EN 12312-10:2005
(Main)Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters
Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters
This European Standard specifies the technical requirements to minimise the hazards listed in Clause 4 which can arise during the commissioning, operation and maintenance of container/pallet transfer transporters when carried out in accordance with the specifications given by the manufacturer or the manufacturer authorised representative. It also takes into account some performance requirements recognised as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and handling agencies.
This European Standard applies to self-propelled container/pallet transfer transporters, with a seated driver.
Examples of typical transfer transporters are shown in Annex A.
This European Standard does not apply to:
loading equipment with a height adjustment capability in excess of 150 mm;
transporter-loaders (single platform loader with transporter capability, see EN 12312 9);
roller-bed transport platforms mounted on unmodified commercial road chassis.
This European Standard does not establish requirements for noise and vibration.
Noise and vibration are dealt with respectively in EN 1915 3 and EN 1915 4.
This European Standard is not dealing with hazards in respect to a standard automotive chassis and the traffic on the apron.
This Part of EN 12312 is not applicable to GSE which are manufactured before the date of publication by CEN of this European Standard.
NOTE Certain measurements have been given in imperial units (in parentheses) following the metric measurements since the containers/pallets to be handled are based mainly on the imperial system.
Luftfahrt-Bodengeräte - Besondere Anforderungen - Teil 10: Container-/Paletten-Transfer-Transporter
Diese Europäische Norm enthält Sicherheitsanforderungen für Container-/ Paletten-Transfer-Transporter wie sie unter 3.4 definiert sind. Sie gilt für die verschiedenen selbstfahrenden Bauarten, die unter dem Begriff Container-/ Paletten-Transfer-Transporter zusammengefaßt sind. Beispiele siehe Anhang C. Diese Europäische Norm gilt nicht: - für andere Bauarten von Luftfahrzeug- Ladegeräten oder Container/Paletten-Tranportern; - für Ladegeräte bei denen der Hub der Hebeeinrichtung über das in dieser Norm festgelegte Maß zur Höhenanpassung hinausgeht.
Matériel au sol pour aéronefs - Exigences particulières - Partie 10: Transporteurs de conteneurs et de palettes
La présente norme européenne définit les exigences de sécurité applicables aux transporteurs de conteneurs/palettes tels que définis en 3.4. Elle s'applique à divers types autotractés de transporteurs couramment désignés par le terme de transporteurs de conteneurs/palettes. Voir les exemples de l'Annexe C (informative). La présente norme européenne ne s'applique pas aux: - autres formes de chargeurs d'aéronefs ou transporteurs de conteneurs/palettes; - matériels de chargement d'une capacité de levage supérieure à celle qui est spécifiée dans la présente norme, en ce qui concerne le nivelage uniquement.
Podporna oprema na tleh za letalski promet – Posebne zahteve – 10. del: Naprave za pretovarjanje zabojnikov/palet
General Information
- Status
- Withdrawn
- Publication Date
- 19-Jul-2005
- Withdrawal Date
- 28-Apr-2009
- Technical Committee
- CEN/TC 274 - Aircraft ground support equipment
- Drafting Committee
- CEN/TC 274/SC 2/WG 6 - Container/Pallet transporters
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 29-Apr-2009
- Completion Date
- 29-Apr-2009
- Directive
- 98/37/EC - Machinery
Relations
- Effective Date
- 19-Jan-2023
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
NSF-ISR
NSF International Strategic Registrations.
Orion Registrar Inc.
US-based certification body for management systems.
Sponsored listings
Frequently Asked Questions
EN 12312-10:2005 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters". This standard covers: This European Standard specifies the technical requirements to minimise the hazards listed in Clause 4 which can arise during the commissioning, operation and maintenance of container/pallet transfer transporters when carried out in accordance with the specifications given by the manufacturer or the manufacturer authorised representative. It also takes into account some performance requirements recognised as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and handling agencies. This European Standard applies to self-propelled container/pallet transfer transporters, with a seated driver. Examples of typical transfer transporters are shown in Annex A. This European Standard does not apply to: loading equipment with a height adjustment capability in excess of 150 mm; transporter-loaders (single platform loader with transporter capability, see EN 12312 9); roller-bed transport platforms mounted on unmodified commercial road chassis. This European Standard does not establish requirements for noise and vibration. Noise and vibration are dealt with respectively in EN 1915 3 and EN 1915 4. This European Standard is not dealing with hazards in respect to a standard automotive chassis and the traffic on the apron. This Part of EN 12312 is not applicable to GSE which are manufactured before the date of publication by CEN of this European Standard. NOTE Certain measurements have been given in imperial units (in parentheses) following the metric measurements since the containers/pallets to be handled are based mainly on the imperial system.
This European Standard specifies the technical requirements to minimise the hazards listed in Clause 4 which can arise during the commissioning, operation and maintenance of container/pallet transfer transporters when carried out in accordance with the specifications given by the manufacturer or the manufacturer authorised representative. It also takes into account some performance requirements recognised as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and handling agencies. This European Standard applies to self-propelled container/pallet transfer transporters, with a seated driver. Examples of typical transfer transporters are shown in Annex A. This European Standard does not apply to: loading equipment with a height adjustment capability in excess of 150 mm; transporter-loaders (single platform loader with transporter capability, see EN 12312 9); roller-bed transport platforms mounted on unmodified commercial road chassis. This European Standard does not establish requirements for noise and vibration. Noise and vibration are dealt with respectively in EN 1915 3 and EN 1915 4. This European Standard is not dealing with hazards in respect to a standard automotive chassis and the traffic on the apron. This Part of EN 12312 is not applicable to GSE which are manufactured before the date of publication by CEN of this European Standard. NOTE Certain measurements have been given in imperial units (in parentheses) following the metric measurements since the containers/pallets to be handled are based mainly on the imperial system.
EN 12312-10:2005 is classified under the following ICS (International Classification for Standards) categories: 49.100 - Ground service and maintenance equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12312-10:2005 has the following relationships with other standards: It is inter standard links to EN 12312-10:2005+A1:2009, EN 12312-10:2005/prA1. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12312-10:2005 is associated with the following European legislation: EU Directives/Regulations: 98/37/EC; Standardization Mandates: M/079. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 12312-10:2005 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Podporna oprema na tleh za letalski promet – Posebne zahteve – 10. del: Naprave za pretovarjanje zabojnikov/paletLuftfahrt-Bodengeräte - Besondere Anforderungen - Teil 10: Container-/Paletten-Transfer-TransporterMatériel au sol pour aéronefs - Exigences particulieres - Partie 10: Transporteurs de conteneurs et de palettesAircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters55.180.01Distribucija blaga s prevozom na splošnoFreight distribution of goods in general49.120Oprema za tovorCargo equipmentICS:Ta slovenski standard je istoveten z:EN 12312-10:2005SIST EN 12312-10:2005en01-november-2005SIST EN 12312-10:2005SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12312-10July 2005ICS 49.100English versionAircraft ground support equipment - Specific requirements - Part10: Container/Pallet transfer transportersMatériel au sol pour aéronefs - Exigences particulières -Partie 10 : Transporteurs de conteneurs et de palettesLuftfahrt-Bodengeräte - Besondere Anforderungen - Teil10: Container-/Paletten-Transfer-TransporterThis European Standard was approved by CEN on 13 June 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12312-10:2005: ESIST EN 12312-10:2005
Examples of different transporters.11 Annex B (normative)
List of hazards in addition to those of EN 1915-1.13 Annex C (informative)
Functional requirements for conveying systems on platforms.14 Annex D (informative)
Typical data for unit load devices.16 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC.18 Bibliography.19
1 Scope This European Standard specifies the technical requirements to minimise the hazards listed in Clause 4 which can arise during the commissioning, operation and maintenance of container/pallet transfer transporters when carried out in accordance with the specifications given by the manufacturer or his authorised representative. It also takes into account some performance requirements recognised as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and handling agencies. This European Standard applies to self-propelled container/pallet transfer transporters, with a seated driver. Examples of typical transfer transporters are shown in Annex A. This European Standard does not apply to: loading equipment with a height adjustment capability in excess of 150 mm; transporter-loaders (single platform loader with transporter capability, see EN 12312-9); roller-bed transport platforms mounted on unmodified commercial road chassis. This European Standard does not establish requirements for noise and vibration. Noise and vibration are dealt with respectively in EN 1915-4 and EN 1915-3. This European Standard is not dealing with hazards in respect to a standard automotive chassis and the traffic on the apron. This Part of EN 12312 is not applicable to GSE which are manufactured before the date of publication by CEN of this European Standard. NOTE Certain measurements have been given in imperial units (in parentheses) following the metric measurements since the containers/pallets to be handled are based mainly on the imperial system. SIST EN 12312-10:2005
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...