ASTM D4286-90(1999)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: D 4286 – 90 (Reapproved 1999)
Standard Practice for
Determining Coating Contractor Qualifications for Nuclear
Powered Electric Generation Facilities
This standard is issued under the fixed designation D 4286; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope D 4537 Guide for Establishing Procedures to Qualify and
Certify Inspection Personnel for Coating Work in Nuclear
1.1 This practice provides a criteria guide and procedural
Facilities
method to assist utility owners, architects, engineers, construc-
2.2 American National Standard:
tors, and other selection agencies in determining the overall
N 45.2.6 Qualifications of Inspection, Examination, and
qualifications of a coating contractor to execute coating work
Testing Personnel for Nuclear Power Plants
for the primary containment and other safety-related facilities
2.3 Other Standard:
of light-water nuclear power plants.
Nuclear Regulatory Agency 10 CFR 50 Appendix B, Qual-
1.2 The qualification criteria and requirements address the
ity Assurance Criteria for Nuclear Power Plants
essential basic capability of a contractor to execute nuclear
coating work. Obviously, the specific capability to execute
3. Personnel
those requirements unique to a given project must also be
3.1 Home Offıce Management and Staff—Resumes of the
carefully considered. The evaluation procedure contained in
following types of personnel including educational back-
this practice is designed to be adaptive to this detailed final
ground, duration and degree of involvement in industrial
qualification process.Variation or simplification of the practice
coating operations, qualifications, registrations, certifications,
is appropriate for non safety-related areas of nuclear power
and specific experience in nuclear coating work.
plants, fossil fueled facilities, and other industrial projects.
3.1.1 Principals and General Management.
1.3 The overall capability of a contractor to successfully
3.1.2 Engineering Manager.
execute the varied and complex requirements of nuclear
3.1.3 Project Engineers—List specific nuclear coating work
coating work is dependent upon competency in a variety of
project involvement.
essential categories.
3.1.4 QA/QC Manager—List specific qualification/
1.4 The nine evaluation categories described in Sections
certification credentials per ANSI N 45.2.6, or Guide D 4537,
3-12 detail the specific data to be provided by the contractor as
or both.
essentialtodeterminingqualificationstatus.Inaddition,atenth
3.2 General Field Supervision—Resumes to include spe-
untitled category has been provided on the evaluation work
cific nuclear coatings work experience.
described in Section 12 for inclusion of other information
3.3 On-Site Project Supervision:
pertinent to a specific project.
3.3.1 Total number of personnel qualified for nuclear coat-
1.5 This standard does not purport to address all of the
ings work, including specific work history.
safety concerns, if any, associated with its use. It is the
3.3.2 Total number available in a specific time frame, if
responsibility of the user of this standard to establish appro-
appropriate.
priate safety and health practices and determine the applica-
bility of regulatory limitations prior to use.
4. Contractor Work Experience
4.1 General Experience—List of comparable industrial
2. Referenced Documents
projects, including type (construction or maintenance), form of
2.1 ASTM Standards:
contract, dollar volume, scope, and duration (start and comple-
D 3843 Practice for Quality Assurance for Protective Coat-
tion dates) executed during the past five years. Accompanying
ings Applied to Nuclear Facilities
this listing provide personnel references to include names,
titles, locations, and telephone numbers.
This practice is under the jurisdiction of ASTM Committee D33 on Protective
Coating and Lining Work for Power Generation Facilities and is the direct
responsibility of Subcommittee D33.05 on Application and Surface Preparation. Available from American National Standards Institute, 11 W. 42nd St., 13th
Current edition approved Feb. 8, 2001. Published May 1990. Originally Floor, New York, NY 10036.
published as D 4286 – 84. Last previous edition D 4286 – 84. Available from Superintendent of Documents, U.S. Government Printing
Annual Book of ASTM Standards, Vol 06.02. Office, Washington, DC 20402.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
D 4286 – 90 (1999)
4.2 Nuclear Coating Work Experience: 9. Production/Cost Control
4.2.1 Listofnuclearprojectsincludingtype(constructionor
9.1 Submit explanation of methods and procedures utilized
maintenance), form of contract, dollar volume, scope, and
to monitor and regulate personnel and equipment productivity.
duration, materials, and equipment involved. Accompanying
9.2 Submit sample of actual report forms utilized to record
this listing provide personnel references to include names,
job progress, labor cost analysis, and equi
...