ASTM C1164-92(2003)
(Practice)Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
SIGNIFICANCE AND USE
This practice is designed to present in a standardized format information on the variability of limestone or lime from a single source over a period of time. It can be applied to all materials covered in Test Methods C 25 and C 110, and Specification C 141.
SCOPE
1.1 This practice is intended for use in instances where the purchaser desires information on the uniformity of limestone or lime produced at a single source. It is intended that this test method normally be used for the predominant material manufactured at a plant. Guidelines for sampling, testing and presentation of results (Table 1) are given.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
General Information
Relations
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information.
Designation:C1164–92 (Reapproved 2003)
Standard Practice for
Evaluation of Limestone or Lime Uniformity From a Single
Source
This standard is issued under the fixed designation C1164; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
TABLE 1 High Calcium Quicklime January 1989
1. Scope
1.1 This practice is intended for use in instances where the NOTE 1—This data is presented only as a sample of the correct method
for presentation. Other tests can be substituted and others omitted.
purchaserdesiresinformationontheuniformityoflimestoneor
lime produced at a single source. It is intended that this test Test
Day
method normally be used for the predominant material manu-
Acid Insoluble % CaO % MgO Available CaO
factured at a plant. Guidelines for sampling, testing and
1 0.66 95.85 2.27 94.90
presentation of results (Table 1) are given. 2 0.84 95.03 2.87 94.08
3 1.24 95.85 1.57 94.90
1.2 This standard does not purport to address all of the
4 1.22 96.67 1.49 95.71
safety concerns, if any, associated with its use. It is the
5 1.22 96.26 1.32 95.31
responsibility of the user of this standard to establish appro- 8 0.68 95.85 2.06 94.69
9 0.96 95.54 2.27 94.89
priate safety and health practices and determine the applica-
10 1.26 96.15 1.74 95.20
bility of regulatory limitations prior to use.
11 1.04 96.04 2.00 95.11
13 1.26 96.26 1.51 95.31
2. Referenced Documents 15 1.34 95.23 2.09 94.28
16 1.28 95.44 2.34 94.69
2.1 ASTM Standards:
19 0.68 96.15 1.46 95.20
C25 Test Methods for Chemical Analysis of Limestone, 20 1.42 95.85 1.27 94.90
22 1.06 95.85 1.86 94.90
Quicklime, and Hydrated Lime
23 0.58 96.15 2.09 95.31
C50 Practice for Sampling, Sample Preparation, Packaging,
24 0.84 95.03 2.61 94.08
and Marking of Lime and Limestone Products 26 1.28 95.64 1.39 94.69
27 1.48 95.54 1.58 94.39
C51 Terminology Relating to Lime and Limestone (as used
29 0.98 94.82 2.71 93.67
by the Industry)
30 1.24 94.41 3.42 93.67
C110 Test Methods for Physical Testing of Quicklime,
Avg 1.07 95.70 2.00 94.76
Hydrated Lime, and Limestone
Range 0.90 2.26 2.15 2.04
Std Dev 0.26 0.54 0.56 0.54
C141 Specification for Hydraulic Hydrated Lime for Struc-
tural Purposes
3. Terminology
a single source over a period of time. It can be applied to all
3.1 Definitions:
materials covered in Test Methods C25 and C110, and Speci-
3.1.1 Fordefinitionsoftermsrelatingtothispracticereferto
fication C141.
Terminology C51.
5. Sampling
4. Significance and Use
5.1 The sampling shall be done in accordance with Methods
4.1 This practice is designed to present in a standardized
C50.
format information on the variability of limestone or lime from
5.2 All sampling shall be performed by personnel qualified
by specific training for this purpose.
This practice is under the jurisdiction of ASTM Committee C07 on Lime and
5.3 Datapointsshallbeanaverageofthreeormoreseparate
is the direct responsibility of Subcommittee C07.11 on Statistics.
determinationsrelativetoaspecifiedunitoftime.Forexample:
Current edition approved Feb. 15, 1992. Published April 1992. Originally
approved in 1990. Last previous edition approved in 1991 as C1164 – 91. DOI: (1) n determinations for daily average, (2) daily determinations
10.1520/C1164-92R03.
for weekly average.
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
5.4 The samples shall be identified by the date or dates that
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
the represented material was obtained.
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
C1164–92 (2003)
6. Proced
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.