EN 3747:2003
(Main)Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification
Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification
This standard specifies the characteristics, qualification and acceptance requirements for O-rings in fluorosilicone rubber FVMQ to EN 3825, EN 3826 and EN 3827.
Luft- und Raumfahrt - O-Ringe aus Fluorsilicon-Elastomer (FVMQ) - Technische Lieferbedingungen
Diese Norm legt die Eigenschaften, Qualifikations und Abnahmebedingungen für O Ringe aus Fluorsilicon- Elastomer (FVMQ) nach EN 3825, EN 3826 und EN 3827 fest.
Joints toriques en élastomère fluorosilicone - Spécification technique
Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification
General Information
- Status
- Withdrawn
- Publication Date
- 14-Jan-2003
- Withdrawal Date
- 19-Jun-2007
- Technical Committee
- ASD/MECH - Mechanical
- Drafting Committee
- ASD/MECH - Mechanical
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 20-Jun-2007
- Completion Date
- 20-Jun-2007
Relations
- Replaced By
EN 3747:2007 - Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification - Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
NSF-ISR
NSF International Strategic Registrations.
Orion Registrar Inc.
US-based certification body for management systems.
Sponsored listings
Frequently Asked Questions
EN 3747:2003 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification". This standard covers: This standard specifies the characteristics, qualification and acceptance requirements for O-rings in fluorosilicone rubber FVMQ to EN 3825, EN 3826 and EN 3827.
This standard specifies the characteristics, qualification and acceptance requirements for O-rings in fluorosilicone rubber FVMQ to EN 3825, EN 3826 and EN 3827.
EN 3747:2003 is classified under the following ICS (International Classification for Standards) categories: 49.025.40 - Rubber and plastics. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 3747:2003 has the following relationships with other standards: It is inter standard links to EN 3747:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 3747:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specificationLuft- und Raumfahrt - O-Ringe aus Fluorsilicon-Elastomer (FVMQ) - Technische LieferbedingungenJoints toriques en élastomere fluorosilicone - Spécification techniqueAerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification49.025.40Guma in polimerni materialiRubber and plasticsICS:Ta slovenski standard je istoveten z:EN 3747:2003SIST EN 3747:2004en01-maj-2004SIST EN 3747:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3747January 2003ICS 49.025.40English versionAerospace series - O-rings, in fluorosilicone rubber (FVMQ) -Technical specificationThis European Standard was approved by CEN on 2 June 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3747:2003 ESIST EN 3747:2004
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...