13.080 - Soil quality. Pedology
ICS 13.080 Details
Soil quality. Pedology
Bodenbeschaffenheit. Bodenkunde
Qualite du sol. Pedologie
Kakovost tal. Pedologija
General Information
Frequently Asked Questions
ICS 13.080 is a classification code in the International Classification for Standards (ICS) system. It covers "Soil quality. Pedology". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 1680 standards classified under ICS 13.080 (Soil quality. Pedology). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 13.080 - Soil quality. Pedology
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document gives an overview and provides guidance on the main methods available to quantify the exchanges of greenhouse gases (CO2, N2O, CH4) and ammonia (NH3) between soils and the atmosphere. It is intended to help users to select the measurement method or methods most suited to their purposes by setting out information on the application domain and the main advantages and limitations of each methods.
- Standard37 pagesEnglish languagesale 15% off
This document specifies a method for quantitative determination of 17 2,3,7,8-chlorine substituted dibenzo-p-dioxins and dibenzofurans and dioxin-like polychlorinated biphenyls in sludge, treated biowaste and soil using liquid column chromatographic clean-up methods and gas chromatography/high resolution mass spectrometry (GC/HRMS). Detection by tandem mass spectrometry (MS/MS) can be used in an equivalent way. The analytes that can be determined with the method specified in this document are listed in Table 1. The limit of detection depends on the kind of sample, the congener, the equipment used and the quality of chemicals used for extraction and clean-up. Under the conditions specified in this document, limits of detection better than 1 ng/kg (expressed as dry matter) can be achieved. This method is “performance based”. The method can be modified if all performance criteria given in this method are met. This document is applicable for several types of matrices and validated for municipal sludge (see also Annex D for the results of the validation). NOTE In principle, this method can also be applied for sediments, mineral wastes and for vegetation. It is the responsibility of the user of this document to validate the application for these matrices. For measurement in complex matrices such as fly ashes adsorbed on vegetation, it can be necessary to further improve the clean-up. This can also apply to sediments and mineral wastes.
- Standard39 pagesEnglish languagesale 15% off
- Standard41 pagesFrench languagesale 15% off
This document specifies the procedure for a quantitative determination of major and trace element concentrations in homogeneous solid waste, soil, soil-like material and sludge by energy dispersive X-ray fluorescence (EDXRF) spectrometry or wavelength dispersive X-ray fluorescence (WDXRF) spectrometry using a calibration with matrix-matched standards.
This document is applicable for the following elements: Na, Mg, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Br, Rb, Sr, Y, Zr, Nb, Mo, Ag, Cd, Sn, Sb, Te, I, Cs, Ba, Ta, W, Hg, Tl, Pb, Bi, Th and U. Concentration levels between a mass fraction of approximately 0,000 1 % and 100 % can be determined depending on the element and the instrument used.
An optional XRF screening method for solid and liquid material as waste, sludge and soil is added in Annex A which provides a total element characterization at a semi-quantitative level, where the calibration is based on matrix-independent calibration curves, previously set up by the manufacturer.
- Standard46 pagesEnglish languagee-Library read for1 day
This document specifies the crucial steps of a quantitative polymerase chain reaction (qPCR) method to measure the abundance of selected microbial gene sequences from soil DNA extract. The number of microbial gene sequences quantified by qPCR provides an estimation of the abundance of selected microbial groups in soil.
- Standard42 pagesEnglish languagee-Library read for1 day
This document provides a generic description of the methods available for measuring soil characteristics and indicators of core ecological soil functions. No distinction of context is made, i.e. no differentiation of land use and management (e.g agricultural, forest, urban, natural or contaminated lands). For each ecological soil function, the document specifically lists biotic and abiotic characteristics that can be measured. It focuses on characteristics and indicators that are either available as ISO documents or published in peer-reviewed papers. This document applies to ecological soil functions and is not applied to soil functions such as geotechnical functions (foundation support for buildings, tunnels, etc.) or geothermal functions. Indeed, ecosystem services do not address soils without a topsoil, or with a covered topsoil (buildings, infrastructure, greenhouse farming, solar panel parks). Methods and indicators for ecological soil functions can help in the assessment of soil-related ecosystem services but the overall assessment of ecosystem services is not covered in this document. Other methods based on proxy indicators (e.g. soil occupation, hydrography parameters) can also be used for land planning at large scale. These indicators are not included in this document.
- Technical specification19 pagesEnglish languagesale 15% off
This document specifies the determination of Cr(VI) in solid waste material and soil by alkaline digestion and ion chromatography with spectrophotometric detection. This method can be used to determine Cr(VI)-mass fractions in solids higher than 0,1 mg/kg.
NOTE In case of reducing or oxidising waste matrix no valid Cr(VI) content can be reported.
- Standard33 pagesEnglish languagee-Library read for1 day
This document specifies an instrumental method for the routine determination of the specific electrical conductivity in an aqueous extract of soil, sludge, biowaste or waste. The determination is carried out to obtain an indication of the content of water-soluble electrolytes in a sample.
This document is applicable to all types of air-dried samples of soil, sludge, biowaste and waste.
- Standard14 pagesEnglish languagee-Library read for1 day
This document specifies a method for the determination of the following elements in aqua regia, nitric acid or mixture of hydrochloric (HCl), nitric (HNO3) and tetrafluoroboric (HBF4)/hydrofluoric (HF) acid digests of soil, treated biowaste, waste, sludge and sediment:
aluminium (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), bismuth (Bi), boron (B), cadmium (Cd), calcium (Ca), cerium (Ce), caesium (Cs), chromium (Cr), cobalt (Co), copper (Cu), dysprosium (Dy), erbium (Er), europium (Eu), gadolinium (Gd), gallium (Ga), germanium (Ge), gold (Au), hafnium (Hf), holmium (Ho), indium (In), iridium (Ir), iron (Fe), lanthanum (La), lead (Pb), lithium (Li), lutetium (Lu), magnesium (Mg), manganese (Mn), mercury (Hg), molybdenum (Mo), neodymium (Nd), nickel (Ni), palladium (Pd), phosphorus (P), platinum (Pt), potassium (K), praseodymium (Pr), rhenium (Re), rhodium (Rh), rubidium (Rb), ruthenium (Ru), samarium (Sm), scandium (Sc), selenium (Se), silicon (Si), silver (Ag), sodium (Na), strontium (Sr), sulfur (S), tellurium (Te), terbium (Tb), thallium (Tl), thorium (Th), thulium (Tm), tin (Sn), titanium (Ti), tungsten (W), uranium (U), vanadium (V), ytterbium (Yb), yttrium (Y), zinc (Zn), and zirconium (Zr).
NOTE 1 Details on validation are given in Annex A.
This method is also applicable for the determination of major, minor and trace elements in aqua regia and nitric acid digests and in eluates of construction products (EN 17200[7]).
NOTE 2 Construction products include e.g. mineral-based products, bituminous products, metals, wood-based products, plastics and rubbers, sealants and adhesives, paints and coatings.
- Standard26 pagesEnglish languagee-Library read for1 day
This document specifies methods for the calculation of the dry matter fraction of sludge, sludge products, treated biowaste, soil and waste for which the results of performed analysis are calculated to the dry matter basis. Depending on the nature and origin of the sample, the calculation is based on a determination of the dry residue (method A) or a determination of the water content (methods A and B). It applies to samples containing more than 1 % (mass fraction) of dry residue or more than 1 % (mass fraction) of water.
Method A applies to sludge, sludge products, treated biowaste, soil and solid waste. Method B applies to liquid waste and to samples which are suspected or known to contain volatiles except for water.
- Standard20 pagesEnglish languagee-Library read for1 day
This document provides definitions, descriptions and a framework for the assessment of ecological soil functions and of related ecosystem services, based on a review of existing documents. It describes the main characteristics of key ecological soil functions and how they relate to soil characteristics and to ecosystem services. This document does not cover non-ecological soil functions, e.g. the support of infrastructures and archives, the provision of raw material.
- Technical specification12 pagesEnglish languagesale 15% off
This document specifies the identification of radionuclides and the measurement of their activity in soil using in situ gamma spectrometry with portable systems equipped with germanium or scintillation detectors.
This document is suitable to rapidly assess the activity of artificial and natural radionuclides deposited on or present in soil layers of large areas of a site under investigation.
This document can be used in connection with radionuclide measurements of soil samples in the laboratory (see ISO 18589-3) in the following cases:
— routine surveillance of the impact of radioactivity released from nuclear installations or of the evolution of radioactivity in the region;
— investigations of accident and incident situations;
— planning and surveillance of remedial action;
— decommissioning of installations or the clearance of materials.
It can also be used for the identification of airborne artificial radionuclides, when assessing the exposure levels inside buildings or during waste disposal operations.
Following a nuclear accident, in situ gamma spectrometry is a powerful method for rapid evaluation of the gamma activity deposited onto the soil surface as well as the surficial contamination of flat objects.
NOTE The method described in this document is not suitable when the spatial distribution of the radionuclides in the environment is not precisely known (influence quantities, unknown distribution in soil) or in situations with very high photon flux. However, the use of small volume detectors with suitable electronics allows measurements to be performed under high photon flux.
- Standard63 pagesEnglish languagee-Library read for1 day
This document specifies the identification of radionuclides and the measurement of their activity in soil using in situ gamma spectrometry with portable systems equipped with germanium or scintillation detectors.
This document is suitable to rapidly assess the activity of artificial and natural radionuclides deposited on or present in soil layers of large areas of a site under investigation.
This document can be used in connection with radionuclide measurements of soil samples in the laboratory (see ISO 18589-3) in the following cases:
— routine surveillance of the impact of radioactivity released from nuclear installations or of the evolution of radioactivity in the region;
— investigations of accident and incident situations;
— planning and surveillance of remedial action;
— decommissioning of installations or the clearance of materials.
It can also be used for the identification of airborne artificial radionuclides, when assessing the exposure levels inside buildings or during waste disposal operations.
Following a nuclear accident, in situ gamma spectrometry is a powerful method for rapid evaluation of the gamma activity deposited onto the soil surface as well as the surficial contamination of flat objects.
NOTE The method described in this document is not suitable when the spatial distribution of the radionuclides in the environment is not precisely known (influence quantities, unknown distribution in soil) or in situations with very high photon flux. However, the use of small volume detectors with suitable electronics allows measurements to be performed under high photon flux.
- Standard63 pagesEnglish languagee-Library read for1 day
This document specifies the identification of radionuclides and the measurement of their activity in soil using in situ gamma spectrometry with portable systems equipped with germanium or scintillation detectors. This document is suitable to rapidly assess the activity of artificial and natural radionuclides deposited on or present in soil layers of large areas of a site under investigation. This document can be used in connection with radionuclide measurements of soil samples in the laboratory (see ISO 18589-3) in the following cases: — routine surveillance of the impact of radioactivity released from nuclear installations or of the evolution of radioactivity in the region; — investigations of accident and incident situations; — planning and surveillance of remedial action; — decommissioning of installations or the clearance of materials. It can also be used for the identification of airborne artificial radionuclides, when assessing the exposure levels inside buildings or during waste disposal operations. Following a nuclear accident, in situ gamma spectrometry is a powerful method for rapid evaluation of the gamma activity deposited onto the soil surface as well as the surficial contamination of flat objects. NOTE The method described in this document is not suitable when the spatial distribution of the radionuclides in the environment is not precisely known (influence quantities, unknown distribution in soil) or in situations with very high photon flux. However, the use of small volume detectors with suitable electronics allows measurements to be performed under high photon flux.
- Standard54 pagesEnglish languagesale 15% off
- Standard55 pagesFrench languagesale 15% off
This document specifies the procedure for a quantitative determination of major and trace element concentrations in homogeneous solid waste, soil, soil-like material and sludge by energy dispersive X-ray fluorescence (EDXRF) spectrometry or wavelength dispersive X-ray fluorescence (WDXRF) spectrometry using a calibration with matrix-matched standards.
This document is applicable for the following elements: Na, Mg, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Br, Rb, Sr, Y, Zr, Nb, Mo, Ag, Cd, Sn, Sb, Te, I, Cs, Ba, Ta, W, Hg, Tl, Pb, Bi, Th and U. Concentration levels between a mass fraction of approximately 0,000 1 % and 100 % can be determined depending on the element and the instrument used.
An optional XRF screening method for solid and liquid material as waste, sludge and soil is added in Annex A which provides a total element characterization at a semi-quantitative level, where the calibration is based on matrix-independent calibration curves, previously set up by the manufacturer.
- Standard46 pagesEnglish languagee-Library read for1 day
This document specifies the procedure for a quantitative determination of major and trace element concentrations in homogeneous solid waste, soil, soil-like material and sludge by energy dispersive X-ray fluorescence (EDXRF) spectrometry or wavelength dispersive X-ray fluorescence (WDXRF) spectrometry using a calibration with matrix-matched standards. This document is applicable for the following elements: Na, Mg, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Br, Rb, Sr, Y, Zr, Nb, Mo, Ag, Cd, Sn, Sb, Te, I, Cs, Ba, Ta, W, Hg, Tl, Pb, Bi, Th and U. Concentration levels between a mass fraction of approximately 0,000 1 % and 100 % can be determined depending on the element and the instrument used. An optional XRF screening method for solid and liquid material as waste, sludge and soil is added in REF Annex_sec_A \r \h Annex A 08D0C9EA79F9BACE118C8200AA004BA90B02000000080000000C00000041006E006E00650078005F007300650063005F0041000000 which provides a total element characterization at a semi-quantitative level, where the calibration is based on matrix-independent calibration curves, previously set up by the manufacturer.
- Standard38 pagesEnglish languagesale 15% off
- Standard40 pagesFrench languagesale 15% off
This document specifies the measurement of strain by means of strain gauges and strainmeters carried out for geotechnical monitoring. General rules of performance monitoring of the ground, of structures interacting with the ground, of geotechnical fills and of geotechnical works are presented in ISO 18674-1. This document is applicable to: — performance monitoring of — 1-D structural members such as piles, struts, props and anchor tendons; — 2-D structural members such as foundation plates, sheet piles, diaphragm walls, retaining walls and shotcrete/concrete tunnel linings; — 3-D structural members such as gravity dams, earth- and rock-fill dams, embankments and reinforced soil structures; — checking geotechnical designs and adjustment of construction in connection with the observational design procedure; — evaluating stability during or after construction. With the aid of a stress-strain relationship of the material, strain data can be converted into stress and/or forces (for 1-D members; see ISO 18674-8) or stresses (for 2-D and 3-D members, see ISO 18674-5). NOTE This document fulfils the requirements for the performance monitoring of the ground, of structures interacting with the ground and of geotechnical works by the means of strain measuring instruments as part of the geotechnical investigation and testing in accordance with References [1] and [2].
- Standard47 pagesEnglish languagesale 15% off
This document specifies the crucial steps of a quantitative polymerase chain reaction (qPCR) method to measure the abundance of selected microbial gene sequences from soil DNA extract. The number of microbial gene sequences quantified by qPCR provides an estimation of the abundance of selected microbial groups in soil.
- Standard42 pagesEnglish languagee-Library read for1 day
This document specifies the crucial steps of a quantitative polymerase chain reaction (qPCR) method to measure the abundance of selected microbial gene sequences from soil DNA extract. The number of microbial gene sequences quantified by qPCR provides an estimation of the abundance of selected microbial groups in soil.
- Standard34 pagesEnglish languagesale 15% off
- Standard35 pagesFrench languagesale 15% off
This document deals with the assessment of human exposure to metals and metalloids from ingestion of soil. It specifies a simplified method for the prediction of the oral bioaccessibility of metals and metalloids from contaminated soils. The method is a chemical extraction using hydrochloric acid (HCl) and can be used at least for first-tier screening for prediction of the oral bioaccessibility of arsenic (As), cadmium (Cd) and lead (Pb) in soil samples. It produces extracts that are representative of the bioaccessible concentrations measured by using the validated unified bioaccessibility method (UBM) (ISO 17924). More specifically, from the extractable concentrations of metals and metalloids by HCl, the predicted bioaccessibility in both the gastric and gastrointestinal phases is calculated using the equations and the prediction intervals provided in this document, and which have been derived from simple linear regressions of data obtained during validation studies.[ REF Reference_ref_2 \r \h 2 08D0C9EA79F9BACE118C8200AA004BA90B0200000008000000100000005200650066006500720065006E00630065005F007200650066005F0032000000 ] NOTE The simplified method is applicable to prediction of the metals and metalloids bioaccessibility in soil with total concentrations range from 2 mg/kg to 2 600 mg/kg for As, from 0,2 mg/kg to 480 mg/kg for Cd, and from 4 mg/kg to 50 000 mg/kg for Pb.
- Standard30 pagesEnglish languagesale 15% off
- Standard30 pagesFrench languagesale 15% off
This document specifies a method for the determination of the following elements in aqua regia, nitric acid or mixture of hydrochloric (HCl), nitric (HNO3) and tetrafluoroboric (HBF4)/hydrofluoric (HF) acid digests of soil, treated biowaste, waste, sludge and sediment:
aluminium (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), bismuth (Bi), boron (B), cadmium (Cd), calcium (Ca), cerium (Ce), caesium (Cs), chromium (Cr), cobalt (Co), copper (Cu), dysprosium (Dy), erbium (Er), europium (Eu), gadolinium (Gd), gallium (Ga), germanium (Ge), gold (Au), hafnium (Hf), holmium (Ho), indium (In), iridium (Ir), iron (Fe), lanthanum (La), lead (Pb), lithium (Li), lutetium (Lu), magnesium (Mg), manganese (Mn), mercury (Hg), molybdenum (Mo), neodymium (Nd), nickel (Ni), palladium (Pd), phosphorus (P), platinum (Pt), potassium (K), praseodymium (Pr), rhenium (Re), rhodium (Rh), rubidium (Rb), ruthenium (Ru), samarium (Sm), scandium (Sc), selenium (Se), silicon (Si), silver (Ag), sodium (Na), strontium (Sr), sulfur (S), tellurium (Te), terbium (Tb), thallium (Tl), thorium (Th), thulium (Tm), tin (Sn), titanium (Ti), tungsten (W), uranium (U), vanadium (V), ytterbium (Yb), yttrium (Y), zinc (Zn), and zirconium (Zr).
NOTE 1 Details on validation are given in Annex A.
This method is also applicable for the determination of major, minor and trace elements in aqua regia and nitric acid digests and in eluates of construction products (EN 17200[7]).
NOTE 2 Construction products include e.g. mineral-based products, bituminous products, metals, wood-based products, plastics and rubbers, sealants and adhesives, paints and coatings.
- Standard26 pagesEnglish languagee-Library read for1 day
This document specifies the determination of Cr(VI) in solid waste material and soil by alkaline digestion and ion chromatography with spectrophotometric detection. This method can be used to determine Cr(VI)-mass fractions in solids higher than 0,1 mg/kg.
NOTE In case of reducing or oxidising waste matrix no valid Cr(VI) content can be reported.
- Standard33 pagesEnglish languagee-Library read for1 day
This document specifies a method for the determination of the following elements in aqua regia, nitric acid or mixture of hydrochloric (HCl), nitric (HNO3) and tetrafluoroboric (HBF4)/hydrofluoric (HF) acid digests of soil, treated biowaste, waste, sludge and sediment: aluminium (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), bismuth (Bi), boron (B), cadmium (Cd), calcium (Ca), cerium (Ce), caesium (Cs), chromium (Cr), cobalt (Co), copper (Cu), dysprosium (Dy), erbium (Er), europium (Eu), gadolinium (Gd), gallium (Ga), germanium (Ge), gold (Au), hafnium (Hf), holmium (Ho), indium (In), iridium (Ir), iron (Fe), lanthanum (La), lead (Pb), lithium (Li), lutetium (Lu), magnesium (Mg), manganese (Mn), mercury (Hg), molybdenum (Mo), neodymium (Nd), nickel (Ni), palladium (Pd), phosphorus (P), platinum (Pt), potassium (K), praseodymium (Pr), rhenium (Re), rhodium (Rh), rubidium (Rb), ruthenium (Ru), samarium (Sm), scandium (Sc), selenium (Se), silicon (Si), silver (Ag), sodium (Na), strontium (Sr), sulfur (S), tellurium (Te), terbium (Tb), thallium (Tl), thorium (Th), thulium (Tm), tin (Sn), titanium (Ti), tungsten (W), uranium (U), vanadium (V), ytterbium (Yb), yttrium (Y), zinc (Zn), and zirconium (Zr). NOTE 1 Details on validation are given in Annex A. This method is also applicable for the determination of major, minor and trace elements in aqua regia and nitric acid digests and in eluates of construction products (EN 17200[ REF Reference_ref_8 \r \h 7]). NOTE 2 Construction products include e.g. mineral-based products, bituminous products, metals, wood-based products, plastics and rubbers, sealants and adhesives, paints and coatings.
- Standard19 pagesEnglish languagesale 15% off
- Standard20 pagesFrench languagesale 15% off
This document specifies an instrumental method for the routine determination of the specific electrical conductivity in an aqueous extract of soil, sludge, biowaste or waste. The determination is carried out to obtain an indication of the content of water-soluble electrolytes in a sample.
This document is applicable to all types of air-dried samples of soil, sludge, biowaste and waste.
- Standard14 pagesEnglish languagee-Library read for1 day
This document specifies methods for the calculation of the dry matter fraction of sludge, sludge products, treated biowaste, soil and waste for which the results of performed analysis are calculated to the dry matter basis. Depending on the nature and origin of the sample, the calculation is based on a determination of the dry residue (method A) or a determination of the water content (methods A and B). It applies to samples containing more than 1 % (mass fraction) of dry residue or more than 1 % (mass fraction) of water.
Method A applies to sludge, sludge products, treated biowaste, soil and solid waste. Method B applies to liquid waste and to samples which are suspected or known to contain volatiles except for water.
- Standard20 pagesEnglish languagee-Library read for1 day
This document specifies the determination of Cr(VI) in solid waste material and soil by alkaline digestion and ion chromatography with spectrophotometric detection. This method can be used to determine Cr(VI)-mass fractions in solids higher than 0,1 mg/kg. NOTE In case of reducing or oxidising waste matrix no valid Cr(VI) content can be reported.
- Standard25 pagesEnglish languagesale 15% off
- Standard27 pagesFrench languagesale 15% off
This document specifies methods for the calculation of the dry matter fraction of sludge, sludge products, treated biowaste, soil and waste for which the results of performed analysis are calculated to the dry matter basis. Depending on the nature and origin of the sample, the calculation is based on a determination of the dry residue (method A) or a determination of the water content (methods A and B). It applies to samples containing more than 1 % (mass fraction) of dry residue or more than 1 % (mass fraction) of water. Method A applies to sludge, sludge products, treated biowaste, soil and solid waste. Method B applies to liquid waste and to samples which are suspected or known to contain volatiles except for water.
- Standard12 pagesEnglish languagesale 15% off
- Standard12 pagesFrench languagesale 15% off
This document specifies an instrumental method for the routine determination of the specific electrical conductivity in an aqueous extract of soil, sludge, biowaste or waste. The determination is carried out to obtain an indication of the content of water-soluble electrolytes in a sample. This document is applicable to all types of air-dried samples of soil, sludge, biowaste and waste.
- Standard7 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
This document defines terms used in the field of soil quality.
- Standard78 pagesEnglish languagee-Library read for1 day
This document specifies methods for quantitative determination of seven selected polychlorinated biphenyls (PCB28, PCB52, PCB101, PCB118, PCB138, PCB153 and PCB180) in soil, sludge, sediment, treated biowaste, and waste using GC-MS and GC-ECD (see Table 2).
The limit of detection depends on the determinants, the equipment used, the quality of chemicals used for the extraction of the sample and the clean-up of the extract.
Under the conditions specified in this document, lower limit of application from 1 μg/kg (expressed as dry matter) for soils, sludge and biowaste to 10 μg/kg (expressed as dry matter) for solid waste can be achieved. For some specific samples the limit of 10 μg/kg cannot be reached.
Sludge, waste and treated biowaste may differ in properties, as well as in the expected contamination levels of PCB and presence of interfering substances. These differences make it impossible to describe one general procedure. This document contains decision tables based on the properties of the sample and the extraction and clean-up procedure to be used.
NOTE The analysis of PCB in insulating liquids, petroleum products, used oils and aqueous samples is referred to in EN 61619, EN 12766-1 and ISO 6468 respectively.
The method can be applied to the analysis of other PCB congeners not specified in the scope, provided suitability is proven by proper in-house validation experiments.
- Standard50 pagesEnglish languagee-Library read for1 day
This document specifies a method of determining the water content of rocks.
This document is applicable to the laboratory determination of the water content of a rock test specimen by oven-drying within the scope of geotechnical investigations. The oven-drying method is the definitive procedure used in usual laboratory practice.
The practical procedure for determining the water content of a rock is to determine the mass loss on drying the test specimen to a constant mass in a drying oven controlled at a given temperature. The mass loss is assumed to be due to free water and is referenced to the remaining dry mass of the test specimen.
NOTE This document fulfils the requirements of the determination of water content of rock for geotechnical investigation and testing according to EN 1997-2.
- Standard17 pagesEnglish languagee-Library read for1 day
This document specifies methods for quantitative determination of seven selected polychlorinated biphenyls (PCB28, PCB52, PCB101, PCB118, PCB138, PCB153 and PCB180) in soil, sludge, sediment, treated biowaste, and waste using GC-MS and GC-ECD (see Table 2).
The limit of detection depends on the determinants, the equipment used, the quality of chemicals used for the extraction of the sample and the clean-up of the extract.
Under the conditions specified in this document, lower limit of application from 1 μg/kg (expressed as dry matter) for soils, sludge and biowaste to 10 μg/kg (expressed as dry matter) for solid waste can be achieved. For some specific samples the limit of 10 μg/kg cannot be reached.
Sludge, waste and treated biowaste may differ in properties, as well as in the expected contamination levels of PCB and presence of interfering substances. These differences make it impossible to describe one general procedure. This document contains decision tables based on the properties of the sample and the extraction and clean-up procedure to be used.
NOTE The analysis of PCB in insulating liquids, petroleum products, used oils and aqueous samples is referred to in EN 61619, EN 12766-1 and ISO 6468 respectively.
The method can be applied to the analysis of other PCB congeners not specified in the scope, provided suitability is proven by proper in-house validation experiments.
- Standard50 pagesEnglish languagee-Library read for1 day
This document specifies a method of determining the water content of rocks.
This document is applicable to the laboratory determination of the water content of a rock test specimen by oven-drying within the scope of geotechnical investigations. The oven-drying method is the definitive procedure used in usual laboratory practice.
The practical procedure for determining the water content of a rock is to determine the mass loss on drying the test specimen to a constant mass in a drying oven controlled at a given temperature. The mass loss is assumed to be due to free water and is referenced to the remaining dry mass of the test specimen.
NOTE This document fulfils the requirements of the determination of water content of rock for geotechnical investigation and testing according to EN 1997-2.
- Standard17 pagesEnglish languagee-Library read for1 day
This document specifies a method of determining the water content of rocks. This document is applicable to the laboratory determination of the water content of a rock test specimen by oven-drying within the scope of geotechnical investigations. The oven-drying method is the definitive procedure used in usual laboratory practice. The practical procedure for determining the water content of a rock is to determine the mass loss on drying the test specimen to a constant mass in a drying oven controlled at a given temperature. The mass loss is assumed to be due to free water and is referenced to the remaining dry mass of the test specimen. NOTE This document fulfils the requirements of the determination of water content of rock for geotechnical investigation and testing according to EN 1997-2.
- Standard9 pagesEnglish languagesale 15% off
- Standard19 pagesFrench languagesale 15% off
This document specifies a method for quick measurement of soil temperature using an infrared (IR) thermometer. The method is applicable to a variety of technical fields, including geology, geotechnics, biology and agricultural sciences, as well as climate change studies and metrological investigation. Note The method designated in this document is recognized as a quick measurement in ISO 4974 and meets the definition of screening method as designated in ISO 12404:2021, 3.2.
- Standard5 pagesEnglish languagesale 15% off
This document specifies a method for the differentiated determination of the organic carbon content (TOC400) which is released at temperatures up to 400 °C, the residual oxidizable carbon (ROC) (including e.g. lignite (brown coal), hard coal, charcoal, black carbon, soot) and the inorganic carbon (TIC900) which is released at temperatures up to 900 °C. The basis of this method is the dry combustion or decomposition of carbon to CO2 in the presence of oxygen or non-oxygen conditions using temperatures ranging from 150 °C to 900 °C in dry solid samples of sediment, soil, soil with anthropogenic admixtures and solid waste (see Table 1) with carbon contents of more than 1 g per kg (0,1 % C) (per carbon type in the test portion). NOTE TIC900’ includes the TIC measured after acid addition e.g. by ISO 10694 or EN 15936. TOC400 is a fraction of TOC measured according to e.g. ISO 10694 or EN 15936.
- Standard22 pagesEnglish languagesale 15% off
This document defines terms used in the field of soil quality.
- Standard78 pagesEnglish languagee-Library read for1 day
This document defines terms used in the field of soil quality.
- Standard63 pagesEnglish languagesale 15% off
- Standard74 pagesFrench languagesale 15% off
This document provides requirements and guidance on key aspects of remediation techniques. It describes the principles, main characteristics, advantages and limitations to be considered in the selection within an option appraisal of individual or combinations of in situ and on-site remediation techniques, including:
— the type of contaminants to be dealt with;
— current and/or intended site use;
— local legal, policy, socio-economic and environmental contexts.
This document is applicable to the remediation of contaminated sites, i.e. where soil, or soil gas, ambient air or groundwater are contaminated. It identifies which phase/matrix can be targeted by a technique, e.g. fluid (groundwater, gas, non-aqueous phase liquid) or solid, and which contaminant it can applied to. This document also provides information on hazards that can be associated with the implementation of remediation.
This document does not provide:
— an exhaustive list of remediation techniques;
— guidance on sites contaminated with radioactive substances, pathogenic or infectious agents, or “pyrotechnic devices” (e.g. unexploded ordnances);
— guidance on ex situ techniques that are set up off-site;
— a framework that covers all individual situations, or prescribes which technique(s) to use in a specific context.
- Standard111 pagesEnglish languagee-Library read for1 day
This document specifies a method for sampling, extracting and preserving macro-invertebrates from soils, including the litter zone.
The sampling and extraction methods in this document are applicable to almost all types of soil, with the exception of soils in extreme climatic conditions (hard, frozen or flooded soils) and matrices other than soil, e.g. tree trunks, plants or lichens.
- Standard26 pagesEnglish languagee-Library read for1 day
This document describes a method for the determination of the oxidizable organic matter content of a soil, which is mainly composed of fresh organic matter and fulvic and humic acids, by back titration with potassium permanganate.
The result obtained with this technical specification is not comparable with those obtained by EN 17685-1:2023 (loss on ignition).
- Technical specification12 pagesEnglish languagee-Library read for1 day
This document specifies a rapid method for assessing solid samples in an aerobic suspension, by determining the inhibition of dehydrogenase activity of Arthrobacter globiformis using the redox dye resazurin.
It is applicable for assessing the effect of water-soluble and solid matter bounded non-volatile contaminants in natural samples, such as soils and waste materials. Although not the main purpose, the contact test can additionally be used for testing the effect of chemicals, as described in the Annex C. The test yields a result within 6 h and can therefore be used for screening potentially contaminated test material.
- Standard35 pagesEnglish languagee-Library read for1 day
This document specifies the crucial steps of a quantitative real-time polymerase chain reaction (qPCR) method to quantify the abundance of specific mRNA molecules extracted from Daphnia magna.
The method allows the identification of molecular responses to exposures for potentially toxic substances through the analysis of the abundance of specific mRNA molecules. In this document, the central genes involved in reproductive and toxic responses are included.
NOTE The selection of genes can be adapted to specific exposure conditions, for example, exposure to known toxic substances, by adding genes known to respond to a specific insult.
The present method allows for rapid, robust and sensitive detection of molecular responses and can be used to analyse the toxic effects of water leachates from soil and waste. The method gives information of the concentration of a substance or test-liquid at which toxic effects begin to occur prior to observations of reproductive or toxic effects at higher levels of organization, which reduces the need for the use of safety factors in toxicity assessment.
The method is useful in several types of risk assessment. In this document, the genes studied are appropriate for the assessment of the risks when recycling materials and for the classification of waste, but the method can be adapted to other types of risk assessment by including other genes.
- Technical specification25 pagesEnglish languagee-Library read for1 day
This document specifies a method for sampling, extracting and preserving collembolans and mites from field soils as a prerequisite for using these animals as bio-indicators (e.g. to assess the quality of a soil as a habitat for organisms).
The sampling and extraction methods of this document are applicable to almost all types of soils. Exceptions can be soils from extreme climatic conditions (hard, frozen or flooded soils) and other matrices than soil, e.g. tree trunks, plants or lichens.
- Standard22 pagesEnglish languagee-Library read for1 day
This document specifies a method for the determination of the potential cation exchange capacity (CEC) of soil buffered at pH = 8,1 and for the determination of the content of exchangeable sodium, potassium, calcium and magnesium in soil. This document is applicable to all types of air-dried soil samples.
- Standard8 pagesEnglish languagesale 15% off
This document specifies test procedures for the determination of effects of contaminated soils or other contaminated samples on the emergence of lettuce seeds. This document is applicable to contaminated soils, soil materials, compost, sludge and chemical testing. It is also applicable to the measurement of effects of substances deliberately added to the soil and to the comparison of soils of known and unknown quality. This document is not applicable for volatile contaminants.
- Standard7 pagesEnglish languagesale 15% off
- Standard8 pagesFrench languagesale 15% off
This document describes a method for the determination of the oxidizable organic matter content of a soil, which is mainly composed of fresh organic matter and fulvic and humic acids, by back titration with potassium permanganate.
The result obtained with this technical specification is not comparable with those obtained by EN 17685-1:2023 (loss on ignition).
- Technical specification12 pagesEnglish languagee-Library read for1 day
This document provides requirements and guidance on key aspects of remediation techniques. It describes the principles, main characteristics, advantages and limitations to be considered in the selection within an option appraisal of individual or combinations of in situ and on-site remediation techniques, including:
— the type of contaminants to be dealt with;
— current and/or intended site use;
— local legal, policy, socio-economic and environmental contexts.
This document is applicable to the remediation of contaminated sites, i.e. where soil, or soil gas, ambient air or groundwater are contaminated. It identifies which phase/matrix can be targeted by a technique, e.g. fluid (groundwater, gas, non-aqueous phase liquid) or solid, and which contaminant it can applied to. This document also provides information on hazards that can be associated with the implementation of remediation.
This document does not provide:
— an exhaustive list of remediation techniques;
— guidance on sites contaminated with radioactive substances, pathogenic or infectious agents, or “pyrotechnic devices” (e.g. unexploded ordnances);
— guidance on ex situ techniques that are set up off-site;
— a framework that covers all individual situations, or prescribes which technique(s) to use in a specific context.
- Standard111 pagesEnglish languagee-Library read for1 day
This document provides requirements and guidance on key aspects of remediation techniques. It describes the principles, main characteristics, advantages and limitations to be considered in the selection within an option appraisal of individual or combinations of in situ and on-site remediation techniques, including: — the type of contaminants to be dealt with; — current and/or intended site use; — local legal, policy, socio-economic and environmental contexts. This document is applicable to the remediation of contaminated sites, i.e. where soil, or soil gas, ambient air or groundwater are contaminated. It identifies which phase/matrix can be targeted by a technique, e.g. fluid (groundwater, gas, non-aqueous phase liquid) or solid, and which contaminant it can applied to. This document also provides information on hazards that can be associated with the implementation of remediation. This document does not provide: — an exhaustive list of remediation techniques; — guidance on sites contaminated with radioactive substances, pathogenic or infectious agents, or “pyrotechnic devices” (e.g. unexploded ordnances); — guidance on ex situ techniques that are set up off-site; — a framework that covers all individual situations, or prescribes which technique(s) to use in a specific context.
- Standard99 pagesEnglish languagesale 15% off
- Standard103 pagesFrench languagesale 15% off
This document specifies a method for sampling, extracting and preserving macro-invertebrates from soils, including the litter zone.
The sampling and extraction methods in this document are applicable to almost all types of soil, with the exception of soils in extreme climatic conditions (hard, frozen or flooded soils) and matrices other than soil, e.g. tree trunks, plants or lichens.
- Standard26 pagesEnglish languagee-Library read for1 day
This document specifies the general requirements, based on ISO 11074 and ISO/IEC 17025, for all steps in the planning (desk study and area reconnaissance) of the sampling and the preparation of samples for testing. It includes the selection of the sampling strategy, the outline of the sampling plan, the presentation of general sampling methods and equipment, as well as the methodology of the pre-treatment of samples adapted to the measurements of the activity of radionuclides in soil including granular materials of mineral origin which contain NORM or artificial radionuclides, such as sludge, sediment, construction debris, solid waste of different type and materials from technologically enhanced naturally occurring radioactive materials (mining, coal combustion, phosphate fertilizer production etc.).
- Standard38 pagesEnglish languagee-Library read for1 day