EN 10056-1:1998
(Main)Structural steel equal and unequal leg angles - Part 1: Dimensions
Structural steel equal and unequal leg angles - Part 1: Dimensions
This Part of this European Standard specifies requirements for the nominal dimensions of hot-rolled equal and unequal leg angles. This European Standard does not apply to angles with square roots. These requirements do not apply to equal and unequal leg angles rolled from stainless steel. Tolerances for equal and unequal leg angles are given in EN 10056-2.
Gleichschenklige und ungleichschenklige Winkel aus Stahl - Teil 1: Maße
Dieser Teil der Europäischen Norm legt die Anforderungen an die Nennmaße von warmgewalzten gleichschenkligen und ungleichschenkligen Winkeln fest. Diese Europäische Norm gilt nicht für scharfkantige Winkel. diese Europäische Norm gilt nicht für gewalzte gleichschenklige und ungleichschenklige Winkel aus nichtrostenden Stählen. Die Grenzabmaße und Formtoleranzen von gleichschenkligen und ungleichschenkligen Winkel sind in EN 10056-2 enthalten.
Cornières à ailes égales et inégales en acier de construction - Partie 1: Dimensions
La présente partie de cette norme européenne spécifie les prescriptions relatives aux dimensions nominales des cornières laminées à chaud à ailes égales et à ailes inégales. La présente norme européenne ne s'applique pas aux cornières présentant un raccordement des ailes à angle vif. Ces prescriptions ne s'appliquent pas aux cornières à ailes égales et à ailes inégales laminées en acier inoxydable. Les tolérances des cornières à ailes égales et à ailes inégales sont données dans l'EN 10056-2.
Kotni (L) jekleni profili z enakimi in različnimi kraki - 1. del: Mere
General Information
- Status
- Withdrawn
- Publication Date
- 18-Aug-1998
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- ECISS/TC 103 - Structural steels other than reinforcements
- Drafting Committee
- ECISS/TC 11 - Structural steel sections
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 18-Jan-2017
- Completion Date
- 21-Jan-2026
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 06-Feb-2013
- Effective Date
- 28-Jan-2026
Frequently Asked Questions
EN 10056-1:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Structural steel equal and unequal leg angles - Part 1: Dimensions". This standard covers: This Part of this European Standard specifies requirements for the nominal dimensions of hot-rolled equal and unequal leg angles. This European Standard does not apply to angles with square roots. These requirements do not apply to equal and unequal leg angles rolled from stainless steel. Tolerances for equal and unequal leg angles are given in EN 10056-2.
This Part of this European Standard specifies requirements for the nominal dimensions of hot-rolled equal and unequal leg angles. This European Standard does not apply to angles with square roots. These requirements do not apply to equal and unequal leg angles rolled from stainless steel. Tolerances for equal and unequal leg angles are given in EN 10056-2.
EN 10056-1:1998 is classified under the following ICS (International Classification for Standards) categories: 77.140.70 - Steel profiles. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10056-1:1998 has the following relationships with other standards: It is inter standard links to EN 10056-1:2017, EN 10079:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10056-1:1998 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10056-1:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gleichschenklige und ungleichschenklige Winkel aus Stahl - Teil 1: MaßeCornieres a ailes égales et inégales en acier de construction - Partie 1: DimensionsStructural steel equal and unequal leg angles - Part 1: Dimensions77.140.70Jekleni profiliSteel profilesICS:Ta slovenski standard je istoveten z:EN 10056
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...