard sample preparation matters because the exposed fibre length and cable restraint affect the movement being measured.

3. The apparatus must control compression and measure force

Clause 7 requires a cable attachment device, a fibre chuck, a load cell with maximum error of ±3 %, and attenuation monitoring equipment. The chuck must be able to move toward the cable end over an adjustable distance, with a fixed 7 mm distance between the chuck and the cable end. This gives a controlled mechanical input and a measurable force reading.

4. The procedure uses standard atmospheric conditions

Clause 8 says the test is carried out under the standard atmospheric conditions specified in IEC 60794-1-2. The cable end is clamped, the buffered fibre is attached to the chuck, and the opposite end is fixed so the fibre cannot move within the sample. In practice, that isolates the compression effect being tested.

5. Compression distance and movement rate come from the relevant specification

Clause 8 calls for the chuck to move gradually by 0.4 mm, or by another compression distance stated in the relevant specification, at the specified movement rate. If multiple movements are required, the chuck returns to the start position and the cycle is repeated. This lets product specifications define how severe the test is.

6. Acceptance is based on specified limits

Clause 9 says the change in attenuation and the reaction force at the specified distance shall not exceed the values given in the relevant specification. For users, this means the method itself is not a pass-fail limit document - the product or procurement specification must set the limits.

7. The product specification must state the test details

Clause 10 requires the relevant specification to state the compression distance, maximum allowable attenuation change, number of movements, and maximum allowable reaction force. This is the information a buyer or designer needs to make the method usable for a конкрет product.

8. Reporting must capture the measured result and any deviations

Clause 11 adds reporting requirements, including the cable sample description, measured reaction force in N, measured attenuation change in dB, and any deviations from the method. This supports traceable test records and comparison between laboratories.

What terms does IEC 60794-1-122:2026 define?

IEC 60794-1-122:2026 relies on the terminology in IEC 60794-1-1, and uses these key terms in the method:

  • Optical fibre cable - the cable type under test, including cable forms that may also contain electrical conductors.
  • Buffered fibre - the fibre element whose movement under compression is being examined.
  • Attenuation - the signal loss monitored during the test.
  • Attenuation change - the change in signal loss caused by compression, which is one of the key outputs.
  • Reaction force - the force measured at the chuck as the buffered fibre is compressed.
  • Patch cords - the application area for which the cable method is intended.

Who uses IEC 60794-1-122:2026?

IEC 60794-1-122:2026 is used by optical fibre cable manufacturers, test laboratories, and quality teams that need to verify mechanical behaviour of cables intended for patch cords. It is also relevant to purchasers and specification writers who need a common test method for product acceptance, qualification, or supplier comparison.

What changed in IEC 60794-1-122:2026 from the previous edition?

IEC 60794-1-122:2026 cancels and replaces Method E22 of IEC 60794-1-21:2015. The stated technical change is the addition of Clause 11, “Details to be reported.” The introduction also says the document reflects the new structure and numbering system for optical fibre cable test methods.

Which standards are used with IEC 60794-1-122:2026?

IEC 60794-1-1 provides the general terminology used for this method. IEC 60794-1-2 provides the general requirements, standard atmospheric conditions, and general guidance for test methods. IEC 60793-1-46 is cited for attenuation monitoring equipment and the measurement approach used to track changes in attenuation.

What does the IEC 60794-1-122:2026 document contain?

IEC 60794-1-122:2026 contains the full test method description, the apparatus definition, the procedural steps, and the reporting requirements for buffered fibre movement under compression. Figure 1 shows the test set-up, including the cable clamping device, fibre chuck, load cell, and attachment point. The document also identifies what a relevant specification must state before the test is run.

Relations

Effective Date
07-Jun-2024

Buy Documents

Standard

IEC 60794-1-122:2026 - Optical fibre cables - Part 1-122: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Buffered fibre movement under compression in optical fibre cables for use in patch cords, Method E22

ISBN:978-2-8327-1566-6
Release Date:29-Oct-2026
English language (8 pages)
sale 15% off
Preview
sale 15% off
Preview
Standard

IEC 60794-1-122:2026 - Câbles a fibres optiques - Partie 1-122: Spécification générique - Procédures fondamentales d’essais des câbles optiques - Méthodes d’essais mécaniques - Mouvement des fibres sous revetement protecteur sous l’effet d’une compression dans les câbles a fibres optiques utilisés comme cordons de brassage, Méthode E22

ISBN:978-2-8327-1566-6
Release Date:29-Oct-2026
French language (8 pages)
sale 15% off
Preview
sale 15% off
Preview

Get Certified

Connect with accredited certification bodies for this standard

ANCE

Mexican certification and testing association.

EMA Mexico Verified

Intertek Slovenia

Intertek testing, inspection, and certification services in Slovenia.

UKAS Slovenia Verified

LNE (Laboratoire National de Métrologie et d'Essais)

French national laboratory for metrology and testing.

COFRAC France Verified

Sponsored listings

Frequently Asked Questions

IEC 60794-1-122:2026 is a standard published by the International Electrotechnical Commission (IEC). Its full title is "Optical fibre cables - Part 1-122: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Buffered fibre movement under compression in optical fibre cables for use in patch cords, Method E22". This standard covers: IEC 60794-1-122:2026 specifies the test procedures used to establish uniform requirements for optical fibre cables on the mechanical properties. This document is used to check the buffered fibre movement under compression in optical fibre cables for use in patch cords. This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. IEC 60794-1-122:2026 cancels and replaces Method E22 of the first edition of IEC 60794-1-21 published in 2015. This edition includes the following significant technical changes with respect to IEC 60794-1-21:2015: a) addition of "11 Details to be reported".

IEC 60794-1-122:2026 specifies the test procedures used to establish uniform requirements for optical fibre cables on the mechanical properties. This document is used to check the buffered fibre movement under compression in optical fibre cables for use in patch cords. This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. IEC 60794-1-122:2026 cancels and replaces Method E22 of the first edition of IEC 60794-1-21 published in 2015. This edition includes the following significant technical changes with respect to IEC 60794-1-21:2015: a) addition of "11 Details to be reported".

IEC 60794-1-122:2026 is classified under the following ICS (International Classification for Standards) categories: 33.180.10 - Fibres and cables. The ICS classification helps identify the subject area and facilitates finding related standards.

IEC 60794-1-122:2026 has the following relationships with other standards: It is inter standard links to IEC 60794-1-21:2015. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

IEC 60794-1-122:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


IEC 60794-1-122 ®
Edition 1.0 2026-10
INTERNATIONAL
STANDARD
Optical fibre cables
Part 1-122: Generic specification - Basic optical cable test procedures -
Mechanical tests methods - Buffered fibre movement under compression in
optical fibre cables for use in patch cords, Method E22
ICS 33.180.10 ISBN 978-2-8327-1566-6

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or
by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either
IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC copyright
or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local
IEC member National Committee for further information.

IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - IEC Products & Services Portal - products.iec.ch
webstore.iec.ch/advsearchform Discover our powerful search engine and read freely all the
The advanced search enables to find IEC publications by a publications previews, graphical symbols and the glossary.
variety of criteria (reference number, text, technical With a subscription you will always have access to up to date
committee, …). It also gives information on projects, content tailored to your needs.
replaced and withdrawn publications.
Electropedia - www.electropedia.org
The world's leading online dictionary on electrotechnology,
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published containing more than 22 500 terminological entries in English
details all new publications released. Available online and and French, with equivalent terms in 25 additional languages.
once a month by email. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer
Service Centre: sales@iec.ch.
CONTENTS
FOREWORD . 2
INTRODUCTION . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General requirements . 5
5 Object . 5
6 Sample . 5
7 Apparatus . 6
8 Procedure . 6
9 Requirements . 7
10 Details to be specified . 7
11 Details to be reported . 7
Bibliography . 8

Figure 1 – Test set-up for fibre movement under compression . 7

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
Optical fibre cables -
Part 1-122: Generic specification - Basic optical cable test procedures -
Mechanical test methods - Buffered fibre movement under compression in
optical fibre cables for use in patch cords, Method E22

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibilit
...


IEC 60794-1-122 ®
Édition 1.0 2026-10
NORME
INTERNATIONALE
Câbles à fibres optiques
Partie 1-122: Spécification générique - Procédures fondamentales d’essais des
câbles optiques - Méthodes d’essais mécaniques - Mouvement des fibres sous
revêtement protecteur sous l’effet d’une compression dans les câbles à fibres
optiques utilisés comme cordons de brassage, Méthode E22
ICS 33.180.10 ISBN 978-2-8327-1566-6

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC -  IEC Products & Services Portal - products.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications gratuitement tous les aperçus des publications, symboles
IEC en utilisant différents critères (numéro de référence, graphiques et le glossaire. Avec un abonnement, vous aurez
texte, comité d’études, …). Elle donne aussi des toujours accès à un contenu à jour adapté à vos besoins.
informations sur les projets et les publications remplacées
ou retirées. Electropedia - www.electropedia.org
Le premier dictionnaire d'électrotechnologie en ligne au
IEC Just Published - webstore.iec.ch/justpublished monde, avec plus de 22 500 articles terminologiques en
Restez informé sur les nouvelles publications IEC. Just anglais et en français, ainsi que les termes équivalents
dans 25 langues additionnelles. Egalement appelé
Published détaille les nouvelles publications parues.
Disponible en ligne et une fois par mois par email. Vocabulaire Electrotechnique International (IEV) en ligne.

Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-
nous: sales@iec.ch.
SOMMAIRE
AVANT-PROPOS . 2
INTRODUCTION . 4
1 Domaine d’application . 5
2 Références normatives . 5
3 Termes et définitions . 5
4 Exigences générales . 5
5 Objet . 5
6 Échantillon . 6
7 Appareillage . 6
8 Procédure . 6
9 Exigences . 7
10 Informations détaillées à spécifier . 7
11 Informations détaillées à consigner. 7

Figure 1 – Montage d'essai du mouvement de fibre sous compression. 7

COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
Câbles à fibres optiques -
Partie 1-122: Spécification générique - Procédures fondamentales
d’essais des câbles optiques - Méthodes d’essais mécaniques -
Mouvement des fibres sous revêtement protecteur sous l’effet
d’une compression dans les câbles à fibres optiques utilisés
comme cordons de brassage, Méthode E22

AVANT-PROPOS
1) La Commission Électrotechnique Internationale (IEC) est une organisation mondiale de normalisation composée
de l'ensemble des comités électrotechniques nationaux (Comités nationaux de l'IEC). L'IEC a pour objet de
favoriser la coopération internationale pour toutes les questions de normalisation dans les domaines de
l'électricité et de l'électronique. À cet effet, l'IEC – entre autres activités – publie des Normes internationales,
des Spécifications techniques, des Rapports techniques, des Spécifications accessibles au public (PAS) et des
Guides (ci-après dénommés "Publication(s) de l'IEC"). Leur élaboration est confiée à des comités d'études, aux
travaux desquels tout Comité national intéressé par le sujet traité peut participer. Les organisations
internationales, gouvernementales et non gouvernementales, en liaison avec l'IEC, participent également aux
travaux. L'IEC collabore étroitement avec l'Organisation Internationale de Normalisation (ISO), selon des
conditions fixées par accord entre les deux organisations.
2) Les décisions ou accords officiels de l'IEC concernant les questions techniques représentent, dans la mesure du
possible, un accord international sur les sujets étudiés, étant donné que les Comités nationaux de l'IEC intéressés
sont représentés dans chaque comité d'études.
3) Les Publications de l'IEC se présentent sous la forme de recommandations internationales et sont agréées
comme telles par les Comités nationaux de l'IEC. Tous les efforts raisonnables sont entrepris afin que l'IEC
s'assure de l'exactitude du contenu technique de ses publications; l'IEC ne peut pas être tenue responsable de
l'éventuelle mauvaise utilisation ou interprétation qui en est faite par un quelconque utilisateur final.
4) Dans le but d'encourager l'uniformité internationale, les Comités nationaux de l'IEC s'engagent, dans toute la
mesure possible, à appliquer de façon transparente les Publications de l'IEC dans leurs publications nationales
et régionales. Toutes divergences entre toutes Publications de l'IEC et toutes publications nationales ou
régionales correspondantes doivent être indiquées en termes clairs dans ces dernières.
5) L'IEC elle-même ne fournit aucune attestation de conformité. Des organismes de certification indépendants
fournissent des services d'évaluation de conformité et, dans certains secteurs, accèdent aux marques de
conformité de l'IEC. L'IEC n'est responsable d'aucun des services effectués par les organismes de certification
indépendants.
6) Tous les utilisateurs doivent s'assurer qu'ils sont en possession de la dernière édition de cette publication.
7) Aucune responsabilité ne doit être imputée à l'IEC, à ses administrateurs, employés, auxiliaires ou mandataires,
y compris ses experts particuliers et les membres de ses comités d'études et des Comités nationaux de l'IEC,
pour tout préjudice causé en cas de dommages corporels et matériels, ou de tout autre dommage de quelque
nature que ce soit, directe ou indirecte, ou pour supporter les coûts (y compris les frais de justice) et les dépenses
découlant de la publication ou de l'utilisation de cette Publication de l'IEC ou de toute autre Publication de l'IEC,
ou au crédit qui lui est accordé.
8) L'attention est attirée sur les références normatives citées dans cette publication. L'utilisation de publications
référencées est obligatoire pour une application correcte de la présente publication.
9) L'IEC attire l'attention sur le fait que la mise en application du présent document peut entraîner l'utilisation d'un
ou de plusieurs brevets. L'IEC ne prend pas position quant à la preuve, à la validité et à l'applicabilité de tout
droit de brevet revendiqué à cet égard. À la date de publication du présent document, l'IEC n'a pas reçu
notification qu'un ou plusieurs brevets pouvaient être nécessaires à sa mise en application. Toutefois, il y a lieu
d'avertir les responsables de la mise en application du présent document que de
...