EN 4500-001:2012

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VWDYOMDQMHLuft- und Raumfahrt - Metallische Werkstoffe - Regeln für das Erstellen und die Gestaltung von Werkstoffnormen - Teil 001: Allgemeine RegelnSérie aérospatiale - Matériaux métalliques - Règles pour la rédaction et la présentation des normes de matériaux - Partie 001: Règles généralesAerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules49.025.15Neželezove zlitine na splošnoNon-ferrous alloys in general49.025.05Železove zlitine na splošnoFerrous alloys in generalICS:Ta slovenski standard je istoveten z:EN 4500-001:2012SIST EN 4500-001:2014en01-marec-2014SIST EN 4500-001:2014SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4500-001
October 2012 ICS 49.025.05; 49.025.15 English Version
Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules
Série aérospatiale - Matériaux métalliques - Règles pour la rédaction et la présentation des normes de matériaux - Partie 001: Règles générales
Luft- und Raumfahrt - Metallische Werkstoffe - Regeln für das Erstellen und die Gestaltung von Werkstoffnormen - Teil 001: Allgemeine Regeln This European Standard was approved by CEN on 23 June 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4500-001:2012: ESIST EN 4500-001:2014

..................................................................... 23 SIST EN 4500-001:2014

EN 4258, Aerospace series — Metallic materials — General organization of standardization — Links between types of EN standards and their use EN 4259, Aerospace series — Metallic materials — Definition of general terms 1)
1) Published as ASD-STAN Prestandard at the date of publication of this standard (www.asd-stan.org). SIST EN 4500-001:2014

EN 4500-003, Aerospace series — Metallic materials — Rules for drafting and presentation of material standards — Part 003: Specific rules for heat resisting alloys
EN 4500-004, Aerospace series — Metallic materials — Rules for drafting and presentation of material standards — Part 004: Specific rules for titanium and titanium alloys
express Vmin. and Vmax. in "p.p.m.";  Vmin. > 0,01 % express in %. The number of decimal places written shall be consistent with the accuracy required. The base metal shall be indicated in the last column of the second line of boxes by means of a minimum and/or maximum value or by the expression "base". The standard order for presentation of the elements for each family of metallic materials is specified in EN 4500-2 to EN 4500-6. 4.5.4 Page 4, line 3: Method of melting Line 3 shall be completed when one or several specific methods of melting are required. Modification to line 3 (by addition of further melting methods or changes to melting methods) shall not change the EN reference number if the requirements defined in lines 12 to 99 do not change. When several methods of melting can be used under the same EN reference (i.e. the requirements in the lines 12 to 99 do not change), line 3 shall contain a note which will state in line 98 ; "the melting route for qualification and delivery of products shall be identical". 4.5.5 Page 4, line 4.1: Form The form or similar forms of the products covered by the standard shall be stated using the same terms as specified in the title. 4.5.6 Page 4, line 4.2: Method of production The method or methods of production shall be indicated, if necessary. In the case of castings or forgings, indicate requirements for remelting stock or forging stock as follows:  cast from remelting stock EN XXXX; or  forged from forging stock EN XXXX. SIST EN 4500-001:2014

4.5.10 Page 4, line 6.2: Delivery condition code Write the relevant code lette
...