EN 12544-2:2000
(Main)Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method
Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method
This standard specifies a constancy check of a X-ray system where mainly the X-ray voltage is checked and also the tube current and the constitution of the target which can be changing due to ageing of the tube. The thick filter method is based on a measurement of the dose rate behind a defined thick filter using defined distances between the X-ray tube, the filter and the measuring device. This method is very sensitive to changes of the voltage, but it does not provide an absolute value for the X-ray tube voltage.
Zerstörungsfreie Prüfung - Messung und Auswertung der Röntgenröhrenspannung - Teil 2: Konstanzprüfung mit dem Dickfilter-Verfahren
Diese Europäische Norm legt ein Konstanzprüfverfahren für eine Röntgen- anlage fest, wobei die Röntgenspannung besonders empfindlich erfaßt wird, aberauch der Röhrenstrom und der Zustand des Röhrentargets, der einem Alterungsprozeß unterliegen kann. Das Dickfilter-Verfahren basiert auf der Messung der Dosisleistung hinter einem definierten dicken Filter und definiertenAbständen zwischen Röntgenröhre, Filter und Meßinstrument. Dieses Verfahren reagiert sehr empfindlich auf Spannungsänderungen, liefert aber keineAbsolutwerte für die Röntgenröhrenspannung.
Essais non destructifs - Mesurage et évaluation de la tension des tubes radiogènes - Partie 2: Contrôle de la constance selon la méthode du filtre épais
La présente norme décrit une méthode de contrôle de la constance d'un système radiogène; la méthode de contrôle s'applique principalement à la tension du tube et également au courant du tube, à la constitution de la cible, lesquels peuvent subir des variations avec le vieillissement du tube. La méthode du filtre épais est basée sur le mesurage de la dose recueillie derrière un filtre épais défini et selon des distances définies entre le tube, le filtre et l'appareil de mesure.
Neporušitveno preskušanje - Meritve in vrednotenje napetosti na rentgenski cevi - 2. del: Preverjanje konstantnosti z metodo debelega filtra
General Information
- Status
- Withdrawn
- Publication Date
- 15-Feb-2000
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 138 - Non-destructive testing
- Drafting Committee
- CEN/TC 138/WG 1 - Ionizing radiation testing
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 04-Mar-2020
- Completion Date
- 28-Jan-2026
Relations
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
- Effective Date
- 22-Dec-2008
Frequently Asked Questions
EN 12544-2:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method". This standard covers: This standard specifies a constancy check of a X-ray system where mainly the X-ray voltage is checked and also the tube current and the constitution of the target which can be changing due to ageing of the tube. The thick filter method is based on a measurement of the dose rate behind a defined thick filter using defined distances between the X-ray tube, the filter and the measuring device. This method is very sensitive to changes of the voltage, but it does not provide an absolute value for the X-ray tube voltage.
This standard specifies a constancy check of a X-ray system where mainly the X-ray voltage is checked and also the tube current and the constitution of the target which can be changing due to ageing of the tube. The thick filter method is based on a measurement of the dose rate behind a defined thick filter using defined distances between the X-ray tube, the filter and the measuring device. This method is very sensitive to changes of the voltage, but it does not provide an absolute value for the X-ray tube voltage.
EN 12544-2:2000 is classified under the following ICS (International Classification for Standards) categories: 19.100 - Non-destructive testing. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12544-2:2000 has the following relationships with other standards: It is inter standard links to EN ISO 16526-1:2020, EN ISO 16526-2:2020; is excused to EN 12544-3:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12544-2:2000 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 12544-2:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Neporušitveno preskušanje - Meritve in vrednotenje napetosti na rentgenski cevi - 2. del: Preverjanje konstantnosti z metodo debelega filtraZerstörungsfreie Prüfung - Messung und Auswertung der Röntgenröhrenspannung - Teil 2: Konstanzprüfung mit dem Dickfilter-VerfahrenEssais non destructifs - Mesurage et évaluation de la tension des tubes radiogenes - Partie 2: Contrôle de la constance selon la méthode du filtre épaisNon-destructiv
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...