EN 60214:1997
(Main)On-load tap-changers
On-load tap-changers
This standard applies to on-load tap-changers for power transformers, and their motor-drive mechanisms. It relates mainly to tap-changers immersed in transformer oil according to IEC 60296, but may also be used for gas-insulated tap-changers in so far as conditions are applicable.
Stufenschalter
Changeurs de prises en charge
La présente norme s'applique aux changeurs de prises en charge pour les transformateurs de puissance et à leurs mécanismes d'entraînement à moteur. Elle concerne principalement les changeurs de prises immergés dans de l'huile de transformateur conformément à la CEI 60296, mais peut également être utilisée pour les changeurs de prises à isolement dans un gaz, dans la mesure où les conditions le permettent.
On-load tap-changers (IEC 60214:1989, modified)
General Information
- Status
- Withdrawn
- Publication Date
- 13-Aug-1997
- Withdrawal Date
- 28-Feb-1998
- Technical Committee
- CLC/TC 14 - Power transformers
- Drafting Committee
- IEC/TC 14 - IEC_TC_14
- Parallel Committee
- IEC/SC 14B - IEC_SC_14B
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Mar-2006
- Completion Date
- 01-Mar-2006
- Ref Project
SIST EN 60214:1998 - On-load tap-changers
Relations
- Effective Date
- 28-Jan-2023
Get Certified
Connect with accredited certification bodies for this standard
UL Solutions
Global safety science company with testing, inspection and certification.
CEPREI Certification Center (Guangzhou Saibao)
Pioneer of third-party certification, subsidiary of Electronic Fifth Research Institute.
CESI Beijing Certification (Saisi)
Subsidiary of China Electronics Standardization Institute (CESI), established 1963.
Sponsored listings
Frequently Asked Questions
EN 60214:1997 is a standard published by CLC. Its full title is "On-load tap-changers". This standard covers: This standard applies to on-load tap-changers for power transformers, and their motor-drive mechanisms. It relates mainly to tap-changers immersed in transformer oil according to IEC 60296, but may also be used for gas-insulated tap-changers in so far as conditions are applicable.
This standard applies to on-load tap-changers for power transformers, and their motor-drive mechanisms. It relates mainly to tap-changers immersed in transformer oil according to IEC 60296, but may also be used for gas-insulated tap-changers in so far as conditions are applicable.
EN 60214:1997 is classified under the following ICS (International Classification for Standards) categories: 29.120.40 - Switches. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 60214:1997 has the following relationships with other standards: It is inter standard links to EN 60214-1:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 60214:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-1998
On-load tap-changers (IEC 60214:1989, modified)
On-load tap-changers
Stufenschalter
Changeurs de prises en charge
Ta slovenski standard je istoveten z: EN 60214:1997
ICS:
29.120.40 Stikala Switches
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...