iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM C1093-19

(Practice)

Standard Practice for Accreditation of Testing Agencies for Masonry

Standard Practice for Accreditation of Testing Agencies for Masonry

SIGNIFICANCE AND USE
4.1 This practice provides the basic minimum criteria for use in evaluating the qualifications of testing agencies for masonry materials. The criteria may be supplemented by more specific criteria and requirements. It can be used as a guide for internal audits by individual users.  
4.2 The intent of this practice is to provide a consensus basis for evaluating a testing agency, with respect to that agency's capability to objectively and competently provide the specific services needed by the user.  
4.3 This practice may be used as a basis for accreditation.
SCOPE
1.1 This practice covers the minimum requirements for laboratory personnel, for establishing and maintaining a quality system, and it establishes minimum qualifications for agencies engaged in the testing of masonry materials.  
1.2 Criteria are provided for evaluating the capability of an agency to properly perform designated tests on masonry materials, and for establishing guidelines pertaining to an agency's organization, personnel, facilities, and quality system. This practice may be supplemented by more specific criteria and requirements for particular projects.  
1.3 This practice can be used as a basis to evaluate testing agencies, and it is intended for use for the qualifying or accrediting of testing agencies, or both, public or private, engaged in the testing of masonry materials.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Information

Status
Historical
Publication Date
14-Dec-2019
ICS
03.120.20 - Product and company certification. Conformity assessment
Technical Committee
C15 - Manufactured Masonry Units
Drafting Committee
C15.07 - Standards for Laboratory Accreditation
Current Stage
Ref Project

Buy Standard

ASTM C1093-19 - Standard Practice for Accreditation of Testing Agencies for MasonryASTM C1093-19 - Standard Practice for Accreditation of Testing Agencies for Masonry
PreviousNext
Standard
ASTM C1093-19 - Standard Practice for Accreditation of Testing Agencies for Masonry
English language
6 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ASTM C1093-19 - Standard Practice for Accreditation of Testing Agencies for MasonryREDLINE ASTM C1093-19 - Standard Practice for Accreditation of Testing Agencies for Masonry
PreviousNext
Standard
REDLINE ASTM C1093-19 - Standard Practice for Accreditation of Testing Agencies for Masonry
English language
6 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: C1093 − 19
Standard Practice for
1
Accreditation of Testing Agencies for Masonry
This standard is issued under the fixed designation C1093; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope* C117 Test Method for Materials Finer than 75-µm (No. 200)
Sieve in Mineral Aggregates by Washing
1.1 This practice covers the minimum requirements for
C136/C136M Test Method for Sieve Analysis of Fine and
laboratorypersonnel,forestablishingandmaintainingaquality
Coarse Aggregates
system, and it establishes minimum qualifications for agencies
C140/C140M Test Methods for Sampling and Testing Con-
engaged in the testing of masonry materials.
crete Masonry Units and Related Units
1.2 Criteria are provided for evaluating the capability of an
C143/C143M Test Method for Slump of Hydraulic-Cement
agency to properly perform designated tests on masonry
Concrete
materials, and for establishing guidelines pertaining to an
C173/C173M Test Method forAir Content of Freshly Mixed
agency’sorganization,personnel,facilities,andqualitysystem.
Concrete by the Volumetric Method
This practice may be supplemented by more specific criteria
C185 Test Method for Air Content of Hydraulic Cement
and requirements for particular projects.
Mortar
1.3 This practice can be used as a basis to evaluate testing C230/C230M Specification for Flow Table for Use in Tests
of Hydraulic Cement
agencies, and it is intended for use for the qualifying or
accrediting of testing agencies, or both, public or private, C231/C231M Test Method forAir Content of Freshly Mixed
Concrete by the Pressure Method
engaged in the testing of masonry materials.
C270 Specification for Mortar for Unit Masonry
1.4 This standard does not purport to address all of the
C305 Practice for Mechanical Mixing of Hydraulic Cement
safety concerns, if any, associated with its use. It is the
Pastes and Mortars of Plastic Consistency
responsibility of the user of this standard to establish appro-
C470/C470M Specification for Molds for Forming Concrete
priate safety, health, and environmental practices and deter-
Test Cylinders Vertically
mine the applicability of regulatory limitations prior to use.
C780 Test Method for Preconstruction and Construction
1.5 This international standard was developed in accor-
Evaluation of Mortars for Plain and Reinforced Unit
dance with internationally recognized principles on standard-
Masonry
ization established in the Decision on Principles for the
C1019 Test Method for Sampling and Testing Grout for
Development of International Standards, Guides and Recom-
Masonry
mendations issued by the World Trade Organization Technical
C1072 Test Methods for Measurement of Masonry Flexural
Barriers to Trade (TBT) Committee.
Bond Strength
2. Referenced Documents
C1232 Terminology for Masonry
2
C1314 Test Method for Compressive Strength of Masonry
2.1 ASTM Standards:
Prisms
C67/C67M Test Methods for Sampling and Testing Brick
C1506 Test Method for Water Retention of Hydraulic
and Structural Clay Tile
Cement-Based Mortars and Plasters
C109/C109M Test Method for Compressive Strength of
C1552 Practice for Capping Concrete Masonry Units, Re-
Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube
lated Units and Masonry Prisms for Compression Testing
Specimens)
E4 Practices for Force Verification of Testing Machines
E11 Specification for Woven Wire Test Sieve Cloth and Test
1
This practice is under the jurisdiction of ASTM Committee C15 on Manufac-
tured Masonry Units and is the direct responsibility of Subcommittee C15.07 on Sieves
Standards for Laboratory Accreditation.
Current edition approved Dec. 15, 2019. Published January 2020. Originally
3. Terminology
ɛ1
approved in 1988. Last previous edition approved in 2015 as C1093 – 15a . DOI:
10.1520/C1093-19
3.1 Definitions:
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
3.1.1 quality system—the organizational structure,
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
responsibilities, procedures, processes, capabilities, and re-
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website. sources for implementing quality management.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
C1093 − 19
3.2 Definitions of Terms Specific to This Standard: 7.2 Supervising Laboratory Technician—The supervising
3.2.1 agency—the organization engaged to t
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
´1
Designation: C1093 − 15a C1093 − 19
Standard Practice for
1
Accreditation of Testing Agencies for Masonry
This standard is issued under the fixed designation C1093; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1
ε NOTE—Editorially corrected 7.2 in July 2016.
1. Scope*
1.1 This practice covers the minimum requirements for laboratory personnel, for establishing and maintaining a quality system,
and it establishes minimum qualifications for agencies engaged in the testing of masonry materials.
1.2 Criteria are provided for evaluating the capability of an agency to properly perform designated tests on masonry materials,
and for establishing guidelines pertaining to an agency’s organization, personnel, facilities, and quality system. This practice may
be supplemented by more specific criteria and requirements for particular projects.
1.3 This practice can be used as a basis to evaluate testing agencies, and it is intended for use for the qualifying or accrediting
of testing agencies, or both, public or private, engaged in the testing of masonry materials.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety safety, health, and healthenvironmental practices and determine the
applicability of regulatory limitations prior to use.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization
established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued
by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents
2
2.1 ASTM Standards:
C67C67/C67M Test Methods for Sampling and Testing Brick and Structural Clay Tile
C109/C109M Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
C117 Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
C136C136/C136M Test Method for Sieve Analysis of Fine and Coarse Aggregates
C140C140/C140M Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
C143/C143M Test Method for Slump of Hydraulic-Cement Concrete
C173/C173M Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
C185 Test Method for Air Content of Hydraulic Cement Mortar
C230/C230M Specification for Flow Table for Use in Tests of Hydraulic Cement
C231C231/C231M Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
C270 Specification for Mortar for Unit Masonry
C305 Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
C470/C470M Specification for Molds for Forming Concrete Test Cylinders Vertically
C780 Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
C1019 Test Method for Sampling and Testing Grout for Masonry
C1072 Test Methods for Measurement of Masonry Flexural Bond Strength
C1232 Terminology for Masonry
C1314 Test Method for Compressive Strength of Masonry Prisms
C1506 Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
1
This practice is under the jurisdiction of ASTM Committee C15 on Manufactured Masonry Units and is the direct responsibility of Subcommittee C15.07 on Standards
for Laboratory Accreditation.
Current edition approved Dec. 15, 2015Dec. 15, 2019. Published January 2016January 2020. Originally approved in 1988. Last previous edition approved in 2015 as
ɛ1
C1093 – 15.C1093 – 15a . DOI: 10.1520/C1093-15AE01.10.1520/C1093-19
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
C1093 − 19
C1552 Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
E4 Practices for Force Verific
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM C1093-23(Practice)
Standard Practice for Accreditation of Testing Agencies for Masonry

SIGNIFICANCE AND USE
4.1 This practice provides the basic minimum criteria for use in evaluating the qualifications of testing agencies for masonry materials. The criteria may be supplemented by more specific criteria and requirements. It can be used as a guide for internal audits by individual users.  
4.2 The intent of this practice is to provide a consensus basis for evaluating a testing agency, with respect to that agency's capability to objectively and competently provide the specific services needed by the user.  
4.3 This practice may be used as a basis for accreditation.
SCOPE
1.1 This practice covers the minimum requirements for laboratory personnel, for establishing and maintaining a quality system, and it establishes minimum qualifications for agencies engaged in the testing of masonry materials.  
1.2 Criteria are provided for evaluating the capability of an agency to properly perform designated tests on masonry materials, and for establishing guidelines pertaining to an agency's organization, personnel, facilities, and quality system. This practice may be supplemented by more specific criteria and requirements for particular projects.  
1.3 This practice can be used as a basis to evaluate testing agencies, and it is intended for use for the qualifying or accrediting of testing agencies, or both, public or private, engaged in the testing of masonry materials.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
ASTM
ASTM D3740-23(Practice)
Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction

SIGNIFICANCE AND USE
4.1 This practice provides the basic minimum criteria for use in evaluating the qualifications of a testing or inspection agency, or both, for soil and rock. The criteria may be supplemented by more specific criteria and requirements. An individual user can also use it to judge the qualification of an agency. The existence of a formal accrediting body such as a federal, state, or independent agency is not necessary for the use of this standard.
Note 1: Users of this practice should be aware that certain of these requirements may not be achievable and/or applicable to work performed outside of the United States of America (U.S.A.). In such cases, users should make sure that all necessary modifications are made to these requirements such as to render them appropriate to each specific set of circumstances.  
4.2 The intent of this practice is to provide a consensus basis for evaluating a testing or inspection agency, or both, with respect to that agency's capability to objectively and competently provide the specific services needed by the user.  
4.3 This practice may be used as a basis for accreditation.  
4.4 The users of an accredited agency must review the agency's scope of accreditation to make sure the agency has been accredited for its technical competence to perform the tasks requested by the user.
SCOPE
1.1 This practice establishes minimum qualifications for agencies engaged in the testing and inspection of soil and rock. Minimum requirements for field and laboratory personnel are defined. The practice also covers the establishment and maintenance of a quality system.  
1.2 Criteria are provided for evaluating the capability of an agency to properly perform designated tests on soil and rock, and for establishing essential characteristics pertaining to an agency's organization, personnel, facilities, and quality system. This practice may be supplemented by more specific criteria and requirements for particular projects.  
1.3 This practice can be used as a basis to evaluate testing and inspection agencies, or both, and is intended for use for the qualifying or accrediting, or both, of testing or inspection agencies, public or private, engaged in the testing and inspection of soil and rock as used in engineering design and construction.  
1.4 To qualify for accreditation to this standard, the agency must include at least five standards relating to testing methods, inspection methods, or both, from the standards covered under the jurisdictions of Committee D18, in its certificate of accreditation.  
1.5 This practice is applicable to all standards which include a reference to Practice D3740.  
1.6 The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.  
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.8 This practice offers a set of instructions for performing one or more specific operations. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this practice may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. The word “Standard” in the title of this document means only that the document has been approved through the ASTM consensus process.  
1.9 This international standard was developed in accordance with internationally recognized principles on standardizat...

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
ASTM
ASTM C1093-23(Practice)
Standard Practice for Accreditation of Testing Agencies for Masonry

SIGNIFICANCE AND USE
4.1 This practice provides the basic minimum criteria for use in evaluating the qualifications of testing agencies for masonry materials. The criteria may be supplemented by more specific criteria and requirements. It can be used as a guide for internal audits by individual users.  
4.2 The intent of this practice is to provide a consensus basis for evaluating a testing agency, with respect to that agency's capability to objectively and competently provide the specific services needed by the user.  
4.3 This practice may be used as a basis for accreditation.
SCOPE
1.1 This practice covers the minimum requirements for laboratory personnel, for establishing and maintaining a quality system, and it establishes minimum qualifications for agencies engaged in the testing of masonry materials.  
1.2 Criteria are provided for evaluating the capability of an agency to properly perform designated tests on masonry materials, and for establishing guidelines pertaining to an agency's organization, personnel, facilities, and quality system. This practice may be supplemented by more specific criteria and requirements for particular projects.  
1.3 This practice can be used as a basis to evaluate testing agencies, and it is intended for use for the qualifying or accrediting of testing agencies, or both, public or private, engaged in the testing of masonry materials.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
ASTM
ASTM E860-22(Practice)
Standard Practice for Examining and Preparing Items That Are or May Become Involved in Criminal or Civil Litigation

SIGNIFICANCE AND USE
4.1 This practice establishes procedures to be followed by the forensic science practitioner to document the nature, state, or condition of items of evidence. It also describes specific actions that are required for destructive testing if planned testing, examination, disassembly, or other actions are likely to alter the nature, state, or condition of the evidence so as to preclude or adversely limit additional examination or testing.  
4.2 Deviations from this practice are not necessarily wrong or inferior, but such deviations should be justified and documented.
SCOPE
1.1 This practice covers procedures for the examination and testing of evidence items or systems that may have been involved in a specific incident which are, or may be reasonably expected to be, the subject of civil or criminal litigation.  
1.2 This practice is applicable when it is determined that examination or testing of evidence is required, and such examination is likely to change the nature, state, or condition of the evidence.  
1.3 This practice is intended for use by competent forensic science practitioners with the requisite formal education, discipline-specific training (see Practice E2917), and demonstrated proficiency to perform forensic casework.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM F3069-14(2022)(Guide)
Standard Guide for Requirements for Bodies That Operate Certification Programs in the Field of Search and Rescue

SIGNIFICANCE AND USE
4.1 A certification body issuing certifications in the field of search and rescue is required to meet the requirements identified in this guide.  
4.2 This guide can be used by an authority having jurisdiction to determine whether to accept a certification from a certification body.  
4.3 This guide can be used by an authority having jurisdiction to validate audit a certifying body.  
4.4 This guide can be used by a certifying body to validate that its certification scheme, certification process, and certification system meet industry standards.  
4.5 Any certification body operating in accordance to ANSI-ISO-IEC 17024 or equivalent shall be considered to be in compliance with this standard.
SCOPE
1.1 This guide defines the organizational structure, policies, and procedures required to operate a certification program in the field of search and rescue.  
1.2 Certifications are used by authorities having jurisdiction as a component to their credentialing process, typically to demonstrate one component of an individual’s ability to field.  
1.3 Certifications are typically provided by third party, disinterested providers and are commonly used to validate an individual’s, team’s, or authority having jurisdiction’s training program in a particular area.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    4 pages
    English language
    sale 15% off
ASTM
ASTM F3526-21(Guide)
Standard Guide for Aircraft Instrument Systems Technician Certification

SIGNIFICANCE AND USE
4.1 The guide is intended to be used to assess competencies of qualified individuals who wish to become certified as an AIS Technician through a certification program.  
4.2 The guide is intended to be used in concert with a certification provider’s structure and materials for management, exam delivery, and candidate preparation.
SCOPE
1.1 The purpose of this guide is to address the basic fundamental subject knowledge activities and functions for avionics professionals to be titled Aircraft Instrument Systems (AIS) Technician.  
1.2 This guide is the basis for the Aircraft Instrument Systems certification, an endorsement to the Aircraft Electronics Technician (AET) certification. Candidates must be a certified AET to take the certification exam associated with this guide.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    4 pages
    English language
    sale 15% off
ASTM
ASTM E2936-20(Guide)
Standard Guide for Contractor Self-Assessment for U.S. Government Asset Management Systems

SIGNIFICANCE AND USE
4.1 The intent of this guide is to provide a foundation for the minimum effective internal assessment of a contractor’s government asset management system. A contractor may incorporate all or part of this guide in accordance with its established procedures and operating environment. Self-assessment should be used to identify deficiencies, related increases to risk, and to serve as a method for obtaining correction to those deficiencies, independent of, and often in advance of, a government audit, review or assessment. It should also be used to assist in determining the effective assignment of asset management resources; and to serve as a method for promoting continuous improvement in asset management practices. Self-assessments, in and of themselves may not be sufficiently independent to address external or government review, assessment, or audit requirements.  
4.2 To the extent possible, a Contractor Self-Assessment (CSA) program should provide a level of objectivity like that of an asset management system analysis performed by a government or other external auditor. Individuals who perform assessments should not be the same individuals who perform the functions being tested when enough resources are available. The contractor’s official written procedures should identify functional positions responsible for performing the self-assessment and address management controls used to maintain independence and prevent conflicts of interest whenever individuals who perform property functions also participate in CSA activities.  
4.3 The results of the CSA alone do not determine adequacy or inadequacy of the contractor’s government asset management system but should identify the level of risk presented by the contractor’s business practices. The results of the CSA should be made available to external auditors or reviewers for potential inclusion in their audits or reports in accordance with contractual requirements and the contractor’s procedures.
SCOPE
1.1 This guide is intended to be used by entities engaged in contracts with the Government of the United States of America.  
1.2 This guide applies to the current version of the FAR Government Property clause 52.245-1 dated January 2017. Entities with earlier or subsequently dated requirements/contracts should address any contractual difference when applying this guide.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    8 pages
    English language
    sale 15% off
  • Guide
    8 pages
    English language
    sale 15% off
ASTM
ASTM E3215-19a(Practice)
Standard Practice for Certification of Less Lethal Aerosol Devices Used by Law Enforcement, Corrections, and Other Public Safety Officers

SCOPE
1.1 This practice establishes the certification requirements for less lethal aerosol devices used by law enforcement, corrections officers, and other public safety officers.  
1.1.1 This practice is intended to be used by certification bodies and by purchasers and suppliers in the procurement of less lethal aerosol devices that meet Specification E3187/E3187M.  
1.1.2 The performance, testing, labeling, documentation, and reporting requirements for certification are specified in Specification E3187/E3187M.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    English language
    sale 15% off
ASTM
ASTM D6631-05(2019)(Guide)
Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method

SIGNIFICANCE AND USE
3.1 The purpose of an interlaboratory evaluation, as defined in this guide, is to determine the variability of results obtained in different laboratories on equivalent equipment using a prescribed test method.  
3.2 The definitions of statistical terms used in this guide are contained in Terminology E456.
SCOPE
1.1 This guide covers a simplified statistical procedure for planning and conducting interlaboratory evaluations of test methods.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    3 pages
    English language
    sale 15% off
ASTM
ASTM F3245-19(Guide)
Standard Guide for Aircraft Electronics Technician Personnel Certification

SIGNIFICANCE AND USE
4.1 The guide is intended to be used to assess competencies of qualified individuals who wish to become certified as an Aircraft Electronics Technician through a certification program.  
4.2 The guide is intended to be used in concert with a certification provider’s structure and materials for management, exam delivery, and candidate preparation.
SCOPE
1.1 The purpose of this guide is to address the basic fundamental subject knowledge, task performance, and task knowledge activities and functions for avionics professionals to be titled Aircraft Electronics Technicians (AETs).  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    7 pages
    English language
    sale 15% off
  • Guide
    7 pages
    English language
    sale 15% off