Abstract

This document specifies the minimum requirements for environmental testing of electronic and electrical components identified as safety-related parts of the control system (SRP/CS) used on earth-moving machinery as defined in ISO 6165:2022.
To cover all the relevant safety requirements for the products in its scope, this document is used in combination with ISO 19014-1:2026, ISO 19014-2:2026, ISO 19014-4:2026, and ISO 19014-5:2026.
This document does not address explosion proofing.
NOTE            National or regional requirements can apply. For information about explosion proofing, see the IEC 60079 series.

Status
Not Published
Publication Date
01-Dec-2026
Current Stage
6055 - CEN Ratification completed (DOR) - Publishing
Start Date
22-Sep-2026
Completion Date
22-Sep-2026

Buy Documents

Draft

prEN ISO 19014-3:2024

English language (17 pages)
Preview
Preview
e-Library read for
×1 day

EN ISO 19014-3:2026 is a CEN/ISO standard for earth-moving machinery functional safety. It specifies the minimum environmental test requirements for electronic and electrical components identified as safety-related parts of the control system (SRP/CS) on earth-moving machinery (EMM). It is used together with the other parts of the ISO 19014 series to judge whether these components are suitable for their intended operating environment.

What does EN ISO 19014-3:2026 specify?

EN ISO 19014-3:2026 applies to EMM as defined in ISO 6165 and to attachments. It sets minimum environmental testing requirements for electronic and electrical components used as SRP/CS, and it does not address explosion proofing.

The document is organized into Scope, Normative references, Terms and definitions, Information for use, Functional status classifications, Tests and requirements, and an informative Annex A test checklist. Clause 5 defines the functional status classes used to judge test behavior, and Clause 6 contains the test methods and acceptance behavior.

What are the key requirements of EN ISO 19014-3:2026?

EN ISO 19014-3:2026 requires the EMM manufacturer to select test conditions that match the real mounting location and use environment. That matters because the same component can face very different conditions in an engine compartment, operator station, or chassis.

  • Information for use - Clause 4 requires limits of machine use, notable assumptions, and examples of machine abuse to be communicated according to ISO 19014-2 and ISO 12100. In practice, the supplier and user need clear operating limits before the machine is put into service.
  • Functional status classes - Clause 5 defines Classes A to E for how the device under test (DUT) behaves during and after a test. This gives a common way to decide whether temporary disturbance, reset, or repair is acceptable.
  • Dust protection - Clause 6.2 verifies resistance to dust intrusion. Components meeting at least IP6X under IEC 60529 or IPX6K under ISO 20653 may be exempt, which helps avoid unnecessary testing for already sealed designs.
  • Chemical, salt and wash exposure - Clauses 6.3 to 6.5 cover chemical resistance, salt spray, and pressure wash. The manufacturer must consider actual exposure and may use documentary evidence to justify not testing materials proven immune to a contaminant.
  • Mechanical robustness - Clauses 6.6 and 6.7 cover random vibration and operating shock. For vibration, the standard points to Figure 1 and Table 1 when site data are unavailable; for shock, the DUT is powered and monitored.
  • Temperature and humidity stress - Clauses 6.8 to 6.10 cover temperature cycles, thermal shock, and humidity cycles. These tests check whether the DUT keeps working across daily and seasonal swings and whether moisture causes leakage or breathing effects.
  • Electrical disturbances - Clauses 6.11, 6.12, 6.13, and 6.14 cover overvoltage, undervoltage reset behavior, electromagnetic compatibility (EMC), and reverse polarity. These are the common electrical faults seen on mobile equipment, especially during starting, charging, and auxiliary starts.

What terms does EN ISO 19014-3:2026 define?

EN ISO 19014-3:2026 uses a small set of core terms to keep testing and reporting consistent.

  • Life cycle - the time between commissioning and decommissioning of a component.
  • Device under test (DUT) - the component being evaluated in the test.
  • Safety-related parts of the control system (SRP/CS) - the parts of the control system that are relevant to safety.
  • Earth-moving machinery (EMM) - the machine family covered by ISO 6165.
  • Class A - all safety functions perform as designed during and after the test.
  • Class B - functions perform during the test, may move outside tolerance during the test, and return automatically afterward.
  • Class D - functions do not perform as designed during the test and only return after reset.
  • Class E - functions do not return to normal without repair or replacement.

Who uses EN ISO 19014-3:2026?

EN ISO 19014-3:2026 is used by machine manufacturers, component manufacturers, and test laboratories working on earth-moving machinery. It helps them define the test plan, select the right environmental tests, and record pass or fail behavior for safety-related electronic and electrical components.

It is also relevant to health and safety bodies, market surveillance, and maintenance or service organizations. In practice, they use it to check that the equipment was assessed against the expected environment and that the test evidence matches the machine’s installation and use.

What changed in EN ISO 19014-3:2026 from the previous edition?

EN ISO 19014-3:2026 replaces ISO 15998 and is described as a technical revision. The changes listed for this edition are:

  • referenced standards are dated;
  • information for use was added;
  • a new functional status, Class E, was added;
  • the typo “IPXK6” was corrected to “IPX6K”;
  • minor editorial improvements were made.

Which standards are used with EN ISO 19014-3:2026?

StandardWhat it contributes
ISO 6165Basic types and terms for EMM
ISO 19014-1Risk assessment method for control system performance requirements
ISO 19014-2Design and evaluation of safety-related machine control systems; also referenced for information for use
ISO 19014-4Software and transmission for safety-related parts of the control system
ISO 19014-5Tables of performance levels
ISO 13766-1General EMC requirements for machines with internal electrical power supply
ISO 13766-2Additional EMC requirements for functional safety
ISO 16750-2Electrical loads for overvoltage, undervoltage, and reverse polarity testing
ISO 16750-5Chemical loads for chemical resistance testing
ISO 20653IP code for dust and water protection
IEC 60529IP code for enclosure protection against foreign objects and water
IEC 60068-2-11Salt mist test method
IEC 60068-2-14Temperature change testing
IEC 60068-2-27Shock testing
IEC 60068-2-38Temperature/humidity cyclic testing
IEC 60068-2-52Cyclic salt mist testing
IEC 60068-2-64Broadband random vibration testing
ISO 12100General principles for design and risk reduction, cited for information for use

What does the EN ISO 19014-3:2026 document contain?

EN ISO 19014-3:2026 contains the test logic for environmental verification, not just a list of conditions. It includes functional status classes, purpose statements for each test, and the corresponding test methods or external standards to use.

The document also includes Figure 1 and Table 1 for random vibration severity, and Figure 2 for the temperature-cycle profile. Annex A provides an informative test checklist that the manufacturer can use to record which tests were performed and why any test was excluded.

Relations

Effective Date
12-Feb-2026
Effective Date
13-Dec-2023

Buy Documents

Draft

prEN ISO 19014-3:2024

English language (17 pages)
Preview
Preview
e-Library read for
×1 day

Frequently Asked Questions

EN ISO 19014-3:2026 is a draft published by the European Committee for Standardization (CEN). Its full title is "Earth-moving machinery - Functional safety - Part 3: Environmental performance and test requirements of electronic and electrical components used in safety-related parts of the control system (ISO 19014-3:2026)". This standard covers: This document specifies the minimum requirements for environmental testing of electronic and electrical components identified as safety-related parts of the control system (SRP/CS) used on earth-moving machinery as defined in ISO 6165:2022. To cover all the relevant safety requirements for the products in its scope, this document is used in combination with ISO 19014-1:2026, ISO 19014-2:2026, ISO 19014-4:2026, and ISO 19014-5:2026. This document does not address explosion proofing. NOTE            National or regional requirements can apply. For information about explosion proofing, see the IEC 60079 series.

This document specifies the minimum requirements for environmental testing of electronic and electrical components identified as safety-related parts of the control system (SRP/CS) used on earth-moving machinery as defined in ISO 6165:2022. To cover all the relevant safety requirements for the products in its scope, this document is used in combination with ISO 19014-1:2026, ISO 19014-2:2026, ISO 19014-4:2026, and ISO 19014-5:2026. This document does not address explosion proofing. NOTE            National or regional requirements can apply. For information about explosion proofing, see the IEC 60079 series.

EN ISO 19014-3:2026 is classified under the following ICS (International Classification for Standards) categories: 53.100 - Earth-moving machinery. The ICS classification helps identify the subject area and facilitates finding related standards.

EN ISO 19014-3:2026 has the following relationships with other standards: It is inter standard links to ISO 19014-3:2026, EN ISO 19014-3:2018. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN ISO 19014-3:2026 is associated with the following European legislation: EU Directives/Regulations: 2023/1230; Standardization Mandates: M/605. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN ISO 19014-3:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
oSIST prEN ISO 19014-3:2024
01-november-2024
Stroji za zemeljska dela - Funkcijska varnost - 3. del: Okoljske in preskusne
zahteve za elektronske in električne komponente, uporabljene v delih krmilnega
sistema, ki so povezani z varnostjo (ISO/DIS 19014-3:2024)
Earth-moving machinery - Functional safety - Part 3: Environmental performance and
test requirements of electronic and electrical components used in safety-related parts of
the control system (ISO/DIS 19014-3:2024)
Erdbaumaschinen - Funktionale Sicherheit - Teil 3: Umweltanforderungen und
Prüfungsanforderungen von elektronischen und elektrischen Komponenten des
sicherheitsrelevanten Steuerungssystems (ISO/DIS 19014-3:2024)
Engins de terrassement - Sécurité fonctionnelle - Partie 3: Exigences pour la
performance environnementale et l'essai des composants électroniques et électriques
utilisés dans les parties relatives à la sécurité du système de commande (ISO/DIS 19014
-3:2024)
Ta slovenski standard je istoveten z: prEN ISO 19014-3
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
oSIST prEN ISO 19014-3:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN ISO 19014-3:2024
oSIST prEN ISO 19014-3:2024
DRAFT
International
Standard
ISO/DIS 19014-3
ISO/TC 127/SC 2
Earth-moving machinery —
Secretariat: ANSI
Functional safety —
Voting begins on:
Part 3: 2024-08-29
Environmental performance and
Voting terminates on:
2024-11-21
test requirements of electronic
and electrical components used in
safety-related parts of the control
system
Engins de terrassement — Sécurité fonctionnelle —
Partie 3: Exigences pour la performance environnementale et
l'essai des composants électroniques et électriques utilisés dans
les parties relatives à la sécurité du système de commande
ICS: 53.100
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 19014-3:2024(en)
oSIST prEN ISO 19014-3:2024
DRAFT
ISO/DIS 19014-3:2024(en)
International
Standard
ISO/DIS 19014-3
ISO/TC 127/SC 2
Earth-moving machinery —
Secretariat: ANSI
Functional safety —
Voting begins on:
Part 3:
Environmental performance and
Voting terminates on:
test requirements of electronic and
electrical components used in safety-
related parts of the control system
Engins de terrassement — Sécurité fonctionnelle —
Partie 3: Exigences pour la performance environnementale et
l'essai des composants électroniques et électriques utilisés dans
les parties relatives à la sécurité du système de commande
ICS: 53.100
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
This document is circulated as received from the committee secretariat. BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 19014-3:2024(en)
ii
oSIST prEN ISO 19014-3:2024
ISO/DIS 19014-3:2024(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Information for use . 2
5 Functional status classifications . 2
5.1 Class A .2
5.2 Class B .2
5.3 Class C .2
5.4 Class D .2
5.5 Class E . .2
6 Tests and requirements . 3
6.1 General .3
6.2 Dust . .3
6.2.1 Purpose .3
6.2.2 Test method .3
6.3 Chemical resistance .3
6.3.1 Purpose .3
6.3.2 Test method .4
6.4 Salt spray .4
6.4.1 Purpose .4
6.4.2 Test method .4
6.5 Pressure wash .4
6.5.1 Purpose .4
6.5.2 Test method .4
6.6 Random vibration .4
6.6.1 Purpose .4
6.6.2 Test method .5
6.7 Operating shock .6
6.7.1 Purpose .6
6.7.2 Test method .6
6.8 Temperature cycles .6
6.8.1 Purpose .6
6.8.2 Test method .6
6.9 Thermal shock.7
6.9.1 Purpose .7
6.9.2 Test method .7
6.10 Humidity cycles .7
6.10.1 Purpose .7
6.10.2 Test method .8
6.11 Overvoltage condition .8
6.11.1 Purpose .8
6.11.2 Test method .8
6.12 Undervoltage condition (reset behaviour at voltage drop) .8
6.12.1 Purpose .8
6.12.2 Test method .8
6.13 Electromagnetic compatibility.8
6.13.1 Purpose .8
6.13.2 Test method .8
6.14 Reverse polarity .8
6.14.1 Purpose .8
6.14.2 Test method .9

iii
oSIST prEN ISO 19014-3:2024
ISO/DIS 19014-3:2024(en)
Annex A (informative) Test checklist . 10
Bibliography .11

iv
oSIST prEN ISO 19014-3:2024
ISO/DIS 19014-3:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent
rights identified during the development of the document will be in the Introduction and/or on the ISO list of
patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 127, Earth-moving machinery, Subcommittee
SC 2, Safety, ergonomics and general requirements.
This first edition of ISO 19014-3, together with ISO 19014-1, ISO 19014-2, ISO 19014-4 and ISO/ TS 19014-5,
cancels and replaces ISO 15998, which has been technically revised.
The main changes compared to the previous document are as follows:
— Referenced standards have been dated;
— Information for use added;
— Additional functional status “Class E” added;
— Typographical error corrected, “IPXK6” changed to “IPX6K”;
— Minor editorial improvements.
A list of all parts in the ISO 19014-series can be found on the ISO website. At the time of publication of
this document, Part 2, Design and evaluation of safety-related machine control systems, Part 4, Design and
evaluation of software and transmission for safety related parts of the control system, and Part 5, Tables of
performance levels, are under development.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

v
oSIST prEN ISO 19014-3:2024
ISO/DIS 19014-3:2024(en)
Introduction
This document addresses electronic and electrical systems used for functional safety in earth-moving
machinery.
The structure of safety standards in the field of machinery is as follows.
Type-A standards (basis standards) give basic concepts, principles for design and general aspects that can
be applied to machinery.
Type-B standards (generic safety standards) deal with one or more safety aspects, or one or more types of
safeguards that can be used across a wide range of machinery:
— type-B1 standards on particular safety aspects (e.g. safety distances, surface temperature, noise);
— type-B2 standards on safeguards (e.g. two-hands controls, interlocking devices, pressure sensitive
devices, guards).
Type-C standards (machinery safety standards) deal with detailed safety requirements for a particular
machine or group of machines.
This document, when taken together with the other parts of ISO 19014, is a type-C standard as stated in
ISO 12100.
...