EN 4700-007:2010

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Stahl und Hochwarmfesten Legierungen - Umgeformte Erzeugnisse - Technische Lieferbedingungen - Teil 007: VormaterialSérie aérospatiale - Aciers et alliages résistant à chaud - Produits corroyés - Spécification technique - Partie 007: Produits pour refusionAerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock49.025.10JeklaSteelsICS:Ta slovenski standard je istoveten z:EN 4700-007:2010SIST EN 4700-007:2011en,de01-maj-2011SIST EN 4700-007:2011SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4700-007
October 2010 ICS 49.025.10 English Version
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock
Série aérospatiale - Aciers et alliages résistant à chaud - Produits corroyés - Spécification technique - Partie 007 : Produits pour refusion
Luft- und Raumfahrt - Stahl und Hochwarmfesten Legierungen - Umgeformte Erzeugnisse - Technische Lieferbedingungen - Teil 007: Vormaterial This European Standard was approved by CEN on 9 January 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4700-007:2010: ESIST EN 4700-007:2011

EN 2002-005, Aerospace series — Test methods for metallic materials — Part 005: Uninterrupted creep and stress-rupture testing
EN 2032-1, Aerospace series — Metallic materials — Part 1: Conventional designation EN 2032-2, Aerospace series — Metallic materials — Part 2: Coding of metallurgical condition in delivery condition EN 2078, Aerospace series — Metallic materials — Manufacturing schedule, inspection schedule, inspection and test report — Definition, general principles, preparation and approval EN 2950, Aerospace series — Test method — Wrought heat resisting alloys — Semi-finished products and parts — Conditions for macrographic and micrographic examination — Atlas of structures and defects EN 2951, Aerospace series — Metallic materials — Test method — Micrographic determination of content of non-metallic inclusions 1) EN 4258, Aerospace series — Metallic materials — General organization of standardization — Links between types of EN standards and their use EN 4259, Aerospace series — Metallic materials — Definition of general terms 1) EN 9100, Quality Management Systems — Requirements for Aviation, Space and Defense Organizations EN 9133, Aerospace series — Quality management systems — Qualification procedure for aerospace standard parts EN 10027-1, Designation systems for steels — Part 1: Steel names EN 10079, Definition of steel products EN ISO 642, Steel — Hardenability test by end quenching (Jominy test) (ISO 642:1999)
1) Published as ASD-STAN Prestandard at the date of publication of this standard by Aerospace and Defence Industries Association of Europe-Standardization (ASD-STAN) (www.asd-stan.org). SIST EN 4700-007:2011

(ISO 6892-1:2009) prEN ISO 6892-2, Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature (ISO/DIS 6892-2:2009) AMS 2315, Determination of Delta Ferrite Content 2) AMS 2750, Pyrometry 2) ASTM A604, Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets 3)
3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 4259 apply. For definitions specific to steel, see EN 10079. 3.1 melt mass of homogeneous liquid metal, the product of one or more furnaces mixed in the same furnace or ladle before pouring 3.2 cast solid metal resulting from the pouring of a single melt 3.3 parent cast cast of remelting stock to be used for the production of casting 3.4 approved scrap scrap used for the production of remelting stock
NOTE 1 It arises from the manufacturer’s own production or from that of the purchaser. Scrap used for the production of castings should be restricted to runners and risers, rejected castings and heavy fettling scrap but should exclude machining chips, turnings or small particles, except those from the manufacturer’s own production.
2) Published by: SAE National (US) Society of Automotive Engineers http://www.sae.org/. 3) Published by: ASTM National (US) American Society for Testing and Materials http://www.astm.org/. SIST EN 4700-007:2011
...