29.140 - Lamps and related equipment
ICS 29.140 Details
Lamps and related equipment
Lampen. Lampenzubehor
Lampes et accessoires
Žarnice in pribor
General Information
Frequently Asked Questions
ICS 29.140 is a classification code in the International Classification for Standards (ICS) system. It covers "Lamps and related equipment". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 2509 standards classified under ICS 29.140 (Lamps and related equipment). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 29.140 - Lamps and related equipment
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
IEC 63545:2026 specifies safety requirements for horticultural luminaires, incorporating electric light sources for operation from supply voltage up to 1 000 V.
- Draft23 pagesEnglish languagee-Library read for1 day
IEC 63356-1:2026 is available as IEC 63356-1:2026 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 63356-1:2026 specifies data sheets of LED lamps and LED modules with a series of parameters per data sheet for a specific LED light source that enables interchangeability between products from different LED light source manufacturers. NOTE Compliance criteria relating to data sheet parameters in this document are covered by IEC 63554 or IEC 62031 for safety, and IEC 63555 for performance. This third edition cancels and replaces the second edition published in 2023. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) addition of datasheets for GJ6.6d-2-x capped LED lamps.
- Draft86 pagesEnglish languagee-Library read for1 day
- Amendment6 pagesEnglish languagee-Library read for1 day
IEC TR 63645:2026 provides a comprehensive range of environment related information sources to assist with understanding, assessing, and advancing the environmental performance of lighting products.
- Technical report77 pagesEnglish languagesale 15% off
IEC TR 63139:2026 provides explanations and background information on electrical safety requirements in TC 34 standards.
- Technical report22 pagesEnglish languagesale 15% off
- Technical report45 pagesEnglish languagesale 15% off
IEC 62031:2026 specifies safety requirements for LED modules for operation on DC supplies up to 1 500 V or on AC supplies up to 1 000 V. This document does not include requirements for performance characteristics of LED modules.
This document does not apply to:
- LED packages;
- LED modules for automotive lighting;
- OLED modules;
- LED lamps.
This third edition cancels and replaces the second edition published in 2018. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Complete review of the document structure, detailed technical requirements and tests, including but not limited to what is individually described under items b) to i);
b) Clarification of the scope and revision of the applicability of this document to independent and integral LED modules;
c) Updated terms and definitions;
d) Clearer specification for clause general requirements and clause general test requirements;
e) Update of the marking clause, such as marking of control terminals;
f) A full review and update of the electrical safety, thermal safety, and mechanical safety requirements preventing misinterpretation and ambiguity;
g) Updated photobiological safety requirements;
h) Revised and updated fault conditions and abnormal conditions requirements;
i) Removal of the annex relating to conformity testing during manufacture.
- Standard46 pagesEnglish languagesale 15% off
- Standard48 pagesFrench languagesale 15% off
- Standard94 pagesEnglish and French languagesale 15% off
IEC 63545:2026 specifies safety requirements for horticultural luminaires, incorporating electric light sources for operation from supply voltage up to 1 000 V.
- Standard22 pagesEnglish languagesale 15% off
- Standard23 pagesFrench languagesale 15% off
- Standard45 pagesEnglish and French languagesale 15% off
IEC 63494‑2-1:2026 specifies the interchangeability requirements of an electro-mechanical interface with four-pin extra-low-voltage (ELV) twist-lock interface – type ZB18 for use in lighting systems. This twist-lock interface has four electrical contacts that are suitable for ELV voltages. Two connections are intended for supply power and two are intended for digital communication. This document specifies interchangeability related requirements for mechanical, electrical, ambient conditions, positional orientation, communication protocol and pin assignments for the interface. Specific requirements for the devices that can utilize the interface such as sensors, communication modules, cameras, etc., are not within the scope of this document. This document does not specify the following aspects:
- the lighting technology,
- the illumination performance,
- electromagnetic compatibility (EMC).
- Standard27 pagesEnglish languagesale 15% off
- Standard29 pagesFrench languagesale 15% off
- Standard56 pagesEnglish and French languagesale 15% off
IEC 63356-1:2026 is available as IEC 63356-1:2026 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 63356-1:2026 specifies data sheets of LED lamps and LED modules with a series of parameters per data sheet for a specific LED light source that enables interchangeability between products from different LED light source manufacturers.
NOTE Compliance criteria relating to data sheet parameters in this document are covered by IEC 63554 or IEC 62031 for safety, and IEC 63555 for performance.
This third edition cancels and replaces the second edition published in 2023. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) addition of datasheets for GJ6.6d-2-x capped LED lamps.
- Standard91 pagesEnglish languagesale 15% off
- Standard273 pagesEnglish languagesale 15% off
- Standard91 pagesFrench languagesale 15% off
- Standard182 pagesEnglish and French languagesale 15% off
- Amendment9 pagesEnglish languagee-Library read for1 day
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
- Standard6 pagesEnglish and French languagesale 15% off
IEC 60743:2013 applies to the terminology used to describe tools, devices, equipment and methods used in live working. It standardizes the name of tools, devices and equipment and permits their identification by providing definitions and illustrations. It contains some example illustrations. This third edition cancels and replaces the second edition, published in 2001, and its Amendment 1:2008.This edition constitutes a technical revision which includes the following significant technical changes with respect to the previous edition: the clause 2 has been simplified and refers directly to IEC 60050-651; some definitions have been moved to specific existing clauses. This new edition is complementary to IEC 60050-651. Different publications under the responsibility of TC 78 include terms and its definitions. IEC 60050-651 (IEV 651) provides precise, brief and correct definitions of internationally accepted concepts in the field of live working, and specifies the terms by which these defined concepts are known. Electropedia gives access to the terms and definitions of IEC 60050-651 (http://www.electropedia.org/). Each product standard gives definitions necessary for the understanding of certain terms used in a specific context. The IEC Glossary (http://std.iec.ch/glossary) gives on-line access to the information.
- Standard128 pagesEnglish and French languagesale 15% off
- Standard260 pagesEnglish and French languagesale 15% off
IEC 63494-1:2026 specifies the safety requirements for electro-mechanical interfaces connecting lighting system devices to luminaires. These interfaces are used to mechanically connect, electrically power, and enable communication of lighting system devices on luminaires. Electro-mechanical interfaces up to and including 1 000 V AC or 1 500 V DC are included. This document specifies safety related mechanical, electrical, ambient conditions, and construction requirements for the interface components including protective covers. Specific requirements for the devices that can utilize the interface such as sensors, communication modules, cameras, etc., are not within the scope of this document.
- Standard17 pagesEnglish languagesale 15% off
- Standard18 pagesFrench languagesale 15% off
- Standard35 pagesEnglish and French languagesale 15% off
Subscribe to IEC 60061 Database to access the full and updated content of the series.
- Corrigendum1 pageEnglish languagee-Library read for1 day
- Technical report10 pagesEnglish languagesale 15% off
- Amendment9 pagesEnglish languagee-Library read for1 day
IEC TR 63633:2025 provides information on safety related aspects relevant for the design and application of LED lamps that can be used as a replacement for lamps of different technology (for example, incandescent, fluorescent or HID).
- Technical report6 pagesEnglish languagesale 15% off
IEC 60598-2-1:2025 specifies requirements for fixed general purpose luminaires for use with electric light sources on supply voltages not exceeding 1 000 V. This third edition cancels and replaces the second edition published in 2020. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) The clause numbers and structure have been aligned with those of IEC 60598‑1.
- Standard7 pagesEnglish languagesale 15% off
- Standard277 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
- Standard14 pagesEnglish and French languagesale 15% off
IEC 62386-351:2025 is applicable to control devices to be used in, on, or attached to, a luminaire. This document builds on the digital addressable lighting interface as specified in the IEC 62386 series of standards, by adding specific requirements for power consumption, integrated bus and AUX power supplies, a mechanism to arbitrate between multiple application controllers, and a memory bank definition for multi-master devices.
This document is only applicable to control devices complying with IEC 62386‑103.
- Standard19 pagesEnglish languagee-Library read for1 day
- Standard22 pagesEnglish and French languagesale 15% off
- Standard20 pagesEnglish and French languagesale 15% off
- Standard6 pagesEnglish languagesale 15% off
- Standard6 pagesFrench languagesale 15% off
- Standard12 pagesEnglish and French languagesale 15% off
IEC 63129:2020 describes a method, based on measurements combined with calculations, to determine specific characteristics of the inrush current of single and/or multiple lighting products of the same type. Lighting products include the following:
- light sources with integrated controlgear,
- controlgear,
- luminaires.
- Standard42 pagesEnglish languagesale 15% off
- Standard37 pagesEnglish and French languagesale 15% off
IEC 62386-351:2025 is applicable to control devices to be used in, on, or attached to, a luminaire. This document builds on the digital addressable lighting interface as specified in the IEC 62386 series of standards, by adding specific requirements for power consumption, integrated bus and AUX power supplies, a mechanism to arbitrate between multiple application controllers, and a memory bank definition for multi-master devices. This document is only applicable to control devices complying with IEC 62386‑103.
- Standard19 pagesEnglish languagee-Library read for1 day
IEC 62386-351:2025 is applicable to control devices to be used in, on, or attached to, a luminaire. This document builds on the digital addressable lighting interface as specified in the IEC 62386 series of standards, by adding specific requirements for power consumption, integrated bus and AUX power supplies, a mechanism to arbitrate between multiple application controllers, and a memory bank definition for multi-master devices.
This document is only applicable to control devices complying with IEC 62386‑103.
- Standard15 pagesEnglish languagesale 15% off
- Standard16 pagesFrench languagesale 15% off
- Standard31 pagesEnglish and French languagesale 15% off
IEC 61995-2:2025, which is used in conjunction with IEC 61995‑1:2025, applies to devices for the connection of luminaires (DCL) 250 V AC, 6 A intended for household and similar purposes, for the electrical connection of fixed luminaires. It defines an interface design as specified in the given standard sheets.
This second edition cancels and replaces the first edition published in 2009 and Amendment 1:2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) technical requirements related to the force required to withdraw the plug have been moved to IEC 61995-1;
b) alignment with new edition of IEC 61995-1.
- Standard9 pagesEnglish languagesale 15% off
- Standard9 pagesFrench languagesale 15% off
- Standard18 pagesEnglish and French languagesale 15% off
IEC 61995-1:2025 applies to devices for the connection of luminaires (DCL) intended for household and similar purposes, for the electrical connection of fixed luminaires of class I or class II to final circuits rated at not more than 16 A without mechanical support for the luminaires incorporated in the plug/outlet interface. The DCL retention mechanisms are not intended to support the weight of the luminaires.
This second edition cancels and replaces the first edition published in 2005 and Amendment 1:2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) additional requirements and tests for additional suspension means;
b) additional requirements and tests for additional functions;
c) additional requirements and tests for floating type DCLs;
d) introduction of insulation piercing terminals (IPT);
e) additional classification according to the connection capacities of the DCL outlet terminals;
f) modification of maximum withdrawal force for plugs with enabled locking means;
g) improvements of temperature rise tests.
- Standard86 pagesEnglish languagesale 15% off
- Standard89 pagesFrench languagesale 15% off
- Standard175 pagesEnglish and French languagesale 15% off
- Amendment11 pagesEnglish languagee-Library read for1 day
- Amendment11 pagesEnglish languagee-Library read for1 day
- Standard4 pagesEnglish and French languagesale 15% off
- Amendment11 pagesEnglish languagee-Library read for1 day
- Amendment11 pagesEnglish languagee-Library read for1 day
- Draft44 pagesEnglish languagee-Library read for1 day
IEC PAS 63629:2025 sets out the specific rules for luminaires and defines the product specifications to be adopted by manufacturers in the development of their Product Environmental Profiles (PEP) particularly with regard to:
- the technology and its type of application,
- the conventional typical lifetime taken into account for the Life Cycle Assessment (LCA),
- the conventional use scenarios to be adopted during the product use stage.
- Technical specification127 pagesEnglish languagesale 15% off
IEC 62868-2-1:2020 specifies safety requirements for semi-integrated organic light emitting diode modules operating with an external controlgear connected to the mains voltage, and which, in addition, have a control means inside ("semi-integrated") for operation under constant voltage, constant current or constant power and have a rated voltage up to 120 V ripple free DC or 50 V AC RMS at 50 Hz or 60 Hz.
- Standard21 pagesEnglish languagesale 15% off
- Standard16 pagesEnglish and French languagesale 15% off
- Standard16 pagesEnglish and French languagesale 15% off
- Standard16 pagesEnglish and French languagesale 15% off
IEC 62868-2-2:2020 specifies the safety requirements for integrated organic light-emitting diode (OLED) modules for use on ripple free DC supplies up to 1000 V or AC supplies up to 1 000 V RMS at 50 Hz or 60Hz.
- Standard25 pagesEnglish languagesale 15% off
- Standard21 pagesEnglish and French languagesale 15% off
IEC 62868-2-4:2025 specifies the safety requirements for rigid organic light emitting diode (OLED) tiles and panels for use on supplies up to 120 V ripple free DC for indoor and similar general lighting purposes.
- Standard13 pagesEnglish languagee-Library read for1 day
- Amendment5 pagesEnglish languagee-Library read for1 day
- Amendment13 pagesEnglish languagee-Library read for1 day
- Amendment9 pagesEnglish languagee-Library read for1 day
- Standard38 pagesEnglish and French languagesale 15% off
- Standard37 pagesEnglish and French languagesale 15% off
- Amendment13 pagesEnglish languagee-Library read for1 day
- Amendment5 pagesEnglish languagee-Library read for1 day
IEC 62868-2-4:2025 specifies the safety requirements for rigid organic light emitting diode (OLED) tiles and panels for use on supplies up to 120 V ripple free DC for indoor and similar general lighting purposes.
- Standard13 pagesEnglish languagee-Library read for1 day
IEC 62868-1:2020 specifies general safety requirements of OLED products for use on DC supplies up to 1000 V or AC supplies up to 1000 V at 50 Hz or 60 Hz for indoors and similar general lighting purposes.
This document applies to any OLED light sources which are not covered by IEC 62868-2 (all parts).
This first edition cancels and replaces IEC 62868 published in 2014.
- Standard47 pagesEnglish languagesale 15% off
- Standard41 pagesEnglish and French languagesale 15% off
- Standard20 pagesEnglish and French languagesale 15% off
- Standard13 pagesEnglish and French languagesale 15% off