oSIST prEN 17383:2025

SLOVENSKI STANDARD
01-december-2025
Protihrupne ovire za cestni promet - Trajnostnost gradbenih objektov - Okoljske
deklaracije za proizvode - Pravila za kategorije proizvodov za protihrupne ovire za
cestni promet
Road traffic noise reducing devices - Sustainability of construction works - Environmental
product declarations - Product Category Rules for road traffic noise reducing devices
Lärmschutzvorrichtungen an Straßen - Nachhaltigkeit von Bauwerken -
Umweltproduktdeklarationen - Produktkategorieregeln für Lärmschutzvorrichtungen an
Straßen
Dispositifs de réduction du bruit du trafic routier - Contribution des ouvrages de
construction au développement durable - Déclarations environnementales de produits -
Règles de catégorie de produits pour les dispositifs de réduction du bruit du trafic routier
Ta slovenski standard je istoveten z: prEN 17383
ICS:
93.080.30 Cestna oprema in pomožne Road equipment and
naprave installations
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2025
ICS 93.080.30 Will supersede EN 17383:2024
English Version
Road traffic noise reducing devices - Sustainability of
construction works - Environmental product declarations -
Product Category Rules for road traffic noise reducing
devices
Dispositifs de réduction du bruit du trafic routier - Lärmschutzvorrichtungen an Straßen - Nachhaltigkeit
Contribution des ouvrages de construction au von Bauwerken - Umweltproduktdeklarationen -
développement durable - Déclarations Produktkategorieregeln für Lärmschutzvorrichtungen
environnementales de produits - Règles de catégorie an Straßen
de produits pour les dispositifs de réduction du bruit
du trafic routier
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 226.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17383:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Abbreviations . 7
5 General aspects . 7
5.1 Objectives of this complementary PCR . 7
5.2 Types of EPD with respect to life cycle stages covered . 7
5.3 Comparability of EPD for construction products . 8
5.4 Additional environmental information . 9
5.5 Ownership, responsibility and liability for EPD . 9
5.6 Communication formats . 9
6 Product Category Rules for LCA . 9
6.1 Product category . 9
6.2 Life cycle stages and their information modules to be included . 9
6.3 Calculation rules for the LCA . 10
6.4 Inventory analysis . 19
6.5 Impact assessment . 19
7 Content of the EPD . 19
8 Project report . 19
9 Verification and validity of an EPD . 19
Annex A (normative) Requirements and guidance on the reference service life . 20
Annex B (informative) Waste . 21
Annex C (normative) Impact categories and related indicators, methodologies and
characterization factors (CF) . 22
Annex D (informative) End of life formulae . 23
Annex E (informative) Schemes to be applied for data quality assessment of generic and
specific data . 24
Bibliography . 25
European foreword
This document (prEN 17383:2025) has been prepared by Technical Committee CEN/TC 226 “Road
equipment”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 17383:2024.
— …
— …
Introduction
When placing a construction product on the European market the manufacturer can be expected to
present a Declaration of Performance (DoP) with reference to the Basic Work Requirements (BWRs) as
listed in the CPR (Construction Product Regulation EU 3110/2024).
The performance declared with reference to BWR 8 (Sustainable use of natural resources of construction
works) corresponds to the Environmental Product Declaration (EPD) as referred to in
EN 15804:2012+A2:2019, which provides core rules for all construction products and services.
CPR in fact provides the list of the predetermined environmental essential characteristics in Annex II. In
Article 15 of CPR it is also indicated how the environmental essential characteristics must be
progressively covered by the declaration of performance and conformity.
This document provides specific rules for Environmental Product Declarations (EPDs) specifically for
road traffic noise reducing devices (RTNRDs).
It is intended as a supporting standard for the manufacturer to declare the performance of RTNRDs in
the context of the assessment of the sustainability of civil engineering works as in EN 17472:2021.
This document presents Environmental Impact Indicators the RTNRD manufacturers will provide to
declare the performance of RTNRDs with reference to BWR8 and to allow better understanding on how
their product can be considered “sustainable”.
This document is also intended to help manufacturers to identify the materials and product stages with
the most important impact on different sustainability aspects.
Besides manufacturers the following users of this document are foreseen:
— designers when calculating the Life Cycle Assessment (LCA) of the product used;
— third parties implementing infrastructure rating systems to determine how the project of the
construction work has incorporated sustainability;
— procuring entities using the Environmental Impact Indicators in tender specifications to promote
more sustainable solutions and innovations;
— private developers using RTNRDs on their own land like those used on public roads;
Declared Environmental Impact Indicators will be provided according to the valid standards at the time
of product placing on the market.
Besides the standards mentioned in this document, many other c-PCRs (Product Category Rules) have
been published within the Environmental Product Declaration (EPD) schemes but not formally adopted
as European Standards (EN). Instead, they provide sector-specific rules for assessing environmental
impacts and creating EPDs, following the framework set by EN 15804.
1 Scope
This document complements the core rules for the product category of construction products as defined
in EN 15804:2012+A2:2019 and is intended to be used as a c-PCR in conjunction with that standard.
This document applies for RTNRDs in the context of a civil engineering works.
It defines the parameters to be reported, what EPD types (and life cycle stages) to be covered, what rules
to be followed to generate Life Cycle Inventories (LCI) and conduct Life Cycle Impact Assessment (LCIA)
and the data quality to be used in the development of EPDs.
In addition to the common parts of EN 15804:2012+A2:2019, this document for RTNRD
— gives guidance on declared units;
— defines the system boundaries;
— provides guidance/specific rules for the determination of the reference service life;
— gives guidance on the establishment of default scenarios.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 15804:2012+A2:2019, Sustainability of construction works - Environmental product declarations -
Core rules for the product category of construction products
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 15804:2012+A2:2019 and the
following apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— IEC Electropedia: available at https://www.electropedia.org/
— ISO Online browsing platform: available at https://www.iso.org/obp
3.1
road traffic noise reducing device
RTNRD
device that is designed to reduce the propagation of traffic noise away from the road environment
Note 1 to entry: The RTNRD may comprise acoustic elements (3.2) only or both structural (3.3) and acoustic
elements.
Note 2 to entry: Applications of RTNRD include noise barriers (3.5), claddings (3.6), covers (3.7) and added devices
(3.8).
As impacted by EN 15804:2012+A2:2019/AC:2021.
3.2
acoustic element
element whose primary function is to provide the acoustic characteristic of the device
3.3
structural element
element whose primary function is to support or hold in place acoustic elements
3.4
self-supporting acoustic element
acoustic element including its own structural element to support itself
3.5
noise barrier
noise reducing device which obstructs the direct transmission of airborne sound emanating from road
traffic
3.6
cladding
noise reducing device which is attached to a wall or other structure and reduces the amount of sound
reflected
3.7
cover
noise reducing device which either spans or overhangs the road
3.8
added device
added component that influences the acoustic characteristic of the original noise-reducing device
Note 1 to entry: The added device is acting primarily on the diffracted energy.
3.9
reference service life
RSL
service life that a building or an assembled system (part of works) would be expected to have in a
...