EN ISO 3471:2008/prA1
(Amendment)Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements - Amendment 1: Guidance on the use of structural analysis for already certified structures (ISO 3471:2008/DAM 1:2026)
- Status
- Not Published
- Publication Date
- 02-May-2027
- Technical Committee
- CEN/TC 151 - Construction equipment and building material machines - Safety
- Drafting Committee
- CEN/TC 151/WG 1 - Earth-moving machinery - Safety
- Current Stage
- 4599 - Dispatch of FV draft to CMC - Finalization for Vote
- Start Date
- 01-Oct-2026
- Completion Date
- 01-Oct-2026
EN ISO 3471:2008/prA1 is a CEN draft amendment to ISO 3471:2008 for roll-over protective structures (ROPS) on earth-moving machinery. It adds guidance on using structural analysis for already certified structures, mainly for repairs and design changes, while keeping laboratory testing as the reference for new ROPS designs. The document is aimed at manufacturers, test laboratories, engineers and conformity teams that assess the safety of ride-on earth-moving machinery.
What does EN ISO 3471:2008/prA1 specify?
EN ISO 3471:2008/prA1 amends the base ROPS standard rather than replacing it. It corrects one entry in Clause 5.3, Table 1, replaces Annex B with guidance on alterations, physical testing and design changes, and adds Annex ZA for the European regulatory relationship.
The amendment keeps the focus on laboratory tests and performance requirements for ROPS, but it also explains when structural analysis and validated simulation can support changes to an already tested design. It also keeps physical testing as the benchmark for a new ROPS design.
| Annex | What it covers |
|---|---|
| Annex B | Alterations, repairs, alternatives to physical testing, and design changes, including validated numerical simulation models |
| Annex ZA | Relationship with Regulation (EU) 2023/1230 and the corresponding essential requirements |
What are the key requirements of EN ISO 3471:2008/prA1?
EN ISO 3471:2008/prA1 tightens how ROPS may be repaired, modified and revalidated. In practice, it tells manufacturers when they must test again, when simulation can be used, and what evidence they need to keep.
- Clause 5.3, Table 1, row 3 corrects a performance-table value. Users applying the table should use the amended figure in place of the previous one.
- Annex B.1 says a ROPS with discernible deformation shall not be reused, and that alterations or repairs are only allowed when authorized by the manufacturer. This matters because damaged protective structures cannot be returned to service on an informal basis.
- Annex B.2 states that theoretical analysis or numerical simulation of a new ROPS design is not allowed as an alternative to physical testing. New designs still need laboratory evidence.
- Annex B.3.1 says design changes to a ROPS or machine frame normally require physical testing, unless the change is minor and does not adversely affect performance. This gives a narrow path for limited updates.
- Annex B.3.2 allows validated numerical simulation models to support design changes only when the original ROPS design has been physically tested and the modified model is compared with a validated simulation model. The modified design must keep similar global deformation and plastic hinge behaviour, stay below the material fracture threshold, and preserve clearance to the DLV.
- Annex B.3.3 sets out what model correlation has to show: accurate geometry, sequential loading, correct load points and fixtures, measured material properties, and agreement in force-deflection response, overall deformation, DLV clearance and local damage patterns such as plastic hinges, mount deformation and weld cracks. This is the practical checklist for defending a simulation-based claim.
- Annex B.3.4 requires the manufacturer to retain the evaluation documentation. That gives traceability for conformity and later audits.
What terms does EN ISO 3471:2008/prA1 define?
- Roll-over protective structures (ROPS) - Protective structures on earth-moving machinery intended to protect ride-on persons in a roll-over.
- Physical testing - Laboratory testing used to verify the performance of a ROPS design.
- Structural analysis - Analytical or numerical evaluation used in the amendment for controlled assessment of changes to an already tested design.
- Validated numerical simulation model - A simulation model that has been correlated to physical certification test results and can be used to assess design changes.
- Design changes - Modifications to the ROPS or machine frame that may trigger retesting or simulation-based validation.
- Presumption of conformity - The legal effect described in Annex ZA when the standard is cited in the Official Journal of the European Union.
Who uses EN ISO 3471:2008/prA1?
EN ISO 3471:2008/prA1 is used by ROPS manufacturers, earth-moving machinery builders, test laboratories, safety engineers, quality managers and certification teams. They use it when designing a new protective structure, deciding whether a change needs retesting, validating a simulation model, or documenting repairs and modifications to an already certified structure.
It is also relevant to conformity assessment and regulatory work in the EU because Annex ZA links the amendment to Regulation (EU) 2023/1230.
What changed in EN ISO 3471:2008/prA1 from the previous edition?
EN ISO 3471:2008/prA1 is an amendment to ISO 3471:2008. The changes stated in the document are:
- a correction to one value in Clause 5.3, Table 1, row 3
- replacement of Annex B with new guidance on alterations, repairs, physical testing and design changes
- insertion of Annex ZA for the relationship with Regulation (EU) 2023/1230
What does the EN ISO 3471:2008/prA1 document contain?
EN ISO 3471:2008/prA1 contains a targeted amendment rather than a full rewrite. Its main technical content is in Annex B, which covers reuse after deformation, repair authorization, the limits of theoretical analysis, and the conditions for using validated numerical simulation models for design changes.
Annex B also describes how to correlate simulation with physical tests, including force-deflection behaviour, overall deformed shape, DLV clearance, and local damage such as plastic hinges and weld cracks. Figure B.1 illustrates a typical force-deflection curve for lateral or longitudinal loading.
Annex ZA gives the link between the standard and the EU machinery essential requirements, so users working for the European market can see how the normative clauses relate to regulatory conformity.
Relations
- Effective Date
- 26-Mar-2025
Frequently Asked Questions
EN ISO 3471:2008/prA1 is a draft published by the European Committee for Standardization (CEN). Its full title is "Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements - Amendment 1: Guidance on the use of structural analysis for already certified structures (ISO 3471:2008/DAM 1:2026)". This standard covers: Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements - Amendment 1: Guidance on the use of structural analysis for already certified structures (ISO 3471:2008/DAM 1:2026)
Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements - Amendment 1: Guidance on the use of structural analysis for already certified structures (ISO 3471:2008/DAM 1:2026)
EN ISO 3471:2008/prA1 is classified under the following ICS (International Classification for Standards) categories: 53.100 - Earth-moving machinery. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 3471:2008/prA1 has the following relationships with other standards: It is inter standard links to EN ISO 3471:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 3471:2008/prA1 is associated with the following European legislation: EU Directives/Regulations: 2023/1230; Standardization Mandates: M/605. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN ISO 3471:2008/prA1 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2026
Stroji za zemeljska dela - Strukture za zaščito pred prevračanjem - Laboratorijski
preskusi in zahtevane lastnosti - Dopolnilo A1: Smernice za uporabo strukturne
analize pri že certificiranih konstrukcijah (ISO 3471:2008/DAM 1:2026)
Earth-moving machinery - Roll-over protective structures - Laboratory tests and
performance requirements - Amendment 1: Guidance on the use of structural analysis
for already certified structures (ISO 3471:2008/DAM 1:2026)
Erdbaumaschinen - Überrollschutzaufbauten - Laborprüfungen und
Leistungsanforderungen - Änderung 1: Leitfaden für die Verwendung von
Strukturanalysen für bereits zertifizierte Bauwerke (ISO 3471:2008/DAM 1:2026)
Engins de terrassement - Structures de protection au retournement - Essais de
laboratoire et exigences de performance - Amendement 1: Recommandations relatives à
l'utilisation de l'analyse structurelle pour les structures déjà certifiées (ISO
3471:2008/DAM 1:2026)
Ta slovenski standard je istoveten z: EN ISO 3471:2008/prA1
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
Amendment
ISO 3471:2008/
DAM 1
ISO/TC 127/SC 2
Earth-moving machinery — Roll-
Secretariat: ANSI
over protective structures —
Laboratory tests and performance
Voting begins on:
requirements
2026-05-13
Voting terminates on:
AMENDMENT 1: Guidance on the
2026-08-05
use of structural analysis for already
certified structures
ICS: 53.100
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO 3471:2008/DAM 1:2026(en)
ISO 3471:2008/DAM 1:2026(en)
© ISO 2026
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 3471:2008/DAM 1:2026(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC127, Earth-moving machinery, Subcommittee
SC 2, Safety, ergonomics and general requirements.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iii
ISO 3471:2008/DAM 1:2026(en)
Earth-moving machinery — Roll-over protective structures —
Laboratory tests and performance requirements
AMENDMENT 1: Guidance on the use of structural analysis for
already certified structures
st
5.3 Table 1 – Row 3) 1 column
Replace “10 0000” with “10 000”.
Annex B
Replace the current Annex B with the following New Annex B:
ISO 3471:2008/DAM 1:2026(en)
Annex B
(informative)
Alterations, physical testing, and design changes
B.1 Alterations or repairs
Any ROPS structure which has discernible deformation shall not be reused.
No alterations or repairs to a protective structure shall be permitted except where authorized by the
manufacturer. Structures which have been altered or repaired without proper authorization are not in
compliance with this International Standard.
B.2 Alternatives to physical testing
Theoretical analysis or numerical simulation of a new ROPS d
...



