85/374/EEC - Liability for defective products
Council Directive 85/374/EEC establishes a framework for producer liability in the event of damage caused by defective products within the European Community. It mandates strict liability for producers without fault, covering all movable goods except primary agricultural products and game, unless industrially processed. Liability extends to all parties involved in production, including manufacturers, importers, and those presenting themselves as producers. Injured persons must prove damage, defect, and causation, but can claim full compensation from any liable party, who are jointly and severally liable. A product defect is defined by the lack of safety an average consumer is entitled to expect, considering presentation, expected use, and time of circulation. Producers may be exempted under specific conditions, such as compliance with mandatory regulations or scientific knowledge at the time of circulation. Damage includes death, personal injury, and property damage above a defined threshold. The Directive enforces a limitation period of three years and an absolute expiry of 10 years after product circulation. Contractual liability waivers are prohibited, and Member States may apply certain derogations with Commission oversight. The Directive aims to harmonize consumer protection and promote a functioning common market.
Purpose
Council Directive 85/374/EEC aims to harmonize the laws, regulations, and administrative provisions of EU Member States concerning producer liability for damage caused by defective products. The Directive introduces strict liability for producers without the need to prove fault, ensuring adequate consumer protection and fair risk distribution in the context of technical and industrial product manufacturing. It targets distortions in competition arising from divergent national liability regimes and seeks to guarantee uniform consumer safety expectations within the internal market.
Key Obligations
Producer Liability: Producers are held liable for damage caused by defects in their products (Article 1). Liability is objective-without the requirement to prove fault.
Definition of a Defective Product: A product is defective if it fails to provide the safety a person is entitled to expect, considering all circumstances such as presentation, intended use, and time of circulation (Article 6).
Burden of Proof for Injured Party: The injured person must prove damage, defect, and causal link between defect and damage (Article 4).
Exoneration Conditions for Producers: A producer can avoid liability by proving any of the following:
- They did not put the product into circulation.
- The defect did not exist at the time of circulation or appeared later.
- The product was not manufactured or distributed for economic purposes.
- The defect results from compliance with mandatory public regulations.
- The state of scientific and technical knowledge at the time did not allow the defect to be discovered (Article 7).
Joint and Several Liability: When multiple producers are liable, injured parties can claim full compensation from any liable party (Article 5).
Compensation Scope:
- Death or personal injury.
- Damage to property other than the defective product itself, above a threshold of 500 ECU, limited to private use or consumption (Article 9).
- Non-material damages such as pain and suffering are not prejudiced by this Directive.
Limitation Periods:
- A three-year limitation period starts when the injured party becomes aware of damage, defect, and producer identity (Article 10).
- Liability expires 10 years after the product was circulated, unless proceedings are instituted (Article 11).
No Contractual Derogation: Liability of the producer cannot be limited or excluded by agreement between producer and injured party (Article 12).
Preservation of Other Liability Rights: The Directive does not affect rights arising from other contractual or non-contractual liability systems, including special systems like pharmaceutical product liability (Article 13).
Exclusion of Nuclear Damage: Damage from nuclear accidents governed by international conventions is excluded (Article 14).
Affected Products and Actors
Products Covered: All movable products, including components and raw materials, and electricity fall under the Directive’s scope (Article 2). Primary agricultural products and game are excluded by default unless a Member State chooses otherwise (Article 15).
Producers: Includes manufacturers of finished products, component parts, raw materials, importers into the Community, and persons who present themselves as producers by affixing their name or trademark (Article 3).
Suppliers: If the producer cannot be identified, suppliers are treated as producers unless they disclose the actual producer’s identity (Article 3).
Implementation Timeline
Transposition Deadline: Member States were required to transpose the Directive into national law within three years from its notification date (i.e., by 1988) (Article 19).
Review and Reporting: Every five years, the European Commission must report to the Council on the Directive’s application, accompanied by proposals if needed (Article 21).
Special Derogations and Reviews:
- Member States may derogate to include agricultural products and game.
- Some may exclude the producer’s exoneration based on scientific knowledge, subject to a standstill and notification procedure to the Commission (Article 15).
- Financial limits on aggregate producer liability may be introduced by Member States but are subject to a future review by the Commission and Council (Article 16).
Currency and Threshold Adjustments: The 500 ECU damage threshold is periodically reviewed and adjusted in light of economic and monetary trends (Article 18).
This Directive sets a foundational harmonized framework for product liability across the EU, balancing consumer protection and producer interests while allowing certain flexibilities for Member States.
The Directive applies to all movable products, excluding primary agricultural products and game unless these have undergone industrial processing that could cause defects. It also covers movables used in or installed in immovable property. The scope includes finished products, component parts, and raw materials supplied by producers, as well as importers and those presenting themselves as producers by marking a product with their name or brand. Electricity is considered a product under this Directive. It excludes damage from nuclear accidents and does not apply retroactively to products put into circulation before the Directive's provisions come into force. Member States may extend liability to primary agricultural products and game and may decide not to admit certain producer defenses. The Directive does not override consumer rights under other liability laws or special liability schemes, ensuring broad protection across sectors involving industrially produced goods.
Die Richtlinie 85/374/EWG harmonisiert die Haftung der Hersteller für fehlerhafte Produkte in den Mitgliedstaaten der Europäischen Gemeinschaft, um den Verbraucherschutz zu verbessern und den Binnenmarkt zu stärken. Sie begründet eine verschuldensunabhängige Produkthaftung für industrielle Waren einschließlich solcher, die in Bauwerken verwendet werden, schließt jedoch landwirtschaftliche Naturprodukte und Jagderzeugnisse aus, außer bei industrieller Verarbeitung. Hersteller haften für Schäden durch Produktfehler, wobei der Geschädigte Schaden, Fehler und Kausalzusammenhang beweisen muss. Mehrere Haftungspflichtige haften gesamtschuldnerisch. Die Haftung schließt Todes- und Körperschäden sowie Sachschäden an typischen privaten Gebrauchsgütern mit Selbstbeteiligung ein. Hersteller können sich nur unter engen Voraussetzungen entlasten, etwa durch Nachweis, dass der Fehler nach dem Stand von Wissenschaft und Technik nicht erkennbar war. Die Verjährungsfrist beträgt drei Jahre ab Kenntnis und endet maximal zehn Jahre nach Inverkehrbringen des Produkts. Haftungsbeschränkende Klauseln gegenüber Verbrauchern sind unzulässig. Mitgliedstaaten können landwirtschaftliche Produkte einbeziehen und gewisse Haftungserleichterungen abschaffen. Die Richtlinie bildet die Grundlage für eine einheitliche Produkthaftung in der EU.
Zweck
Die Richtlinie 85/374/EWG zielt darauf ab, die Rechts- und Verwaltungsvorschriften der EU-Mitgliedstaaten bezüglich der Herstellerhaftung für fehlerhafte Produkte zu harmonisieren. Die Angleichung soll Wettbewerbsverzerrungen und Beeinträchtigungen des freien Warenverkehrs im Binnenmarkt verhindern sowie einen einheitlichen und effektiven Verbraucherschutz gewährleisten. Im Zentrum steht die verschuldensunabhängige Haftung, die dem technischen Fortschritt und Produktionsrisiken gerecht wird. Ziel ist die Sicherstellung einer gerechten Risikoaufteilung zwischen Herstellern und Geschädigten bei Schäden durch fehlerhafte Produkte.
Wesentliche Verpflichtungen
- Herstellerhaftung: Hersteller haften für Schäden, die durch fehlerhafte Produkte verursacht wurden (Art. 1).
- Fehlerbegriff: Ein Produkt gilt als fehlerhaft, wenn es nicht die Sicherheit bietet, die unter Berücksichtigung aller Umstände - wie Produktpräsentation, zumutbare Gebrauchserwartungen und Zeitpunkt des Inverkehrbringens - gerechtfertigt ist (Art. 6).
- Beweislast: Der Geschädigte muss Schaden, Fehler und Kausalzusammenhang beweisen; der Hersteller kann sich durch Nachweis bestimmter Umstände entlasten (Art. 4, 7).
- Gesamtschuldnerische Haftung: Bei mehreren Schädigern haftet jeder für den vollen Schaden, unabhängig von innerstaatlichen Rückgriffsrechten (Art. 5).
- Keine Haftungsbeschränkung zugunsten des Herstellers: Haftung darf gegenüber geschädigtem Verbraucher nicht durch Vertragsklauseln eingeschränkt oder ausgeschlossen werden (Art. 12).
- Haftung für Personenschäden und Sachschäden: Umfasst Schaden durch Tod, Körperverletzungen sowie Sachschäden an privaten Gebrauchsgütern unter bestimmten Voraussetzungen (Art. 9).
- Verjährungsregelungen: Schadenersatzansprüche verjähren drei Jahre nach Kenntnis von Schaden, Fehler und Hersteller, spätestens aber zehn Jahre nach Inverkehrbringen (Art. 10, 11).
- Haftungsbegrenzungen: Mitgliedstaaten können die Gesamt-Haftung bei Tod und Körperverletzungen für gleiche fehlerhafte Produkte auf mindestens 70 Mio. ECU begrenzen (Art. 16).
- Ausnahmen und Sonderregelungen: Landwirtschaftliche Naturprodukte und Jagderzeugnisse sind grundsätzlich ausgenommen, können aber von Mitgliedstaaten einbezogen werden. Nukleare Schäden sind ausgeschlossen (Art. 2, 14, 15).
- Weitere Rechte durch nationale Vorschriften bleiben unberührt (Art. 13).
Betroffene Produkte und Akteure
- Produkte: Alle beweglichen Sachen, exklusiv landwirtschaftliche Naturprodukte und Jagderzeugnisse, sofern nicht industriell verarbeitet oder in Bauwerke eingebaut. Elektrizität gilt auch als Produkt (Art. 2).
- Hersteller: Der Produzent des Endprodukts, Grundstoffs oder Teilprodukts, Personen, die sich als Hersteller ausgeben (z. B. durch Anbringen eines Namens oder Warenzeichens), Importeure, und gegebenenfalls Lieferanten, wenn Hersteller nicht bestimmbar sind (Art. 3).
- Geschädigte: Verbraucher, die durch fehlerhafte Produkte körperlichen Schaden oder Sachschaden erleiden.
Umsetzungszeitraum
- Die Mitgliedstaaten mussten die erforderlichen Rechts- und Verwaltungsvorschriften spätestens drei Jahre nach Bekanntgabe der Richtlinie erlassen und in Kraft setzen (Art. 19).
- Die Richtlinie gilt nicht für Produkte, die vor Inkrafttreten der Vorschriften in den Verkehr gebracht wurden (Art. 17).
- Die Kommission legt alle fünf Jahre Bericht über die Anwendung vor und prüft unter anderem die Auswirkung von Abweichungen und Haftungsbegrenzungen (Art. 21, 16 Abs. 2, 15 Abs. 3).
Diese Richtlinie bildet eine wichtige Grundlage für den modernen Produkthaftungsrechtsschutz im Binnenmarkt und begründet eine verschuldensunabhängige Herstellerhaftung zum Schutz der Verbraucher vor den Risiken fehlerhafter industriell hergestellter Produkte.
Die Richtlinie 85/374/EWG gilt für die Haftung von Herstellern für Schäden, die durch fehlerhafte Produkte verursacht wurden. Anwendbar ist sie auf bewegliche Sachen, die industriell hergestellt werden, einschließlich solcher, die bei der Errichtung von Bauwerken verwendet oder eingebaut werden. Landwirtschaftliche Naturprodukte und Jagderzeugnisse sind grundsätzlich ausgenommen, sofern sie nicht industriell verarbeitet wurden. Die Haftung erstreckt sich auf Produkte, die in den Verkehr gebracht oder in die Gemeinschaft eingeführt werden, einschließlich Elektrizität. Hersteller sind neben dem Endproduzenten auch Lieferanten und Importeure. Die Richtlinie umfasst Schäden durch Tod, Körperverletzungen und Sachschäden an privaten Gebrauchsgütern. Ausgeschlossen sind nukleare Schäden, die speziell geregelt sind. Die Richtlinie regelt eine verschuldensunabhängige Produzentenhaftung mit dem Ziel eines einheitlichen Verbraucherschutzes und harmonisiert die Rechtslage in den Mitgliedstaaten.
La directive 85/374/CEE vise à harmoniser la responsabilité du fait des produits défectueux au sein des États membres de l'Union européenne afin de garantir une protection uniforme des consommateurs et d'assurer la libre circulation des marchandises dans le marché commun. Elle établit la responsabilité sans faute du producteur pour les dommages causés par un défaut de ses produits mobiliers, incluant l'électricité et les biens incorporés à des immeubles, mais excluant les matières premières agricoles et les produits de la chasse, sauf transformation industrielle. La directive étend la responsabilité au producteur, à l'importateur, ou à toute personne se présentant comme producteur. La victime doit prouver le dommage, le défaut et le lien de causalité, tandis que la responsabilité est solidaire entre responsables. Un produit est défectueux s’il n’offre pas la sécurité attendue. Le producteur peut s’exonérer en prouvant certains faits, notamment que l’état des connaissances scientifiques au moment de la mise sur le marché ne permettait pas de détecter le défaut. La directive fixe également des délais de prescription et interdit les clauses limitant la responsabilité vis-à-vis des victimes. Les États membres peuvent étendre ou ajuster certaines dispositions sous conditions.
Objet
La directive 85/374/CEE du Conseil du 25 juillet 1985 vise à harmoniser les règles de responsabilité des producteurs au sein des États membres de la Communauté européenne concernant les dommages causés par des produits défectueux. Cette harmonisation répond aux besoins de garantir une protection uniforme des consommateurs, d'assurer la libre circulation des marchandises dans le marché commun, et de résoudre équitablement la répartition des risques liés aux produits techniques. La directive instaure un régime de responsabilité sans faute des producteurs pour les dommages causés par un défaut dans un produit.
Obligations principales
- Responsabilité du producteur : Le producteur est responsable du dommage causé par un défaut de son produit, indépendamment de toute faute (§ Article 1).
- Définition du produit : Il s’agit des biens meubles produits industriellement, incluant l’électricité, mais excluant en principe les matières premières agricoles et les produits de la chasse, sauf s’ils ont subi une transformation industrielle (§ Article 2).
- Définition du producteur : Fabricant du produit fini, d'une matière première, ou d'une partie composante, toute personne se présentant comme producteur (marque, nom), ainsi que l’importateur en Communauté, sont considérés comme producteurs et responsables (§ Article 3).
- Charge de la preuve : La victime doit prouver l’existence du dommage, du défaut du produit et le lien de causalité entre les deux (§ Article 4).
- Caractère défectueux : Un produit est défectueux s’il n’offre pas la sécurité légitimement attendue compte tenu de sa présentation, de son usage raisonnablement attendu, et du moment de sa mise en circulation (§ Article 6).
- Exonérations possibles : Le producteur peut s’exonérer de la responsabilité dans certains cas limitatifs, par exemple s’il prouve qu’il n’a pas mis le produit en circulation, ou que le défaut n’était pas détectable selon l’état des connaissances scientifiques et techniques au moment de la mise sur le marché (§ Article 7).
- Responsabilité solidaire : Lorsque plusieurs personnes sont responsables du même dommage, la victime peut exiger la réparation intégrale de l’une ou l’autre (§ Article 5).
- Dommages couverts : La directive couvre les dommages causés par la mort, les lésions corporelles, ainsi que les dommages matériels à des biens d’usage privé sous condition de déduction d’une franchise (§ Article 9).
- Prescription et extinctivité : L’action en réparation se prescrit dans les trois ans à compter de la connaissance du dommage, du défaut et de l’identité du producteur. Les droits s’éteignent au plus tard 10 ans après la mise en circulation du produit (§ Articles 10 et 11).
- Interdiction de clauses limitant la responsabilité : Les clauses contractuelles limitant ou excluant la responsabilité du producteur sont nulles (§ Article 12).
- Maintien d’autres droits : La directive ne porte pas atteinte aux autres droits à réparation prévus par les législations nationales ou par des régimes spéciaux (§ Article 13).
- Exclusion des dommages nucléaires couverts par d’autres conventions internationales (§ Article 14).
Produits et acteurs concernés
- Produits : Tous biens meubles industriels, y compris électricité, mais hors matières premières agricoles et produits de chasse non transformés industriellement (option d’élargissement possible par État membre).
- Producteurs : Fabricants, producteurs de matières premières ou pièces détachées, personnes utilisant leur nom ou marque sur un produit, importateurs de produits dans la Communauté.
- Victimes : Consommateurs ou usagers subissant des dommages matériels, corporels ou mortels liés à un produit défectueux.
Calendrier de mise en œuvre
- Les États membres disposent d’un délai de trois ans à compter de la notification de la directive (25 juillet 1985) pour transposer les dispositions dans leur droit interne (§ Article 19).
- Tous les cinq ans, la Commission présente un rapport au Conseil sur l’application de la directive, accompagné de propositions si nécessaire (§ Article 21).
- Des dérogations et options nationales sont prévues, notamment sur l’étendue de la définition de produit, la preuve libératoire concernant l’état des connaissances scientifiques à la mise en marché, ainsi que la limitation de responsabilité financière globale pour certains dommages (§ Articles 15 et 16).
- Dix ans après la notification, la Commission doit effectuer un réexamen pour évaluer l’impact des dérogations et envisager leur modification (§ Articles 15 et 16).
Cette directive constitue la base juridique essentielle en matière de responsabilité du fait des produits défectueux dans l’Union européenne, garantissant aux consommateurs un niveau harmonisé de protection tout en favorisant la sécurité juridique des producteurs dans un marché intégré.
La directive 85/374/CEE s'applique à la responsabilité du fait des produits défectueux, couvrant tout bien meuble, à l'exclusion des matières premières agricoles et des produits de la chasse, sauf lorsqu'ils ont subi une transformation industrielle. Elle inclut aussi l'électricité. La directive concerne les produits industriels mis sur le marché, y compris ceux incorporés dans la construction d'immeubles. La responsabilité s'étend au fabricant du produit fini, des parties composantes et des matières premières transformées, ainsi qu’aux importateurs de produits dans la Communauté et à toute personne qui se présente comme producteur en apposant un signe distinctif. Sont exclues les responsabilités pour les produits agricoles non transformés et les dommages nucléaires, lesquels font l'objet de régulations spécifiques. La directive vise des secteurs liés à la production, la transformation et la distribution industrielle de biens meubles destinés à la consommation privée, assurant une protection harmonisée des consommateurs dans l'Union européenne.
Direktiva 85/374/EGS ureja odgovornost proizvajalcev za škodo, povzročeno zaradi napak na njihovih proizvodih, s ciljem enotnega varstva potrošnikov znotraj EU in zagotavljanja prostega pretoka blaga. Odgovornost velja za premične proizvode, razen za primarne kmetijske in lovske proizvode, razen če so bili industrijsko predelani. Proizvajalec vključuje tudi uvoznike in tiste, ki se na proizvodu predstavijo kot proizvajalci. Oškodovanec mora dokazati obstoj napake, škode in vzročne zveze med njima. Odgovornost je solidarna, brez možnosti omejitve s klavzulami. Proizvajalec se lahko oprosti odgovornosti ob dokazih o neobstoju napake v času dajanja proizvoda v promet ali drugih določenih okoliščinah. Direktiva predvideva triletni zastaralni rok za odškodninske zahtevke in desetletni rok, po katerem odgovornost preneha. Izključena je odgovornost za škodo iz jedrskih nesreč. Države članice lahko določijo dodatne ukrepe in nekatere izjeme, pri čemer je zagotovljeno redno spremljanje izvajanja direktive s strani Komisije.
Namen
Direktiva Sveta 85/374/EGS z dne 25. julija 1985 določa pravila za odgovornost proizvajalca za škodo, ki nastane zaradi napake na njegovem proizvodu. Namen direktive je približati zakonodajo držav članic glede te odgovornosti, zagotoviti enotno varstvo potrošnikov ter preprečiti izkrivljanje konkurence in oviranje prostega pretoka blaga na notranjem trgu.
Direktiva uvaja striktno odgovornost proizvajalcev za brezhibnost njihovih proizvodov v primeru škode zaradi napake, da bi pravično razdelila tveganje sodobne tehnološke proizvodnje in povečala varnost potrošnikov.
Ključne obveznosti
- Proizvajalec je odgovoren za škodo, povzročeno zaradi napake na proizvodu.
- Napako proizvoda definira glede na pričakovano varnost ob upoštevanju prezentacije izdelka, predvidljive uporabe in čas dajanja v promet.
- Oškodovanec mora dokazati škodo, napako in vzročno zvezo med njima.
- V primeru več odgovornih oseb za isto škodo so te solidarno odgovorne.
- Proizvajalec ima možnost razbremenitve odgovornosti samo ob dokazih npr. da ni izdal proizvoda v promet, da napaka ni obstajala ob dajanju proizvoda v promet ali da napake ni bilo mogoče odkriti s takratno stopnjo znanosti in tehničnega napredka.
- Omejitve odgovornosti so prepovedane; pogodbeni pogoji ne smejo izključiti ali omejiti proizvajalčeve odgovornosti.
- Oškodovanec lahko zahteva odškodnino za smrt, telesno poškodbo ter za škodo na premoženju (ki mora presegati določen minimalni znesek in se nanašati na blago za zasebno rabo).
- Odgovornost proizvajalca se lahko zmanjša ali izključi ob sokrivdi oškodovanca.
- Države članice morajo v nacionalnih zakonodajah določiti triletni zastaralni rok za uveljavljanje zahtevkov odškodnine, ki teče od dneva, ko je oškodovanec izvedel za škodo, napako in proizvajalca.
- Pravice po direktivi prenehajo deset let po dajanju proizvajalca izdelka v promet.
- Državam članicam je omogočeno, da razširijo področje uporabe direktive na primarne kmetijske in lovske proizvode ter da odpravijo določeno razbremenilno okoliščino glede napredka znanosti.
Vplivani proizvodi in subjekti
- Direktiva se nanaša na vse premične proizvode, ki so industrijsko proizvedeni, razen primarnih kmetijskih proizvodov in lovskih proizvodov, razen če so bili prvič predelani.
- Vključuje tudi premičnine, ki se uporabljajo pri gradnji nepremičnin ali so vgrajene v nepremičnino.
- Zajema električno energijo kot proizvod.
- Proizvajalec je:
- proizvajalec dokončnih izdelkov,
- proizvajalec surovin ali sestavnih delov,
- osebe, ki se z imenom, blagovno znamko ali drugim prepoznavnim znakom predstavljajo kot proizvajalci,
- uvozniki proizvodov v Skupnost.
- Če proizvajalec ni mogoče identificirati, se vsak dobavitelj šteje za proizvajalca, razen če pravočasno poda podatke o proizvajalcu.
Časovnica izvedbe
- Direktiva je bila uradno sporočena državam članicam 30. julija 1985.
- Države članice so imele tri leta časa, da so uskladile svojo nacionalno zakonodajo z direktivo, torej do 30. julija 1988.
- Vsakih pet let Komisija predloži Svetu poročilo o izvajanju direktive in po potrebi predloge za spremembe.
- Države članice lahko po 10 letih od uradnega sporočila predlagajo spremembe glede določil o neodkritosti napake glede na znanost in tehnologijo.
- Prav tako je omogočena desetletna ocena finančne omejitve proizvajalčeve odgovornosti za stanje skupnih škod.
- Zastarel rok za uveljavitev odškodninskih zahtevkov po direktivi je 3 leta od dneva, ko je oškodovanec izvedel za škodo, napako in proizvajalca.
- Pravice za uveljavljanje odškodnine po direktivi prenehajo 10 let po dajanju proizvoda v promet, če med tem obdobjem ni sprožen sodni postopek.
Direktiva 85/374/EEC se nanaša na odgovornost proizvajalcev za škodo, povzročeno zaradi napak na njihovih proizvodih. Uporablja se na premične stvari, razen primarnih kmetijskih in lovskih proizvodov, razen če so bili industrijsko predelani. Zajema tudi premičnine, ki se uporabljajo pri izgradnji nepremičnin ali so vanje vgrajene. Direktiva velja za proizvajalce dokončanih proizvodov, surovin, sestavnih delov, uvoznike proizvodov v Skupnost ter osebe, ki se predstavljajo kot proizvajalci z uporabo imena, blagovne znamke ali drugega znaka na proizvodu. Cilj direktive je zagotoviti enotno varstvo potrošnikov, pravično razdelitev tveganj in skladnost zakonodaje držav članic glede odgovornosti za brezhibnost proizvodov, ki se dajejo na skupni trg EU. Izključuje jedrsko škodo ter določa pravila glede odškodnin in zastaralnih rokov.
General Information
There are no results that match your search criteria
Frequently Asked Questions
An EU Directive is a legislative act of the European Union that sets out goals that all EU member states must achieve. However, it is up to each member state to devise their own laws on how to reach these goals through national transposition. Directives are used to harmonize laws across the EU, particularly for the functioning of the single market.
Directive 85/374/EEC covers "Liability for defective products". There are 0 standards associated with this directive.
Harmonized standards under 85/374/EEC are European standards (ENs) developed by CEN, CENELEC, or ETSI in response to a mandate from the European Commission. When these standards are cited in the Official Journal of the European Union, products manufactured in conformity with them benefit from a presumption of conformity with the essential requirements of 85/374/EEC, facilitating CE marking and free movement within the European Economic Area.