EN 13765:2010/FprA1
(Amendment)Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
Compared to EN 13765:2010 the following changes have been made:
a) in clause 2, normative references have been updated;
b) in Annex H list item e) , the reference to list item b) has been changed to c);
c) in Annex H list item f) , the reference to list item c) has been changed to d);
Thermoplastische, mehrlagige (nicht vulkanisierte) Schläuche und Schlauchleitungen für die Förderung von Kohlenwasserstoffen, Lösungsmitteln und Chemikalien - Spezifikation
Tuyaux et assemblages flexibles thermoplastique multicouches (non vulcanisés) pour le dépotage d'hydrocarbures, solvants et produits chimiques - Spécifications
Plastomerne večslojne (nevulkanizirane) cevi in cevni priključki za pretok ogljikovodikov, topil in kemikalij - Specifikacija
General Information
- Status
- Not Published
- Technical Committee
- CEN/TC 218 - Rubber and plastics hoses and hose assemblies
- Current Stage
- 5060 - Closure of Vote - Formal Approval
- Start Date
- 26-Nov-2014
- Due Date
- 21-May-2015
- Completion Date
- 26-Nov-2014
Relations
- Effective Date
- 18-Jan-2023
- Effective Date
- 28-Jan-2026
- Effective Date
- 11-Sep-2013
Overview
EN 13765:2010/FprA1 is a European standard developed by CEN, focusing on thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies. These hoses are designed specifically for the safe and efficient transfer of hydrocarbons, solvents, and chemicals. The standard outlines specifications aimed at manufacturers, suppliers, and users to ensure consistent quality and performance for hoses used in demanding chemical and industrial applications.
The 2014 draft amendment introduces important updates to normative references and clarifies test and marking requirements, supporting better alignment with the latest international standards and industry practices.
Key Topics
- Normative References: Updates have been made to cited standards, aligning with revised ISO documents, including EN ISO 1043-1:2011 for plastics terminology, EN ISO 10619-1 for hose flexibility and stiffness testing, and ISO 1817:2011 for assessing the effects of liquids on hoses.
- Technical Corrections: Annex H and related table references are clarified, ensuring the correct sequence and citation within the hose testing procedures.
- Product Identification: Specifications for hose marking are updated to reflect the most recent reference standards, improving traceability and compliance.
- Product Performance Testing: The amendment refines test methods for fuel resistance and hydrostatic pressure, ensuring hoses meet stringent performance criteria under real-world operating conditions.
Applications
EN 13765:2010/FprA1 is essential for industries where the safe transfer of hydrocarbons, solvents, and various chemicals is critical. Key areas of application include:
- Petrochemical plants: Ensures hoses used for transferring fuels and chemicals comply with robust safety and quality standards.
- Chemical processing: Provides guidance for hose assemblies handling aggressive or hazardous chemicals.
- Industrial manufacturing: Supports operations where reliable, multi-layer thermoplastic hoses are required for the safe transfer of diverse chemical products.
- Transport and logistics: Applies to hoses used in tanker loading, unloading, and storage applications where chemical resistance and durability are crucial.
By adhering to this standard, organizations reduce product failures, implement best practices for hose testing, and enhance operational safety when moving hazardous substances.
Related Standards
For comprehensive compliance, consider the following related standards:
- EN ISO 1043-1:2011: Plastics - Symbols and abbreviated terms for basic polymers.
- EN ISO 10619-1: Measurement of flexibility and stiffness for rubber and plastics hoses - key for verifying hose performance.
- ISO 1817:2011: Test methods for the impact of liquids on rubber or thermoplastic hoses, crucial for fuel and chemical resistance.
- EN 13766: Covers hoses and hose assemblies for liquefied petroleum gases, complementing the scope of EN 13765.
Practical Value
Compliance with EN 13765:2010/FprA1 ensures:
- Enhanced safety in hazardous chemical transfer operations
- Greater reliability and lifespan of hoses and assemblies
- Increased customer and regulatory confidence in industrial hose products
- Harmonization with the latest international standards, easing trade and operations within the European market
By following the specifications and updates provided in this standard, companies demonstrate a commitment to quality, operational excellence, and regulatory compliance, ultimately safeguarding both workforce and environmental health.
Get Certified
Connect with accredited certification bodies for this standard
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
EN 13765:2010/FprA1 is a draft published by the European Committee for Standardization (CEN). Its full title is "Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification". This standard covers: Compared to EN 13765:2010 the following changes have been made: a) in clause 2, normative references have been updated; b) in Annex H list item e) , the reference to list item b) has been changed to c); c) in Annex H list item f) , the reference to list item c) has been changed to d);
Compared to EN 13765:2010 the following changes have been made: a) in clause 2, normative references have been updated; b) in Annex H list item e) , the reference to list item b) has been changed to c); c) in Annex H list item f) , the reference to list item c) has been changed to d);
EN 13765:2010/FprA1 is classified under the following ICS (International Classification for Standards) categories: 23.040.70 - Hoses and hose assemblies. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13765:2010/FprA1 has the following relationships with other standards: It is inter standard links to EN 13765:2010+A1:2015, EN ISO 19903:2006, EN 13765:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13765:2010/FprA1 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2014
3ODVWRPHUQHYHþVORMQH QHYXONDQL]LUDQH FHYLLQFHYQLSULNOMXþNL]DSUHWRN
RJOMLNRYRGLNRYWRSLOLQNHPLNDOLM6SHFLILNDFLMD
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of
hydrocarbons, solvents and chemicals - Specification
Thermoplastische, mehrlagige (nicht vulkanisierte) Schläuche und Schlauchleitungen für
die Förderung von Kohlenwasserstoffen, Lösungsmitteln und Chemikalien - Spezifikation
Tuyaux et assemblages flexibles thermoplastique multicouches (non vulcanisés) pour le
dépotage d'hydrocarbures, solvants et produits chimiques - Spécifications
Ta slovenski standard je istoveten z: EN 13765:2010/FprA1
ICS:
83.140.40 Gumene cevi Hoses
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
FINAL DRAFT
EN 13765:2010
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
June 2014
ICS 23.040.70
English Version
Thermoplastic multi-layer (non-vulcanized) hoses and hose
assemblies for the transfer of hydrocarbons, solvents and
chemicals - Specification
Tuyaux et assemblages flexibles thermoplastique Thermoplastische, mehrlagige (nicht vulkanisierte)
multicouches (non vulcanisés) pour le dépotage Schläuche und Schlauchleitungen für die Förderung von
d'hydrocarbures, solvants et produits chimiques - Kohlenwasserstoffen, Lösungsmitteln und Chemikalien -
Spécifications Spezifikation
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 218.
This draft amendment A1, if approved, will modify the European Standard EN 13765:2010. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13765:2010/FprA1:2014 E
worldwide f
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...