FprEN 15767-3

SLOVENSKI STANDARD
oSIST prEN 15767-3:2025
01-september-2025
Prenosna oprema za črpanje in uporabo gasilnega sredstva in podporne gasilske
operacije - Prenosni monitorji - 3. del: Gasilno sredstvo - pena
Portable equipment for projecting extinguishing agents and firefighting support
operations - Portable monitors - Part 3: Foam devices
Tragbare Geräte zum Ausbringen von Löschmitteln und zur Unterstützung der
Brandbekämpfung - Tragbare Wasserwerfer - Teil 3: Schaumdüsen
Equipement portable pour la projection d'agents d'extinction et les opérations de soutien
à la lutte contre les incendies - Lances-canon portables - Partie 3: Dispositifs pour la
mousse
Ta slovenski standard je istoveten z: prEN 15767-3
ICS:
13.220.10 Gašenje požara Fire-fighting
oSIST prEN 15767-3:2025 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 15767-3:2025
oSIST prEN 15767-3:2025
DRAFT
EUROPEAN STANDARD
prEN 15767-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2025
ICS 13.220.10 Will supersede EN 15767-3:2010
English Version
Portable equipment for projecting extinguishing agents
and firefighting support operations - Portable monitors -
Part 3: Foam devices
Equipement portable pour la projection d'agents Tragbare Geräte zum Ausbringen von Löschmitteln
d'extinction et les opérations de soutien à la lutte und zur Unterstützung der Brandbekämpfung -
contre les incendies - Lances--canon portables - Partie Tragbare Wasserwerfer - Teil 3: Schaumdüsen
3: Dispositifs pour la mousse
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 192.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15767-3:2025 E
worldwide for CEN national Members.

oSIST prEN 15767-3:2025
prEN 15767-3:2025 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements and verification . 6
4.1 General . 6
4.2 Mechanical characteristics . 6
4.2.1 Mass . 6
4.2.2 Operating and handling elements . 7
4.2.3 Flow adjustment positions . 7
4.2.4 Jet adjustment positions . 7
4.3 Materials . 7
4.4 Hydraulic characteristics . 8
4.4.1 Pressures . 8
4.4.2 Flowrates . 8
4.4.3 Effective throw . 8
4.4.4 Spray jet . 10
4.4.5 Sensitivity to heat . 10
4.4.6 Sensitivity to frost . 10
5 Information for use . 11
5.1 Instruction and maintenance handbook . 11
5.1.1 General . 11
5.1.2 Instruction handbook . 11
5.1.3 Maintenance handbook . 11
5.2 Marking . 11
Annex A (informative) Acceptance test on delivery . 12
Annex B (normative) Datasheet for foam devices . 13
Annex C (informative) Example of completed datasheet for water nozzles . 16
Bibliography . 19

oSIST prEN 15767-3:2025
prEN 16767-3:2025 (E)
European foreword
This document (prEN 15767-3:2025) has been prepared by Technical Committee CEN/TC 192 “Fire
service equipment”, the secretariat of which is held by BSI.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 15767-3:2010.
prEN 15767-3:2024 includes the following significant changes with respect to EN 15767-3:2010:
— the title has been amended;
— definition of “foam nozzle” has been added (see 3.3.1);
— “foam cannon” has been replaced with “foam tube” (see 3.3.2);
— maximum flow Q , has been deleted;
max
— according to current rules for drafting standard, notes containing the words “should” and “may” have
been transformed into normative text;
— all general requirements have been placed in a new 4.1 “General”;
— information about the viscosity of the foam concentrate shall be given (see 4.1 and 5.1.2);
— each verification has been placed under the corresponding requirement (see Clause 4);
— water nozzles shall be ergonomically designed (see 4.1 – should replaced by shall);
— missing requirements have been added in 4.4.5 and 4.4.6;
— missing verification have been added in 4.2.1, 4.2.2, 4.2.3, 4.2.4 and 4.3;
— Table 1 “Maximum mass” has been amended;
— informative Annex A on “Effects of the foam concentrate on the performance of the foam devices” has
been deleted;
— improvement of the wording/editorial changes.
oSIST prEN 15767-3:2025
prEN 15767-3:2025 (E)
1 Scope
In addition to the requirements given in EN 15767-1, this document applies to devices designed for
aspirating air and projecting low expansion foam and, in some cases, inducting foam concentrate. It
specifies requirements for safety, performance, classification and designation, as well as test methods,
instructions for use and maintenance and marking.
This document is not applicable to water nozzles that are manufactured before its date of publication.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
1 )
EN 15767-1, , Portable equipment for projecting extinguishing agents and firefighting support
operations — Portable monitors — Part 1: General requirements for portable monitor assemblies
3 Terms and definitions
For the purposes of this document, the definitions given in EN 15767-1 and the following apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp/
— IEC Electropedia: available at https://www.electropedia.org/
3.1
foam concentrate
liquid which is diluted with water to produce foam solution
[EN 1568-1:2018, 3.7 without the note]
3.2
foam solution
solution of foam concentrate in water
[EN 1568-1:2018, 3.8]
3.3
foam device
device designed for aspirating air and projecting foam and, in some cases, inducting foam concentrate
Note 1 to entry: Several types of foam devices are described from 3.3.1 to 3.3.3.
3.3.1
foam nozzle
water nozzle with or without inducing system that transforms the foam solution pressure into velocity
to produce a coherent stream of firefighting foam
Note 1 to entry: Water nozzle is defined in EN 15767-2.

Under revision.
oSIST prEN 15767-3:2025
prEN 16767-3:2025 (E)
3.3.2
foam tube
device that transforms the foam solution pressure into velocity and mixes air with the foam solution to
produce a coherent stream of firefighting foam in a tube
3.3.3
self-inducting nozzle
water nozzle equipped with a self-inducting system
Note 1 to entry: Water nozzle is defined in EN 15767-2.
3.3.4
foam attachment
device fitted to a water nozzle or a self-inducting nozzle that mixes air with the foam solution to produce
firefighting foam
3.4
pick-up tube
non collapsible tube for transferring the foam concentrate to the inducting system
3.5
inducting system
device for mixing foam concentrate with water at a set rate
3.6
self-inducting system
inducting system integrated into a foam device
3.7
spreader
device to modify the shape of the foam stream into a flat spray
3.8
induction rate
ratio of foam concentrate to the foam solution
3.9
metering device
device controlling the induction rate
3.10
expansion
expansion value
expansion ratio
ratio of the volume of foam to the volume of the foam solution from which it was made
[SOURCE: EN 1568-1:2018, 3.2]
3.11
low expansion foam
foam which has an expansion ratio less than 20
[SOURCE: EN 1568-1:2018, 3.3]
oSIST prEN 15767-3:2025
pr
...