EN 580:2003
(Main)Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT)
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT)
This standard specifies a method for determining the resistance of unplasticized poly(vinyl chloride) (PVC-U) pipes to dichloromethane at a specified temperature (DCMT).
This standard is applicable to PVC-U pipes, irrespective of their use.
The method can be used as a rapid means of quality control during manufacture.
NOTE The temperature of the dichloromethane at which PVC-U shall not be attacked, is specified in the referring standard.
Kunststoff-Rohrleitungssysteme - Rohre aus weichmacherfreiem Polyvinylchlorid (PVC-U) - Prüfverfahren für die Beständigkeit gegen Dichlormethan bei einer festgelegten Temperatur (DCMT)
Systèmes de canalisations en plastiques - Tubes en poly(chlorure de vinyl) non-plastifié - Méthode d'essai de la résistance au dichlorométhane à une température spécifiée (DCMT)
La présente norme spécifie une méthode de détermination de la résistance des canalisations en poly(chlorure de vinyle) non plastifié (PVC-U) au dichlorométhane à une température spécifiée (DCMT).
Cette norme est applicable aux canalisations en PVC non plastifié, quelle que soit leur utilisation.
La méthode peut être utilisée comme un moyen rapide de contrôle de qualité pendant la production.
NOTE La température du dichlorométhane à laquelle le PVC-U ne doit pas être attaqué, est spécifiée dans la norme de référence.
Cevni sistemi iz polimernih materialov -Cevi iz nemehčanega polivinilklorida (PVC-U) - Preskusna metoda za odpornost proti diklormetanu pri določeni temperaturi (DCMT)
General Information
- Status
- Withdrawn
- Publication Date
- 22-Apr-2003
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 155 - Plastics piping systems and ducting systems
- Drafting Committee
- CEN/TC 155 - Plastics piping systems and ducting systems
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 18-Oct-2017
- Completion Date
- 21-Jan-2026
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 25-Oct-2017
Frequently Asked Questions
EN 580:2003 is a standard published by the European Committee for Standardization (CEN). Its full title is "Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT)". This standard covers: This standard specifies a method for determining the resistance of unplasticized poly(vinyl chloride) (PVC-U) pipes to dichloromethane at a specified temperature (DCMT). This standard is applicable to PVC-U pipes, irrespective of their use. The method can be used as a rapid means of quality control during manufacture. NOTE The temperature of the dichloromethane at which PVC-U shall not be attacked, is specified in the referring standard.
This standard specifies a method for determining the resistance of unplasticized poly(vinyl chloride) (PVC-U) pipes to dichloromethane at a specified temperature (DCMT). This standard is applicable to PVC-U pipes, irrespective of their use. The method can be used as a rapid means of quality control during manufacture. NOTE The temperature of the dichloromethane at which PVC-U shall not be attacked, is specified in the referring standard.
EN 580:2003 is classified under the following ICS (International Classification for Standards) categories: 23.040.20 - Plastics pipes. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 580:2003 has the following relationships with other standards: It is inter standard links to EN 580:1993, EN ISO 9852:2017. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 580:2003 is associated with the following European legislation: EU Directives/Regulations: 93/38/EEC; Standardization Mandates: M/BC/CEN/88/15. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 580:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.'&07Kunststoff-Rohrleitungssysteme - Rohre aus weichmacherfreiem Polyvinylchlorid (PVC-U) - Prüfverfahren für die Beständigkeit gegen Dichlormethan bei einer festgelegten Temperatur (DCMT)Systemes de canalisations en plastiques - Tubes en poly(chlorure de vinyl) non-plastifié - Méthode d'essai de la résistance au dichlorométhane a une température spécifiée (DCMT)Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT)23.040.20Cevi iz polimernih materialovPlastics pipesICS:Ta slovenski standard je istoveten z:EN 580:2003SIST EN 580:2003en01-oktober-2003SIST EN 580:2003SLOVENSKI
STANDARDSIST EN 580:19971DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 580April 2003ICS 23.040.20Supersedes EN 580:1993English versionPlastics piping systems - Unplasticized poly(vinyl chloride)(PVC-U) pipes - Test method for the resistance todichloromethane at a specified temperature (DCMT)Systèmes de canalisations en plastiques - Tubes enpoly(chlorure de vinyl) non-plastifié - Méthode d'essai de larésistance au dichlorométhane à une température spécifiée(DCMT)Kunststoff-Rohrleitungssysteme - Rohre ausweichmacherfreiem Polyvinylchlorid (PVC-U) -Prüfverfahren für die Beständigkeit gegen Dichlormethanbei einer festgelegten Temperatur (DCMT)This European Standard was approved by CEN on 14 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 580:2003 ESIST EN 580:2003
Description of attack.8Annex B (informative)
Example of small vessel build into existing vessel.9SIST EN 580:2003
± 1) min in dichloromethane at a specified temperature to verify that the PVC-U is not attacked atthat temperature. The surface area of the dichloromethane is minimized and covered by a thic
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...