EN 60169-23:1993
(Main)Radio-frequency connectors - Part 23: Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in)
Radio-frequency connectors - Part 23: Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in)
Covers a precision pin and socket connector for use with 3,5 mm rigid precision coaxial lines so as to minimize test apparatus errors attributable to coaxial connectors. These connectors are constructed so as to affix on the 50 ohm, 3,5 mm rigid precision coaxial line described in HD 351.5 and to provide low reflection to 34 GHz.
Hochfrequenz-Steckverbinder - Teil 23: Stift- und Buchsen-Stecker für 3,5 mm Präzisions-Koaxial-Leitungen mit einem Innendurchmesser des Außenleiters von 3,5 mm (0,1378 in)
Connecteurs pour fréquences radioélectriques - Partie 23: Connecteur mâle et femelle pour lignes rigides coaxiales de précision de 3,5 mm avec diamètre intérieur du conducteur extérieur de 3,5 mm (0.1378 in)
Couvre un connecteur de précision mâle et femelle pour ligne rigide de précision coaxiale de 3,5 mm afin de diminuer les erreurs de l'appareillage d'essai dues aux connecteurs coaxiaux. Ces connecteurs sont fabriqués pour raccorder la ligne coaxiale rigide de précision de 50 ohm 3,5 mm décrite dans la HD 351.5 et pour avoir une réflexion de faible niveau à 34 GHz.
Radio-frequency connectors - Part 23: Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in) (IEC 60169-23:1991)
General Information
- Status
- Published
- Publication Date
- 07-Sep-1993
- Withdrawal Date
- 31-Jul-1994
- Technical Committee
- CLC/SR 46F - RF and microwave passive components
- Drafting Committee
- IEC/SC 46F - IEC_SC_46F
- Parallel Committee
- IEC/SC 46F - IEC_SC_46F
- Current Stage
- 6060 - Document made available - Publishing
- Start Date
- 08-Sep-1993
- Completion Date
- 08-Sep-1993
Relations
- Effective Date
- 08-Oct-2025
- Effective Date
- 03-Feb-2026
Overview
EN 60169-23:1993 is a European Standard developed by the CLC (European Committee for Electrotechnical Standardization) that specifies the design and interface requirements for radio-frequency (RF) pin and socket connectors. These connectors are intended for use with 3,5 mm rigid precision coaxial lines, featuring an inner diameter of 3,5 mm (0.1378 in). The primary aim of this standard is to ensure high accuracy and low reflection in RF test and measurement environments, minimizing errors attributed to coaxial connectors, up to frequencies as high as 34 GHz.
Key Topics
- Precision Pin and Socket Connectors: Details requirements for connectors engineered for rigid precision coaxial lines, supporting consistent 50 ohm impedance.
- Mating Face Details: Specifies interface dimensions for two connector types:
- GPC (General Precision Connector) - instrument grade (beaded)
- LPC (Laboratory Precision Connector) - instrument grade (beadless)
- Frequency Performance: Defines construction to ensure low reflection (VSWR) up to 34 GHz, supporting applications at frequencies above 18 GHz.
- Compatibility: Stipulates that these connectors are designed for 3,5 mm coaxial lines as per HD 351.5 (IEC 457-5), and are often interoperable with SMA connectors, enhancing versatility in RF environments.
- Minimizing Measurement Error: Focuses on precision construction and interface to reduce measurement uncertainties in test setups.
Applications
EN 60169-23:1993 pin and socket connectors are crucial in various high-frequency and precision contexts, including:
- RF Test and Measurement Equipment: Used extensively in laboratories and calibration settings for accurate RF signal testing due to their low reflection and precise impedance matching.
- Communication Infrastructure: Supports high-frequency signal integrity in broadcast, telecommunications, and network analysis installations.
- Microwave Systems: Appropriate for systems requiring minimal connector-induced losses at frequencies up to 34 GHz.
- Research and Development: Frequently employed in scientific research requiring repeatable and reliable RF connections.
- Intercompatibility: Commonly used where SMA-style compatibility is necessary, providing flexibility in integrating with other standard connectors.
Related Standards
Several standards are closely associated with EN 60169-23:1993, reinforcing global uniformity and compatibility for radio-frequency connector interfaces:
- IEC 60169-1: General requirements and measuring methods for RF connectors.
- IEC 457-5 (HD 351.5): Specifies the construction of 50 ohm, 3,5 mm rigid precision coaxial lines and their associated connectors.
- IEC 60169-15/SMA Connectors: Outlines dimensions and requirements for SMA connectors, often used interchangeably in similar applications.
- EN 60169 Series: Additional parts cover other RF coaxial connectors, supporting a wide range of interface needs in the industry.
Practical Value
By adhering to EN 60169-23:1993, manufacturers and users ensure high performance, reliability, and consistency of RF connections in demanding measurement and communication environments. The standard's specification of connector dimensions, materials, and electrical performance criteria provides:
- Interchangeability: Ensures connectors from different suppliers can mate properly and function reliably.
- Measurement Accuracy: Reduces signal loss and reflections, improving the quality and reproducibility of high-frequency measurements.
- Long-Term Reliability: Supports connector durability and performance over repeated use cycles in laboratory and industrial settings.
This standard is essential for anyone involved in the design, production, and application of high-frequency RF connectors and systems.
Frequently Asked Questions
EN 60169-23:1993 is a standard published by CLC. Its full title is "Radio-frequency connectors - Part 23: Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in)". This standard covers: Covers a precision pin and socket connector for use with 3,5 mm rigid precision coaxial lines so as to minimize test apparatus errors attributable to coaxial connectors. These connectors are constructed so as to affix on the 50 ohm, 3,5 mm rigid precision coaxial line described in HD 351.5 and to provide low reflection to 34 GHz.
Covers a precision pin and socket connector for use with 3,5 mm rigid precision coaxial lines so as to minimize test apparatus errors attributable to coaxial connectors. These connectors are constructed so as to affix on the 50 ohm, 3,5 mm rigid precision coaxial line described in HD 351.5 and to provide low reflection to 34 GHz.
EN 60169-23:1993 has the following relationships with other standards: It is inter standard links to EN IEC 61169-23:2025, HD 351.5 S1:1986. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 60169-23:1993 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-1998
Radio-frequency connectors - Part 23: Pin and socket connector for use with 3,5
mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm
(0,1378 in) (IEC 60169-23:1991)
Radio-frequency connectors -- Part 23: Pin and socket connector for use with 3,5 mm
rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in)
Hochfrequenz-Steckverbinder -- Teil 23: Stift- und Buchsen-Stecker für 3,5 mm
Präzisions-Koaxial-Leitungen mit einem Innendurchmesser des Außenleiters von 3,5 mm
(0,1378 in)
Connecteurs pour fréquences radioélectriques -- Partie 23: Connecteur mâle et femelle
pour lignes rigides coaxiales de précision de 3,5 mm avec diamètre intérieur du
conducteur extérieur de 3,5 mm (0.1378 in)
Ta slovenski standard je istoveten z: EN 60169-23:1993
ICS:
33.120.30 5DGLRIUHNYHQþQLNRQHNWRUML R.F. connectors
5)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
CEI
NORME
INTERNATIONALE IEC
169-23
INTERNATIONAL
Première édition
STANDARD
First edition
1991-11
Connecteurs pour fréquences radioélectriques
Vingt-troisième partie:
Connecteur mâle et femelle pour lignes
rigides coaxiales de précision de 3,5 mm
avec diamètre intérieur du conducteur extérieur
de 3,5 mm (0,1378 in)
Radio-frequency connectors
Part 23:
Pin and socket connector for use with 3,5 mm
rigid precision coaxial lines with inner diameter
of outer conductor 3,5 mm (0,1378 in)
© CEI 1991 Droits de reproduction réservés —
Copyright — all rights reserved
Aucune partie de
cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized
utilisée sous quelque forme que ce soit et par aucun procédé, in any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission
microfilms, sans l'accord écrit de l'éditeur. in writing from the publisher
Bureau central de la Commission Electrotechnique Inte rnationale 3, rue de Varembé Suisse
Genève
Commission Electrotechnique Internationale CODE PRIX
G
International Electrotechnical Commission PRICE CODE
IEC
MemgyHapooHaa 3newrpolexHH4ecKan HOMHCCHA
Pour prix, vigueur
voir catalogue en •
For price, see current catalogue
- 3 -
169-23 ©IEC
CONTENTS
Page
FOREWORD 5
INTRODUCTION 7
Clause
1 Scope 7
2 Dimensions - Mating face details for GPC and LPC connectors
2.1 Plug connector and contact 9
2.2 Socket connector and contact 11
169-23 ©IEC - 5 -
INTERNATIONAL ELECTROTECHNICAL COMMISSION
RADIO-FREQUENCY CONNECTORS
Pin and socket connector for use with 3,5 mm
Part 23:
rigid precision coaxial lines with inner diameter of
outer conductor 3,5 mm (0,1378 in)
FOREWORD
The formal decisions or agreements of the IEC on technical matters, prepared by Technical Committees on
1)
which all the National Committees having a special interest therein are represented, express, as nearly as
possible, an international consensus of opinion on the subjects dealt with.
They have the form of recommendations for international use and they are accepted by the National
2)
Committees in that sense.
3) In order to promote international unification, the IEC expresses the wish that all National Committees
should adopt the text of the IEC recommendation for their national rules in so far as national conditions will
permit. Any divergence between the IEC recommendation and the corresponding national rules should, as
far as possible, be clearly indicated in the latter.
4) The IEC has not laid down any procedure concerning marking as an indication of approval and has no
responsibility when an item of equipment is declared to comply with one of its recommendations.
This standard has been prepared by Sub-Committee 46D: Connectors for r.f. cables, of
IEC Technical Committee No. 46: Cables, wires, waveguides, r.f. connectors, and access-
ories for communication and signalling.
The text of this standard is based on the following documents:
Six Months' Rule Re
...




Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...